과제정보
The present study is part of the Ph.D thesis prepared by the first author. The scholarship provided by the Islamic Bank of Development for the UNTIRTA project "food security" is duly acknowledged.
참고문헌
- ACI Code 318M-14 (2015), Building Code Requirements for Structural Concrete, American Concrete Institute.
- Ahmed, F.R., Hamad, K.K. and Rashied, Z.N. (2017), "Prediction of punching strength of reinforced concrete footings by finite element method", Am. J. Civil Eng. Arch., 5(1), 8-16. https://doi.org/10.12691/AJCEA5-1-2.
- Al-Aghbari, M.Y. (2007), "Settlement of shallow circular foundations with structural skirts resting on sand", J. Eng. Res., 4(1), 11-16. https://doi.org/10.24200/tjer.vol4iss1pp11-16.
- Bartolac, M., Damjanovic, D. and Duvnjak, I. (2015), "Punching strength of flat slabs with and without shear reinforcement", Gradjevinar, 67(8), 771-786. https://doi.org/10.14256/JCE.1361.2015.
- Bathe, K.J. (2016), Finite Element Procedures, Prentice Hall, Pearson Education, Inc.
- Batoz, J.L. and Dhatt, G. (1990), Modelisation des Structures par Element Finis, Volume 1 : Solides Elastiques, Hermes Science Publication/Lavoisier, France.
- Batoz, J.L. and Dhatt, G. (1990), Modelisation des Structures par Elements Finis, Volume 2 : Poutres et Plaques, Hermes Science Publications/Lavoisier, France.
- Darjanto, H. (2015), "Load transfer mechanisms in the cell spider net system footing construction through full-scale static and cyclical vertical loads and 3d numerical analysis", Ph.D. Dissertation, Diponegoro University, Semarang, Indonesia.
- Darjanto, H., Irsyam, M. and Retno, S.R. (2015), "Full scale load test on the spider net system", Jurnal Teknologi (Sciences & Engineering). Universiti Teknologi Malaysia, 77(11), 73-82.
- El Sawwaf, M., Nazir, A., Azzam, W. and Mohy, A. (2017), "Utilization of embedded ribs for improving the bearing capacity of raft foundation in sand", International Conference on Advances in Structural and Geotechnical Engineering, Hurghada, Egypt, April.
- Eurocode 2, (2004), Design of Concrete Structure, Eurocode Standards.
- Fillo, L., Augustin, T., Knapcova, V. and Labudkova, J. (2016), "Influence of footings stiffness on punching resistance", Perspect. Sci., 7, 204-207. https://doi.org/10.1016/j.pisc.2015.11.034.
- https://www.autodesk.com/
- https://www.katama.co.id/
- Hegger, J., Ricker, M., Ulke, B. and Ziegler, M. (2007), "Investigations on the punching behaviour of reinforced concrete footings", Eng. Struct., 29(9), 2233-2241. https://doi.org/10.1016/j.engstruct.2006.11.012.
- Ibrahimbegovic, A. (2009), Nonlinear Solid Mechanics: Theoretical Formulations and Finite Element Solution Methods, Springer, Berlin.
- Paz, M. (1985), Structural Dynamics: Theory and Computation, 2nd Edition, Springer, New York.
- Ponginan, R. (2018), Learn Dynamic Analysis with Altair OptiStruct, 2nd Edition, Altair University.
- Soelarso, S., Antaluca, E., Batoz, J.L. and Lamarque, F. (2019), "On the finite element bearing capacity analysis of a rib system to be used as shallow foundation construction", Best Conference Proceedings, Bali, August.
- Soelarso, S., Antaluca, E., Batoz, J.L. and Lamarque, F. (2019), "On the finite element modeling and bearing capacity of two shallow foundation systems", Universite de Technologie de Compiegne, Internal Research Report.