Advances in nano research

  • 제10권6호
  • /
  • Pages.517-529
  • /
  • 2021
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The economic and management use of rhododendron petals in potas-sium-ion nano batteries anode via efficient computer simulation

  • Dai, Wensheng (Financial School, China Financial Policy Research Center, International Monetary Institute, Renmin University of China) ;
  • Zand, Yousef (Department of Civil Engineering,Tabriz Branch, Islamic Azad University) ;
  • Agdas, Alireza Sadighi (Ghateh Gostar Novin Company) ;
  • Selmi, Abdellatif (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Roco-Videla, Angel (Programa Magister en ciencias quimico-biologicas, Facultad de Ciencias de la Salud, Universidad Bernardo O'Higgins) ;
  • Wakil, Karzan (Department of Computer, College of Science, University of Halabja) ;
  • Issakhov, Alibek (Al-Farabi Kazakh National University)
  • 투고 : 2020.01.21
  • 심사 : 2021.02.19
  • 발행 : 2021.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Nano batteries are manufactured batteries which use nanoscale technology, small particles measuring less than 100 nanometers or 10-7 meters. In addition, because of plentiful potassium supplies and less cost, potassium-ion batteries (PIBs) are taken as possible substitutes for lithium-ion batteries for massive energy storing systems. Our modern lifestyle could be totally different without rechargeable batteries. Regarding their economic and management usage, these batteries are applied in electric and hybrid vehicles, devices, and renewable power generation systems. Accordingly, regarding the huge K ion radius, it is a difficult process for identifying relevant materials with excellent cycling stability and capacity. At present, the production of suitable anode materials with high specific capacities, long cycle life and low costs for PIBs remains a major challenge. Also, the continuing improvement in defining future electors, the manufacture of PIBs has been complicated by multiple challenges, namely low reversible performance, insufficient cycling stability and poor energy density, all of which have created important doubts for the effective implications of PIBs. Nano-particles have shown various advantages for enhanced energy and power density, cyclability and safety when it comes to designing and producing electrode materials via efficient computer simulation. In combination with large volume expansion, slow reaction kinetics, and low electrical conductivity the main cause for the degradation of SnO2 reaction reversibility and power decay observed are not as obvious as those of Lithium-ion batteries (LIBs) as anodes of sodium-ion batteries (SIBs), and potassium-ion batteries (KIBs).

키워드

참고문헌

  1. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034.
  2. Afsar Dizaj, E., Fanaie, N. and Zarifpour, A. (2018), "Probabilistic seismic demand assessment of steel frames braced with reduced yielding segment buckling restrained braces", Adv. Struct. Eng., 21(7), 1002-1020. https://doi.org/10.1177%2F1369433217737115. https://doi.org/10.1177%2F1369433217737115
  3. Al Kajbaf, A., Fanaie, N. and Najarkolaie, K.F. (2018), "Numerical simulation of failure in steel posttensioned connections under cyclic loading", Eng. Fail. Anal., 91, 35-57. https://doi.org/10.1016/j.engfailanal.2018.04.024.
  4. Alaskar, A., Shah, S., Keerio, M.A., Phulpoto, J.A., Baharom, S., Assilzadeh, H., Alyousef, R., Alabduljabbar, H. and Mohamed, A.M. (2020a), "Development of Pozzolanic material from clay", Adv. Concrete Construct., Int. J., 10(4), 301-310. https://doi.org/10.12989/acc.2020.10.4.301.
  5. Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L. S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020b), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., Int. J., 35(2), 187-197. https://doi.org/10.12989/scs.2020.35.2.187.
  6. Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., Int. J., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147.
  7. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel and Composote Structurees. http://doi.org/10.3850/978-981-08-6218-3_CCFr003.
  8. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. http://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  9. Asadolahi, S.M. and Fanaie, N. (2020), "Performance of selfcentering steel moment frame considering stress relaxation in prestressed cables", Adv. Struct. Eng., 1369433219900940. https://doi.org/10.1177%2F1369433219900940. https://doi.org/10.1177%2F1369433219900940
  10. Baumann, M., Domnik, T., Haase, M., Wulf, C., Emmerich, P., Rosch, C., Zapp, P., Naegler, T. and Weil, M. (2021), "Comparative patent analysis for the identification of global research trends for the case of battery storage, hydrogen and bioenergy", Technol. Forecast. Social Change, 165, 120505. https://doi.org/10.1016/j.techfore.2020.120505.
  11. Cao, Y., Alyousef, R., Baharom, S., Shah, S., Alaskar, A., Alabduljabbar, H., Mustafa Mohamed, A. and Assilzadeh, H. (2020a), "Dynamic attainment of mixed aspect ratio for concrete members reinforced with steel fiber under impact loading", Mech. Adv. Mater. Struct., 1-10. https://doi.org/10.1080/15376494.2020.1847371.
  12. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020b), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Structures, 22. https://doi.org/10.1016/j.istruc.2020.05.031.
  13. Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020c), "Application of extreme learning machine in behavior of beam to column connections", Structures, 25. https://doi.org/10.1016/j.istruc.2020.03.058.
  14. Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020d), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct. Int. J., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567.
  15. Chahnasir, E.S., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413.
  16. Chen, Y., He, L., Li, J. and Zhang, S. (2018), "Multi-criteria design of shale-gas-water supply chains and production systems towards optimal life cycle economics and greenhouse gas emissions under uncertainty", Comput. Chem, Eng., 109, 216-235. https://doi.org/10.1016/j.compchemeng.2017.11.014.
  17. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compose. Struct., Int. J., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.
  18. Chen, M.-J., Nguyen, D.Q.A. and Tran, T.C. (2020), "ZnO nanoarticles in bettering the color uniformity of phosphorconverted white LED lights", J. Adv. Eng. Computat., 4(3), 173-180. http://doi.org/10.25073/jaec.202043.280.
  19. Cheng, F., Chen, J., Gou, X. and Shen, P. (2005), "High-power alkaline Zn-MnO2 batteries using γ-MnO2 nanowires/nanotubes and electrolytic zinc powder", Adv. Mater., 17(22), 2753-2756. https://doi.org/10.1002/adma.200500663.
  20. Chernogorov, I., Polyakh, V. and Yarakhmedov, O. (2017), "Search optimization opportunities of modified self-organizing migrating algorithm in multi-extremal tasks environment", J. Adv. Eng. Computat., 1(2), 144-152. http://doi.org/10.25073/jaec.201712.60.
  21. Choi, Y., Jung, B., Lee, D., Jeong, J., Kim, K., Ahn, H., Cho, K. and Gu, H. (2007), "Electrochemical properties of sulfur electrode containing nano Al2O3 for lithium/sulfur cell", Physica Scripta, 2007(T129), 62. http://doi.org/10.1088/00318949/2007/T129/014.
  22. Chowdhury, I.A. (2021), "Performance Analysis of a SWIPT Enabled UAV-Assisted Relaying", J. Adv. Eng. Computat., 5(1), 19-26. http://doi.org/10.25073/jaec.202151.310.
  23. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/ijps11.1585.
  24. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., Int. J., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  25. Dinh-Cong, D., Keykhosravi, M.H., Alyousef, R., Salih, M.N., Nguyen, H., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Poi-Ngian, S. (2019), "The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate", Smart Struct. Syst., Int. J., 24(4), 541-552. https://doi.org/10.12989/sss.2019.24.4.541.
  26. Douglas, A., Carter, R., Oakes, L., Share, K., Cohn, A.P. and Pint, C.L. (2015), "Ultrafine iron pyrite (FeS2) nanocrystals improve sodium-sulfur and lithium-sulfur conversion reactions for efficient batteries", ACS Nano, 9(11), 11156-11165. https://doi.org/10.1021/acsnano.5b04700.
  27. Dyatlov, S., Didenko, N., Ivanova, E., Soshneva, E. and Kulik, S. (2020), "Prospects for alternative energy sources in global energy sector", In IOP Conference Series: Earth Environ. Sci., IOP Publishing. http://doi.org/10.1088/1755-1315/434/1/012014.
  28. Fanaie, N. and Ezzatshoar, S. (2014), "Studying the seismic behavior of gate braced frames by incremental dynamic analysis (IDA)", J. Construct. Steel Res., 99, 111-120. https://doi.org/10.1016/j.jcsr.2014.04.008.
  29. Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int. J., 19(2), 485-501. https://doi.org/10.12989/scs.2015.19.2.485.
  30. Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016), "Strengthening of moment-resisting frame using cable-cylinder bracing", Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177%2F1369433216649382. https://doi.org/10.1177%2F1369433216649382
  31. Fujita, T., Chen, H., Wang, K.T., He, C.L., Wang, Y.B., Dodbiba, G. and Wei, Y.Z. (2021), "Reduction, reuse and recycle of spent Li-ion batteries for automobiles: A review", Int. J. Miner., Metall. Mater., 28(2), 179-192. https://doi.org/10.1007/s12613-020-2127-8.
  32. Ghanbari-Ghazijahani, T., Nabati, A., Azandariani, M.G. and Fanaie, N. (2020), "Crushing of steel tubes with different infills under partial axial loading", Thin Wall. Struct., 149, 106614. https://doi.org/10.1016/j.tws.2020.106614.
  33. Goudarzi, A., Ghassemieh, M., Fanaie, N., Laefer, D.F. and Baei, M. (2016), "Axial load effects on flush end-plate moment connections", Proceedings of the Institution of Civ. Engineers-Structures and Buildings 170(3), 199-210. https://doi.org/10.1680/jstbu.15.00042.
  34. Guo, L.-f., Zhang, S.-y., Xie, J., Zhen, D., Jin, Y., Wan, K.-y., Zhuang, D.-g., Zheng, W.-q. and Zhao, X.-b. (2020), "Controlled synthesis of nanosized Si by magnesiothermic reduction from diatomite as anode material for Li-ion batteries", Int. J. Miner., Metall. Mater., 27(4), 515-525. https://doi.org/10.1007/s12613-019-1900-z.
  35. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019a), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci, Eng., 41(5), 1-15. https://doi.org/10.1007/s40430-019-1715-x.
  36. Habibi, M., Taghdir, A. and Safarpour, H. (2019b), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B-Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  37. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  38. Han, Y., Liu, S.-y., Cui, L., Xu, L., Xie, J., Xia, X.-K., Hao, W.-K., Wang, B., Li, H. and Gao, J. (2018), "Graphene-immobilized flower-like Ni3S2 nanoflakes as a stable binder-free anode material for sodium-ion batteries", Int. J. Miner. Metall. Mater., 25(1), 88-93. https://doi.org/10.1007/s12613-018-1550-6.
  39. He, M., Kravchyk, K., Walter, M. and Kovalenko, M.V. (2014), "Monodisperse antimony nanocrystals for high-rate Li-ion and Na-ion battery anodes: Nano versus bulk", Nano Lett., 14(3), 1255-1262. https://doi.org/10.1021/nl404165c.
  40. Hou, H., Jing, M., Yang, Y., Zhu, Y., Fang, L., Song, W., Pan, C., Yang, X. and Ji, X. (2014), "Sodium/lithium storage behavior of antimony hollow nanospheres for rechargeable batteries", ACS Appl. Mater. Interf., 6(18), 16189-16196. https://doi.org/10.1021/am504310k.
  41. Hu, Y., Chen, Q., Feng, S. and Zuo, C. (2020), "Microscopic fringe projection profilometry: A review", Opt. Laser. Eng., 106192. https://doi.org/10.1016/j.optlaseng.2020.106192.
  42. Huang, J., Alyousef, R., Suhatril, M., Baharom, S., Alabduljabbar, H., Alaskar, A. and Assilzadeh, H. (2020), "Influence of porosity and cement grade on concrete mechanical properties", Adv. Concrete Construct., Int. J., 10(5), 393-402. https://doi.org/10.12989/acc.2020.10.5.393.
  43. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  44. Iost, R.M., Crespilho, F.N., Kern, K. and Balasubramanian, K. (2016), "A primary battery-on-a-chip using monolayer graphene", Nanotechnology, 27(29), 29LT01. https://doi.org/10.1088/0957-4484/27/29/29LT01.
  45. Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Sadeghipour Chahnasir, E., Porbar, A., Heydari, A. and khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., Int. J., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  46. Jahanbakhti, E., Fanaie, N. and Rezaeian, A. (2017), "Experimental investigation of panel zone in rigid beam to box column connection", J. Construct. Steel Res., 137, 180-191. https://doi.org/10.1016/j.jcsr.2017.06.025.
  47. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. 4061-4072. https://doi.org/10.5897/IJPS11.1324.
  48. Kang, Y., Zhang, Y.-H., Shi, Q., Shi, H., Xue, D. and Shi, F.-N. (2021), "Highly efficient Co3O4/CeO2 heterostructure as anode for lithium-ion batteries", J. Coll. Interf. Sci., 585, 705-715. https://doi.org/10.1016/j.jcis.2020.10.050.
  49. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.-T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  50. Kim, M.G., Sim, S. and Cho, J. (2010), "Novel core-shell Sn-Cu anodes for lithium rechargeable batteries prepared by a redox-transmetalation reaction", Adv. Mater., 22(45), 5154-5158. https://doi.org/10.1002/adma.201002480.
  51. Kim, H., Kim, S.-W., Hong, J., Park, Y.-U. and Kang, K. (2011a), "Electrochemical and ex-situ analysis on manganese oxide/graphene hybrid anode for lithium rechargeable batteries", J. Mater. Res., 26(20), 2665. https://doi.org/10.1557/jmr.2011.301.
  52. Kim, H., Seo, D.-H., Kim, S.-W., Kim, J. and Kang, K. (2011b), "Highly reversible Co3O4/graphene hybrid anode for lithium rechargeable batteries", Carbon, 49(1), 326-332. https://doi.org/10.1016/j.carbon.2010.09.033.
  53. Kim, S.-W., Lee, H.-W., Muralidharan, P., Seo, D.-H., Yoon, W.-S., Kim, D.K. and Kang, K. (2011c), "Electrochemical performance and ex situ analysis of ZnMn2O4 nanowires as anode materials for lithium rechargeable batteries", Nano Res., 4(5), 505-510. https://doi.org/10.1007/s12274-011-0106-0.
  54. Lei, Z., Hao, S., Yang, J. and Dan, X. (2020), "Study on solid waste pyrolysis coke catalyst for catalytic cracking of coal tar", Int. J. Hydrogen Energ., 45(38), 19280-19290. https://doi.org/10.1016/j.ijhydene.2020.05.075.
  55. Lei, Z., Hao, S., Yang, J., Zhang, L., Fang, B., Wei, K., Lingbo, Q., Jin, S. and Wei, C. (2021), "Study on denitration and sulfur removal performance of Mn-Ce supported fly ash catalyst", Chemosphere, 270, 128646. https://doi.org/10.1016/j.chemosphere.2020.128646.
  56. Li, H., Huang, X. and Chen, L. (1999), "Electrochemical impedance spectroscopy study of SnO and nano-SnO anodes in lithium rechargeable batteries", J. Power Sources, 81, 340-345. https://doi.org/10.1016/S0378-7753(99)00214-1.
  57. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., Int. J., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  58. Liu, Y., Zhang, B., Xiao, S., Liu, L., Wen, Z. and Wu, Y. (2014), "A nanocomposite of MoO3 coated with PPy as an anode material for aqueous sodium rechargeable batteries with excellent electrochemical performance", Electrochimica Acta, 116, 512-517. https://doi.org/10.1016/j.electacta.2013.11.077.
  59. Liu, C., Wu, X., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R. and Mohamed, A.M. (2020), "Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns", Steel Compos. Struct., Int. J., 34(5), 743-767. https://doi.org/10.12989/scs.2020.34.5.743.
  60. Liu, Y., Wei, Z., Zhong, B., Wang, H., Xia, L., Zhang, T., Duan, X., Jia, D., Zhou, Y. and Huang, X. (2021), "O-, N-Coordinated single Mn atoms accelerating polysulfides transformation in lithium-sulfur batteries", Energ. Storage Mater., 35, 12-18. https://doi.org/10.1016/j.ensm.2020.11.011.
  61. Lowy, D.A. and Patrut, A. (2008), "Nonobatteries: decreasing size power sources for growing technologies", Recent Patent. Nanotechnol., 2(3), 208-219. https://doi.org/10.2174/187221008786369642.
  62. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., Int. J., 30(3), 271-280. http://doi.org/10.12989/scs.2019.30.3.271.
  63. Majedi, M., Afrazi, M. and Fakhimi, A. (2020), "FEM-BPM simulation of SHPB testing for measurement of rock tensile strength", Proceedings of the 54th US Rock Mechanics/Geomechanics Symposium, American Rock Mechanics Association. https://doi.org/12.2347/25103-35.4.
  64. Majedi, M.R., Afrazi, M. and Fakhimi, A. (2021), "A micromechanical model for simulation of rock failure under high strain rate loading", Int. J. Civ. Eng., 19(5), 501-515. https://doi.org/10.1007/s40999-020-00551-2.
  65. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6.
  66. Mehtab, T., Yasin, G., Arif, M., Shakeel, M., Korai, R.M., Nadeem, M., Muhammad, N. and Lu, X. (2019), "Metal-organic frameworks for energy storage devices: Batteries and supercapacitors", J. Energ. Storage, 21, 632-646. https://doi.org/10.1016/j.est.2018.12.025.
  67. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.-T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  68. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868. http://doi.org/10.12989/sem.2013.46.6.853.
  69. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.
  70. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809. http://doi.org/10.12989/sss.2014.14.5.785.
  71. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014c), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833.
  72. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., Int. J., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  73. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., Int. J., 34(3), 347. http://doi.org/10.12989/scs.2020.34.3.347.
  74. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., Int. J., 27(5), 537-543. http://doi.org/10.12989/scs.2018.27.5.537.
  75. Ngo, Q., Dang, D.N.M. and Tran, K.A. (2018), "Flying Height Optimization for Unmanned Aerial Vehicles in Cellular-Flying Adhoc Network", J. Adv. Eng. Computat., 2(4), 216-223. http://doi.org/10.25073/jaec.201824.210.
  76. Ni, T., Chang, H., Song, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2019a), "Non-intrusive Online Distributed Pulse Shrinking Based Interconnect Testing in 2.5 D IC", IEEE T. Circuit II, 67(11), 2657-2661. https://doi.org/10.1109/TCSII.2019.2962824.
  77. Ni, T., Yao, Y., Chang, H., Lu, L., Liang, H., Yan, A., Huang, Z. and Wen, X. (2019b), "LCHR-TSV: Novel low cost and highly repairable honeycomb-based TSV redundancy architecture for clustered faults", IEEE T. Comput. Aid. D., 39(10), 2938-2951. https://doi.org/10.1109/TCAD.2019.2946243.
  78. Ning, X.H., Liao, C.Z. and Li, G.Q. (2020), "Electrochemical properties of Ca-Pb electrode for calcium-based liquid metal batteries", Int. J. Miner. Metall. Mater., 27(12), 1723-1729. https://doi.org/10.1007/s12613-020-2150-9.
  79. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Darvishnezhad Aliabad, M., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B. and Shariati, A. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., Int. J., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  80. Qi, C. and Fourie, A. (2019), "Cemented paste backfill for mineral tailings management: Review and future perspectives", Mineral. Eng., 144, 106025. https://doi.org/10.1016/j.mineng.2019.106025.
  81. Qi, C., Chen, Q. and Kim, S.S. (2020), "Integrated and intelligent design framework for cemented paste backfill: A combination of robust machine learning modelling and multi-objective optimization", Mineral. Eng., 155, 106422. https://doi.org/10.1016/j.mineng.2020.106422.
  82. Rajaei, S., Shoaei, P., Shariati, M., Ameri, F., Musaeei, H.R., Behforouz, B. and de Brito, J. (2021), "Rubberized alkaliactivated slag mortar reinforced with polypropylene fibres for application in lightweight thermal insulating materials", Constr. Build. Mater., 270, 121430. https://doi.org/10.1016/j.conbuildmat.2020.121430.
  83. Rouhanifar, S. and Afrazi, M. (2019), "Experimental study on mechanical behavior of sand-rubber mixtures", Modares Civil Eng., 19(4), 83-96. https://doi.org/10.4589/62457-246.6
  84. Rouhanifar, S., Afrazi, M., Fakhimi, A. and Yazdani, M. (2020), "Strength and deformation behaviour of sand-rubber mixture", Int. J. Geotech. Eng., 1-15. https://doi.org/10.1080/19386362.2020.1812193.
  85. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.
  86. Safa, M., Maleka, A., Arjomand, M.-A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., Int. J., 19(6), 533. https://doi.org/10.12989/gae.2019.19.6.533.
  87. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  88. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., Int. J., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  89. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  90. Shah, S., Sulong, N.R., Shariati, M. and Jumaat, M. (2015), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", PloS One, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.
  91. Shah, S., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M. (2016a), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021.
  92. Shah, S., Sulong, N.R., Khan, R., Jumaat, M. and Shariati, M. (2016b), "Behavior of industrial steel rack connections", Mech. Syst. Signal Pr. 70, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.
  93. Shahabi, S., Ramli Sulong, N.H., Shariati, M. and Shah, S. (2016), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., Int. J., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185.
  94. Shariati, M. (2008). Assessment of Building Using Nonedestructive Test Techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer), Universiti Putra Malaysia. https://doi.org/10.3245/DF123-234.4.
  95. Shariati, M. (2013). Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya. https://doi.org/10.1453/AS346-345.6.
  96. Shariati, M. (2020), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., Int. J., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  97. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th international conference on Steel Compos. Struct., pp. 21-23. http://doi.org/10.3850/978-981-08-6218-3_CC-Fr031.
  98. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+). https://doi.org/10.1448/812.3457.4587.
  99. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.
  100. Shariati, M., Azar, S.M., Arjomand, M.-A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., Int. J., 19(6), 473-484. https://doi.org/10.12989/gae.2019.19.6.473.
  101. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.-T. and Salih, M.N. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., Int. J., 33(4), 569-581. https://doi.org/10.1016/j.jcsr.2015.04.023.
  102. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019c), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., Int. J., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  103. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019d), "Application of a hybrid artificial neural networkparticle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  104. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and PoiNgian, S. (2019e), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., Int. J., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  105. Shariati, M., Azar, S.M., Arjomand, M.-A., Tehrani, H.S., Daei, M. and Safa, M. (2020a), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., Int. J., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  106. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020b), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., Int. J., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  107. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020c), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., Int. J., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.
  108. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020d), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., Int. J., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183.
  109. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020e), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., Int. J., 34(3), 377-391. http://doi.org/10.12989/scs.2020.34.3.377.
  110. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020f), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886.
  111. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020g), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., Int. J., 35(2), 237-247. http:/.doi.org/10.12989/scs.2020.35.2.237.
  112. Sharma, S., Kim, M.-S., Kim, D. and Yu, J.-S. (2013), "Al nanorod thin films as anode electrode for Li ion rechargeable batteries", Electrochimica Acta, 87, 872-879. https://doi.org/10.1016/j.electacta.2012.09.028.
  113. Shi, M., Wang, B., Shen, Y., Jiang, J., Zhu, W., Su, Y., Narayanasamy, M., Angaiah, S., Yan, C. and Peng, Q. (2020), "3D assembly of MXene-stabilized spinel ZnMn2O4 for highly durable aqueous zinc-ion batteries", Chem. Eng. J., 399, 125627. https://doi.org/10.1016/j.cej.2020.125627.
  114. Si, Q., Hanai, K., Imanishi, N., Kubo, M., Hirano, A., Takeda, Y. and Yamamoto, O. (2009), "Highly reversible carbon-nanosilicon composite anodes for lithium rechargeable batteries", J. Power Sources, 189(1), 761-765. https://doi.org/10.1016/j.jpowsour.2008.08.007.
  115. Srither, S., Selvam, M., Arunmetha, S., Yuvakkumar, R., Saminathan, K. and Rajendran, V. (2013), "Enhancement of discharge capacity of Mg/MnO2 primary cell with Nano-MnO2 as cathode", Sci. Adv. Mater., 5(10), 1372-1376. https://doi.org/10.1166/sam.2013.1598.
  116. Srither, S., Karthik, A., Selvam, M., Saminathan, K., Rajendran, V. and Kaler, K.V. (2014), "Nano-sized MnO2 particles produced by spray pyrolysis for a Zn/MnO2 primary cell: Comparative discharge performance studies with their bulk counterparts", RSC Adv., 4(79), 42129-42136. http://doi.org/10.1039/C4RA05060F.
  117. Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geomech. Eng., Int. J., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.
  118. Sun, Y., Wang, S., Dai, Y. and Lei, X. (2016), "Electrochemical characterization of nano V, Ti doped MnO2 in primary lithium manganese dioxide batteries with high rate", Funct. Mater. Lett., 9(01), 1650005. https://doi.org/10.1142/S1793604716500053.
  119. Tang, K., Mu, X., van Aken, P.A., Yu, Y. and Maier, J. (2013), "Nano-pearl-string" TiNb2O7 as anodes for rechargeable lithium batteries", Adv. Eng. Mater., 3(1), 49-53. https://doi.org/10.1002/aenm.201200396.
  120. Teki, R., Datta, M.K., Krishnan, R., Parker, T.C., Lu, T.M., Kumta, P.N. and Koratkar, N. (2009), "Nanostructured silicon anodes for lithium ion rechargeable batteries", Small, 5(20), 2236-2242. https://doi.org/10.1002/smll.200900382.
  121. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel- concrete composite beam", J. Intell. Manuf., 29(8). http://doi.org/10.1007/s10845-016-1217-y.
  122. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland. http://doi.org/10.15224/978-1-63248-132-0-56.
  123. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  124. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019a), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., Int. J., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  125. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019b), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., Int. J., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415.
  126. Wang, L., Huang, Y., Xie, Y. and Du, Y. (2020), "A new regularization method for dynamic load identification", Sci. Prog., 103(3), 0036850420931283. https://doi.org/10.1177%2F0036850420931283. https://doi.org/10.1177%2F0036850420931283
  127. Wei, J.-H., Gao, X.-T., Tan, S.-P., Wang, F., Zhu, X.-D. and Yin, G.-P. (2017), "Acetylene black loaded on graphene as a cathode material for boosting the discharging performance of Li/SOCl2 battery", Int. J. Electrochem. Sci., 12, 898-905. http://doi.org/10.20964/2017.02.01.
  128. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., Int. J., 27(3), 389-399 http://doi.org/10.12989/scs.2018.27.3.389.
  129. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., Int. J., 30(5), 433-441 https://doi.org/10.12989/scs.2019.30.5.433.
  130. Xing, Z., Ju, Z., Yang, J., Xu, H. and Qian, Y. (2012), "One-step hydrothermal synthesis of ZnFe 2 O 4 nano-octahedrons as a high capacity anode material for Li-ion batteries", Nano Res., 5(7), 477-485. https://doi.org/10.1007/s12274-012-0233-2.
  131. Xu, Z., Li, H., Sun, H., Zhang, Q. and Li, K. (2010), "Carbon nanotubes with phthalocyanine-decorated surface produced by NH3-assisted microwave reaction and their catalytic performance in Li/SOCl2 battery", Chinese J. Chem., 28(10), 2059-2066. https://doi.org/10.1002/cjoc.201090344.
  132. Yan, X., Huang, X., Chen, Y., Liu, Y., Xia, L., Zhang, T., Lin, H., Jia, D., Zhong, B. and Wen, G. (2021), "A theoretical strategy of pure carbon materials for lightweight and excellent absorption performance", Carbon, 174, 662-672. https://doi.org/10.1016/j.carbon.2020.11.044.
  133. Yang, C., Gao, F. and Dong, M. (2020a), "Energy efficiency modeling of integrated energy system in coastal areas", J. Coastal Res., 103(SI), 995-1001. https://doi.org/10.2112/SI103-207.1.
  134. Yang, Y., Chen, H., Zou, X., Shi, X.-L., Liu, W.-D., Feng, L., Suo, G., Hou, X., Ye, X. and Zhang, L. (2020b), "Flexible carbon-fiber/semimetal Bi nanosheet arrays as separable and recyclable plasmonic photocatalysts and photoelectrocatalysts", ACS Appl. Mater. Interf., 12(22), 24845-24854. https://doi.org/10.1021/acsami.0c05695.
  135. Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M.T. and Song, H. (2020), "Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries", Energy Storage Mater., 25, 644-678. https://doi.org/10.1016/j.ensm.2019.09.020.
  136. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Clean. Prod., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.
  137. Yoo, J.-K., Kim, J., Lee, H., Choi, J., Choi, M.-J., Sim, D.M., Jung, Y.S. and Kang, K. (2013), "Porous silicon nanowires for lithium rechargeable batteries", Nanotechnology, 24(42), 424008. https://doi.org/10.1088/0957-4484/24/42/424008.
  138. Yu, D., Mao, Y., Gu, B., Nojavan, S., Jermsittiparsert, K. and Nasseri, M. (2020), "A new LQG optimal control strategy applied on a hybrid wind turbine/solid oxide fuel cell/in the presence of the interval uncertainties", Sustain. Energ. Grid. Network., 21, 100296. https://doi.org/10.1016/j.segan.2019.100296.
  139. Zhang, J., Chen, Q., Sun, J., Tian, L. and Zuo, C. (2020a), "On a universal solution to the transport-of-intensity equation", Opt. Lett., 45(13), 3649-3652. https://doi.org/10.1364/OL.391823.
  140. Zhang, J., Sun, J., Chen, Q. and Zuo, C. (2020b), "Resolution analysis in a lens-free on-chip digital holographic microscope", IEEE T. Comput., 6, 697-710. https://doi.org/10.1109/TCI.2020.2964247.
  141. Zhang, Y., Liu, G., Zhang, C., Chi, Q., Zhang, T., Feng, Y., Zhu, K., Zhang, Y., Chen, Q. and Cao, D. (2020c), "Low-cost MgFexMn2-xO4 cathode materials for high-performance aqueous rechargeable magnesium-ion batteries", Chem. Eng. J., 392, 123652. https://doi.org/10.1016/j.cej.2019.123652.
  142. Zhang, J., Wang, M., Tang, Y., Ding, Q., Wang, C., Huang, X., Chen, D. and Yan, F. (2021), "Angular velocity measurement with improved scale factor based on a wideband-tunable optoelectronic oscillator", IEEE T. Instrum. Meas., 70, 1-9. https://doi.org/10.1109/TIM.2021.3067183.
  143. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., Int. J., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.
  144. Zuo, C., Chen, Q., Tian, L., Waller, L. and Asundi, A. (2015), "Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective", Opt. Laser. Eng., 71, 20-32. https://doi.org/10.1016/j.optlaseng.2015.03.006.
  145. Zuo, C., Sun, J., Li, J., Zhang, J., Asundi, A. and Chen, Q. (2017), "High-resolution transport-of-intensity quantitative phase microscopy with annular illumination", Sci. Report., 7(1), 1-22. https://doi.org/10.1038/s41598-017-06837-1.
  146. Zuo, X., Dong, M., Gao, F. and Tian, S. (2020), "The modeling of the electric heating and cooling system of the integrated energy system in the coastal area", J. Coastal Res., 103(SI), 1022-1029. https://doi.org/10.2112/SI103-213.1.