Earthquakes and Structures

  • 제20권5호
  • /
  • Pages.531-542
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A comparison of structural analyses procedures for earthquake-resistant design of buildings

  • 투고 : 2021.01.22
  • 심사 : 2021.04.05
  • 발행 : 2021.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Several seismic analysis procedures in the latest standards have been developed for structural design and assessment. Since these methods have different advantages and limitations, a comprehensive comparison of these procedures is required to select the most effective one. The three most common methods are the Equivalent Lateral Force (ELF) method, Modal Response Spectrum (MRS) analysis, and Linear Response History (LRH) analysis. This research intends to present a comparative study of these methods, according to ASCE 7-16 standard by utilizing ETABS® software. They were examined in terms of base shear and distribution of story shear forces for a sixth-story reinforced concrete (RC) building, designed according to ACI 318-19 standard. Building code requirements for RC structures with the dual lateral force-resisting system in a high seismic zone are discussed. The results show that the ELF procedure's base shear for the building under consideration is conservative compared to the MRS or LRH analysis. The vertical distribution of the ELF procedure is just a function of the structure's fundamental period; however, the advantage of the MRS and LRH analysis is that they provide information as to how the distribution of mass and stiffness of a structure influences the member forces and displacements.

키워드

참고문헌

  1. Abrahamson, N. (1992), "Non-stationary spectral matching", Seismol. Res. 63, 30. https://doi.org/10.1785/gssrl.63.1.19
  2. Ademovic, N., Hadzima-Nyarko, M. and Zagora, N. (2020), "Seismic vulnerability assessment of masonry buildings in Banja Luka and Sarajevo (Bosnia and Herzegovina) using the macroseismic model", Bull. Earthq. Eng., 18(8), 3897-3933. https://doi.org/10.1007/s10518-020-00846-8.
  3. Al-sheikh, A. (2019), "ASCE 7-16 Provisions for Lateral Drift Determination", Structure, https://www.structuremag.org/?p=14696.
  4. Al Atik, L. and Abrahamson, N. (2010), "An Improved Method for Nonstationary Spectral Matching", Earthq. Spectra, 26(3), 601-617. https://doi.org/10.1193/1.3459159.
  5. Applied Technology Council (ATC), "ATC Hazards by Location", https://hazards.atcouncil.org/
  6. ASCE/SEI 7-16 (2017), Minimum Design Loads and Associated Criteria for Buildings and Other Structures.
  7. Aswegan, K. and Charney, F.A. (2014), "A Simple Linear Response History Analysis Procedure for Building Codes", Proceedings of the Tenth U.S. National Conference on Earthquake Engineering, Anchorage, Alaska, July.
  8. ATC (1978), Tentative Provisions for the Development of Seismic Regulations for Buildings, Report No. ATC3 ATC3-06, Applied Technology Council, Redwood City, U.S.A.
  9. Bilgin, H. and Uruci, R. (2018), "Effects of structural irregularities on low and mid-rise RC building response", Chall. J. Struct. Mech., 4(2) 33-44. https://doi.org/10.20528/cjsmec.2018.02.001
  10. Bozorgnia, Y., Abrahamson, N.A., Atik, L.A., Ancheta, T.D., Atkinson, G.M., Baker, J.W. and Youngs, R. (2014), "NGAWest2 Research Project", Earthq. Spectra, 30(3), 973-987. https://doi.org/10.1193/072113EQS209M.
  11. Bulajic, B.D., Todorovska, M.I., Manic, M.I. and Trifunac, M.D. (2020), "Structural health monitoring study of the ZOIL building using earthquake records", Soil Dyn. Earthq. Eng., 133, 1-35. https://doi.org/10.1016/j.soildyn.2020.106105.
  12. Charney, F.A., Heausler, T.F. and Marshall, J.D. (2020), "Seismic Loads: Guide to the Seismic Load Provisions of ASCE 7-16", American Society of Civil Engineers, Reston, Virginia, U.S.A.
  13. Chopra, A.K. (2017), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Pearson Education, London, United Kingdom.
  14. CSA A23.3 (2014), Standards Council of Canada - Conseil canadien des normes, Ottawa, Canada. https://www.scc.ca/en/standardsdb/standards/27660
  15. Da Luo, D., Ning, C. and Li, B. (2019), "Effective torsional stiffness of reinforced concrete structural walls", Earthq. Struct., 16(2), 119-127. https://doi.org/10.12989/eas.2019.16.2.000.
  16. ETABS (2019), CSI (Computers and Structures Inc.), Walnut Creek, California.
  17. Fajfar, P. (2018), "Analysis in seismic provisions for buildings: past, present and future", Bull. Earthq. Eng., 16(7), 2567-2608. https://doi.org/10.1007/s10518-017-0290-8.
  18. FEMA (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings, FEMA 273, Applied Technology Council, Redwood City, U.S.A.
  19. FEMA E-74 (2012), Reducing the Risks of Nonstructural Earthquake Damage - A Practical Guide, Applied Technology Council, Redwood City, U.S.A.
  20. FEMA P-2082-1 (2020), NEHRP Recommended Seismic Provisions for New Buildings and Other Structures, Volume I: Part 1 Provisions, Part 2 Commentary, Building Seismic Safety, Council of the National Institute of Building Sciences, Washington, D.C., U.S.A.
  21. FEMA P-58-2 (2008), Seismic Performance Assessment of Buildings, Applied Technology Council, Redwood City, U.S.A.
  22. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, Applied Technology Council, Redwood City, U.S.A.
  23. Ghaemian, S., Muderrisoglu, Z. and Yazgan, U. (2020), "The effect of finite element modeling assumptions on collapse capacity of an RC frame building", Earthq. Struct., 18(5), 555-565. http://dx.doi.org/10.12989/EAS.2020.18.5.555.
  24. Ghosh, S.K. (2016), "Special reinforced concrete shear walls," Structure, https://www.structuremag.org/?p=10157.
  25. Gunay, S., Korolyk, M., Mar, D., Mosalam, K.M. and Rodgers, J. (2009), "Infill walls as a spine to enhance the seismic performance of non-ductile reinforced concrete frames", Proceedings of the ATC and SEI Conference on Improving the Seismic Performance of Existing Buildings and Other Structures, San Francisco, California, United States, December. https://doi.org/10.1061/41084(364)100.
  26. Hadzima-Nyarko, M., Nikic, D. and Pavic, G. (2019), "Seismic vulnerability assessment of reinforced concrete frame structure by finite element analysis", Acta Physica Polonica A, 135(4), 845-848. https://doi.org/10.12693/APhysPolA.135.845.
  27. Hancock, J., Watson-Lamprey, J., Abrahamson, N.A., Bommer, J.J., Markatis, A., Mccoyh, E. and Mendis, R. (2006), "An improved method of matching response spectra of recorded earthquake ground motion using wavelets", J. Earthq. Eng., 10, 67-89. https://doi.org/10.1080/13632460609350629.
  28. Haselton, C.B., Baker, J.W., Stewart, J.P., Whittaker, A.S., Luco, N., Fry, A. and Pekelnicky, R.G. (2017), "Response history analysis for the design of new buildings in the NEHRP provisions and ASCE/SEI 7 standard: Part I - overview and specification of ground motions", Earthq. Spectra, 33(2), 373-395. https://doi.org/10.1193/032114EQS039M.
  29. Head, M., Dennis, S., Muthukumar, S., Nielson, B. and Mackie, K. (2014), "Nonlinear analysis in modern earthquake engineering practice", Structure, https://www.structuremag.org/?p=1666.
  30. Heausler, T.F. (2015), "The most common errors in seismic design", Structure, https://www.structuremag.org/?p=8972.
  31. Isik, E., Aydin, M.C. and Buyuksarac, A. (2020), "24 January 2020 Sivrice (Elazig) earthquake damages and determination of earthquake parameters in the region", Earthq. Struct., 19(2), 145-156. http://dx.doi.org/10.12989/eas.2020.19.2.145.
  32. Johnson, J.G. (2015), "Extreme torsional irregularity", Structure, https://www.structuremag.org/?p=8173.
  33. Kanai, K. and Yoshizawa, S. (1963), "Some new problems of seismic vibrations of a structure. Part 1", Bull. Earthq. Res. Inst., 41, 825-833.
  34. Latifi, R. and Rouhi, R. (2020a), "Seismic assessment and retrofitting of existing RC structures: Seismostruct and Seismobuild implementation", Civil Eng. Architect., 8(2), 84-93. https://doi.org/10.13189/cea.2020.080206.
  35. Latifi, R. and Rouhi, R. (2020b), "Three-dimensional numerical model for seismic analysis of structures", Civil Eng. Architect., 8(3), 237-245. https://doi.org/10.13189/cea.2020.080306.
  36. Li, B. and Mosalam, K.M. (2013), "Seismic performance of reinforced-concrete stairways during the 2008 Wenchuan earthquake", J. Perform. Constr. Facil., 27(6), 721-730. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000382.
  37. Mindlin, R.D. (1951), "Influence of rotatory inertia and shear on flexural motions of isotropic elastic", ASME J. Appl. Mech., 18(1), 31-38. https://doi.org/10.1115/1.4010217
  38. Moehle, J. (2017), Seismic Design of Reinforced Concrete Buildings, McGraw Hill.
  39. Moehle, J.P. and Alarcon, L.F. (1986), "Seismic analysis methods for irregular buildings", J. Struct. Eng., 112(1), 35-52. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:1(35).
  40. Moehle, J.P., Hooper, J.D., Kelly, D.J. and Meyer, T.R. (2010), "Seismic design of cast-in-place concrete diaphragms, chords, and collectors", NEHRP Seismic Design Technical Brief No. 3, produced by the NEHRP Consultants Joint Venture, a partnership of the ATC and the Consortium of Universities for Research in Earthquake Engineering, for the National Institute of Standards and Technology, Gaithersburg, MD.
  41. NIST GCR 11-917-15 (2011), Selecting and Scaling Earthquake Ground Motions for Performing Response-History Analyses, National Institute of Standards and Technology, U.S.A.
  42. NZS 3101 (2021), Concrete Structures Standard, Concrete Design Committee P 3101 for the Standards Council established under the Standards Act 1988. https://www.standards.govt.nz/sponsored-standards/building-standards/nzs3101-1-and-2/.
  43. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures. Wiley.
  44. Rahmani, M. and Todorovska, M.I. (2013), "1D system identification of buildings during earthquakes by seismic interferometry with waveform inversion of impulse responses-method and application to Millikan library", Soil Dyn. Earthq. Eng., 47, 157-174. https://doi.org/10.1016/j.soildyn.2012.09.014.
  45. Rahmani, M. and Todorovska, M.I. (2015), "Structural health monitoring of a 54-story steel frame building using a wave method and earthquake records", Earthq. Spectra, 31(1), 501-525. DOI 10.1193/112912EQS339M.
  46. Reddy, J.N. (2017), Energy Principles and Variational Methods in Applied Mechanics, Wiley.
  47. Reissner, E. (1945), "The effect of shear deformation on the bending of elastic plates", ASME J. Appl. Mech., 12, A68-A77.
  48. Seismosoft (2020), SeismoMatch 2020 - A computer program for Response Spectrum Matching. http://seismosoft.com/
  49. Shehu, R., Angjeliu, G. and Bilgin, H. (2019), "A simple approach for the design of ductile earthquake-resisting frame structures counting for P-Delta effect", Buildings, 9, 216. https://doi.org/10.3390/buildings9100216.
  50. Snieder, R. and Safak, E. (2006), "Extracting the building response using seismic interferometry: theory and application to the Millikan Library in Pasadena, California", Bull. Seism. Soc. Am., 96(2), 586-598. https://doi.org/10.1785/0120050109.
  51. Stewart, J.P., Abrahamson, N.A., Atkinson, G.M., Baker, J.W., Boore, D.M., Bozorgnia, Y. and Sabol, T.A. (2011), "Representation of bidirectional ground motions for design spectra in building codes," Earthq. Spectra, 27(3), 927-937. https://doi.org/10.1193/1.3608001.
  52. Strukar, K., Kalman Sipos, T., Jelec, M. and Hadzima-Nyarko, M. (2019), "Efficient damage assessment for selected earthquake records based on spectral matching", Earthq. Struct., 17(3), 271-282. https://dx.doi.org/10.12989/eas.2019.17.3.271
  53. Timoshenko, S. (1959), Theory of Plates and Shells, McGraw-Hill.
  54. Trifunac, M.D., Todorovska, M.I., Manic, M.I. and Bulajic, B.D. (2010), "Variability of the fixed-base and soil-structure system frequencies of a building-The case of Borik-2 building", Struct. Control Heal. Monit., 17(2), 120-151. https://doi.org/10.1002/stc.277.
  55. Uang, C. and Maarouf, A. (1994), "Deflection Amplification Factor for Seismic Design Provisions", J. Struct. Eng., 120(8), 2423-2436. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2423).
  56. Ugalde, D. and Lopez-Garcia, D. (2017), "Behavior of reinforced concrete shear wall buildings subjected to large earthquakes", Procedia Eng., 199, 3582-3587. https://doi.org/10.1016/j.proeng.2017.09.524.
  57. Vintzileou, E., Zeris, C. and Repapis, C. (2004), "Seismic Behaviour of Existing RC Buildings", Paper No. 2453, Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, August. https://www.iitk.ac.in/nicee/wcee/article/13_2453.pdf.
  58. Wong, J.M., Sommer, A., Briggs, K. and Ergin, C. (2017), "Effective Stiffness for Modeling Reinforced Concrete Structures", Structure, https://www.structuremag.org/?p=10924.