Earthquakes and Structures

  • 제20권6호
  • /
  • Pages.681-696
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimal intensity measure of post-tensioned girder highway bridge using fragility curves

  • Kehila, Fouad (Department of Civil Engineering, National Earthquake Engineering Research Center CGS 01 Rue Kaddour RAHIM) ;
  • Remki, Mustapha (Department of Civil Engineering, National Earthquake Engineering Research Center CGS 01 Rue Kaddour RAHIM) ;
  • Zourgui, Nadjib Hemaidi (High National School of Built and Ground Works ENSTP) ;
  • Kibboua, Abderrahmane (Department of Civil Engineering, National Earthquake Engineering Research Center CGS 01 Rue Kaddour RAHIM) ;
  • Bechtoula, Hakim (Department of Civil Engineering, National Earthquake Engineering Research Center CGS 01 Rue Kaddour RAHIM)
  • 투고 : 2021.02.10
  • 심사 : 2021.05.17
  • 발행 : 2021.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Over the last decade, Algeria has realized the highway project. It covers more than 1,200 km joining Algeria's eastern and western borders in the northern part of the country. This region is characterized by a high level of seismic activity. In total, this project contains more than 530 bridges, knowing that the design of these bridges was carried out with a simplified method namely the coefficient method, and does not comply with the requirements of the new Algerian seismic code for bridges RPOA-2008. For this reason, the development of fragility curves for these structures is necessary. This paper aims to develop analytical fragility curves for component and system fragility curves for post-tensioned girder highway bridges that represent the most common configuration in Algeria taking into account different spectral intensity measurements and the soil class based on the shear wave velocity specified in the Algerian bridge design code. Incremental dynamic analysis (IDA) is performed longitudinally on the bridge. Sixty seismic ground motions are scaled and employed for the time history nonlinear analysis. A variety of intensity measurements are chosen and the optimal intensity measurement with the lowest dispersion is proposed.

키워드

과제정보

This research was supported by the National Earthquake Engineering Research Center, CGS, Algeria.

참고문헌

  1. Aviram, A., Mackie, K.R. and Stojadinovic, B. (2008), "Effect of abutment modeling on the seismic response of bridge structures", Earthq. Eng. Eng. Vib., 7(4), 395-402. https://doi.org/10.1007/s11803-008-1008-3.
  2. Avsar, O., Yakut, A. and Caner, A. (2011), "Analytical fragility curves for ordinary highway bridges in turkey", Earthq. Spectra., 27(4), 971-996. https://doi.org/10.1193/1.3651349.
  3. Bayat, M., Ahmadi, H.R., Kia, M. and Cao, M. (2019), "Probabilistic seismic demand of isolated straight concrete girder highway bridges using fragility functions", Advan. Concrete Constr., 7(3), 183-189. http://dx.doi.org/10.12989/acc.2019.7.3.183.
  4. Bayat, M., Daneshjoo, F. and Nistico, N. (2015), "A novel proficient and sufficient intensity measure for probabilistic analysis of skewed highway bridges", Struct. Eng. Mech., 55(6), 1177-1202. https://doi.org/10.12989/sem.2015.55.6.1177.
  5. Bhuiyan, A.R. and Alam, M.S. (2013), "Seismic performance assessment of highway bridges equipped with superelastic shape memory alloy-based laminated rubber isolation bearing", Eng. Struct., 49, 396 - 407. https://doi.org/10.1016/j.engstruct.2012.11.022.
  6. Billah, A.H.M.M. and Alam, M.S. (2015), "Seismic fragility assessment of concrete bridge pier reinforced with superelastic shape memory alloy", Earthq. Spectra., 31(3), 1515-1541. https://doi.org/10.1193%2F112512EQS337M. https://doi.org/10.1193%2F112512EQS337M
  7. Billah, A.H.M.M. and Alam, M.S. (2015), "Seismic fragility assessment of highway bridges: a state-of-the-art review", Struct. Infras. Eng., 11(6), 804-832. https://doi.org/10.1080/15732479.2014.912243 .
  8. CGS-JICA (2006), "A Study of Seismic Microzoning of the Wilaya of Algiers in the People's Democratic Republic of Algeria", final report:volume 1; Japan International Cooperation Agency.
  9. Chen, F., Gu, X., Shan, D., Dong, J. and Li, Q. (2018), "Seismic fragility analysis of irregular continuous rigid frame girder bridge", Cogent Eng., 5(1). 1-18. https://doi.org/10.1080/23311916.2018.1545741.
  10. Choi, E., DesRoches, R. and Nielson, B. (2004), "Seismic fragility of typical bridges in moderate seismic zones", Eng. Struct., 26(2), 187 - 199. https://doi.org/10.1016/j.engstruct.2003.09.006.
  11. Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002), "Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines", J. Struct. Eng., 128(4), 526-533. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526).
  12. FEMA (2003), Multi-hazard loss estimation methodology: Earthquake model, Federal Emergency Management Agency, Washington, DC, U.S.A.
  13. Filippou, F.C., Popov, E.P. and Bertero, V.V. (1983), "Effects of bond deterioration on hysteretic behavior of reinforced concrete joints," Report No. UCB/EERC-83/19, Earthquake Engineering Research Center, University of California, Berkeley.
  14. Izzuddin, B.A. (1991), "Nonlinear dynamic analysis of framed structures", Ph.D. Thesis, Department of Civil Engineering, Imperial College, London.
  15. Izzuddin, B.A., Karayannis, C.G. and Elnashai, A.S. (1994), "Advanced nonlinear formulation for reinforced concrete beam-columns", J. Struct. Eng., 120(10), 2913-2934. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2913).
  16. Jeon, J.S., Shafieezadeh, A. and DesRoches, R. (2018), "Component fragility assessment of a long, curved multi-frame bridge: Uniform excitation versus spatially correlated ground motions", Struct. Eng. Mech., 65(5), 633-644. http://dx.doi.org/10.12989/sem.2018.65.5.633.
  17. Kappos, A. (2014), "Seismic analysis of concrete bridges: numerical modeling", In: Beer M., Kougioumtzoglou I., Patelli E., Au IK. Encyclopedia of Earthquake Engineering, Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-36197-5.
  18. Kar, D. and Roy, R. (2016), "Seismic behavior of RC bridge piers under bidirectional excitations: implications of site effects", J. Earthq. Eng., 22(2), 303-331. https://doi.org/10.1080/13632469.2016.1233919.
  19. Karayannis, C.G., Izzuddin, B.A. and Elnashai, A.S. (1994), "Application of adaptive analysis to reinforced concrete frames", J. Struct. Eng., 120(10), 2935-2957. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2935).
  20. Kehila, F., Kibboua, A., Bechtoula, H. and Remki, M. (2018), "Seismic performance assessment of R.C. bridge piers designed with the Algerian seismic bridges regulation", Earthq. Struct., 15(6), 701-713. https://doi.org/10.12989/eas.2018.15.6.701.
  21. Kibboua, A., Bechtoula, H., Mehani, Y. and Naili, M. (2014), "Vulnerability assessment of reinforced concrete bridge structures in Algiers using scenario earthquakes", Bull. Earthq. Eng., 12(2), 807-827. https://doi.org/10.1007/s10518-013-9523-7.
  22. Kibboua, A., Naili, M., Benouar, D. and Kehila, F. (2011), "Analytical fragility curves for typical Algerian reinforced concrete bridge piers", Struct. Eng. Mech., 39(3), 411-425. https://doi.org/10.12989/sem.2011.39.3.411.
  23. Luco, N. and Cornell, C.A. (2007), "Structure-specific scalar intensity measures for near-source and ordinary earthquake ground motions", Earthq. Spectra., 23(2), 357-392. https://doi.org/10.1193%2F1.2723158. https://doi.org/10.1193%2F1.2723158
  24. Mackie, K. and Stojadinovic, B. (2001), "Probabilistic seismic demand model for california highway bridges", J. Bridge Eng., 6(6), 468-481. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(468).
  25. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  26. Mao, J., Jia, D., Yang, Z. and Xiang, N. (2019), "Seismic performance of concrete bridge piers reinforced with hybrid shape memory alloy (SMA) and steel bars", J. Earthq. Tsunami., 14(01), 2050001. https://doi.org/10.1142/S1793431120500013.
  27. Menegotto, M. and Pinto, P.E. (1973), Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and nonelastic behaviour of elements under combined normal force and bending. Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, International Association for Bridge and Structural Engineering, Zurich, Switzerland,
  28. Mosleh, A., Razzaghi, M.S., Jara, J. and Varum, H. (2016), "Development of fragility curves for RC bridges subjected to reverse and strike-slip seismic sources", Earthq. Struct., 11(3), 517-538. https://doi.org/10.12989/eas.2016.11.3.517.
  29. Padgett, J.E., Nielson, B.G. and DesRoches, R. (2008), "Selection of optimal intensity measures in probabilistic seismic demand models of highway bridge portfolios", Earthq. Eng. Struct. Dyn., 37(5), 711-725. https://doi.org/10.1002/eqe.782.
  30. PEER Ground motions database (2020), Pacific Earthquake Engineering Research Center (PEER), https://ngawest2.berkeley.edu/.
  31. Ramanathan, K., DesRoches, R. and Padgett, J.E. (2012), "A comparison of pre- and post-seismic design considerations in moderate seismic zones through the fragility assessment of multi span bridge classes", Eng. Struct., 45, 559-573. https://doi.org/10.1016/j.engstruct.2012.07.004.
  32. RPOA (2008), Algerian Seismic Regulation Code for Bridge Structures, Ministere des travaux publics. Algiers, Algeria.
  33. SeismoMatch (2020), A Computer Program for Spectrum Matching of Earthquake Records, SeismoSoft, Pavia, Italy, https://seismosoft.com.
  34. SeismoStruct (2020), A Computer Program for Static and Dynamic Nonlinear Analysis of Framed Structures, SeismoSoft, Pavia, Italy, https://seismosoft.com.
  35. Sfahani, M. G. and Guan, H. (2018), "An extended cloud analysis method for seismic fragility assessment of highway bridges ", Earthq. Struct., 15(6), 605-616. https://doi.org/10.12989/eas.2018.15.6.605.
  36. Vamvatsikos, D. and Cornell, C. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  37. Wang, Q., Wu, Z. and Liu, S. (2018), "Multivariate probabilistic seismic demand model for the bridge multidimensional fragility analysis", KSCE J. Civil Eng., 22(9), 3443-3451. https://doi.org/10.1007/s12205-018-0414-y.
  38. Zhong, J., Pang, Y., Jeon, J.S., DesRoches, R. and Yuan, W. (2016), "Seismic fragility assessment of long-span cable-stayed bridges in China", Adv. Struct. Eng., 19(11), 1797-1812. https://doi.org/10.1177%2F1369433216649380. https://doi.org/10.1177%2F1369433216649380
  39. Zourgui, N.H., Kibboua, A. and Taki, M. (2018), "Using full bridge model to develop analytical fragility curves for typical concrete bridge piers", Gradevinar., 70(6), 519-530. https://doi.org/10.14256/JCE.2137.2017.