Structural Engineering and Mechanics

  • 제78권6호
  • /
  • Pages.731-737
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Edge-clamped two-way slabs containing low-ductility steel

  • Sakka, Zafer (Energy and Building Research Center, KISR) ;
  • Gilber, R. Ian (School of Civil and Environmental Engineering. UNSW)
  • 투고 : 2020.12.31
  • 심사 : 2021.04.06
  • 발행 : 2021.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes a series of full range load tests on two-way, edge-clamped reinforced concrete slab panels containing either Class L WWF or Class N deformed bars. Five rectangular slab panels were tested each with two adjacent fully restrained edges and two free edges. A point support was included under the corner of each panel at the intersection of the two free edges. Each slab specimen was loaded by four transverse loads applied symmetrically in the mid-panel region by a deformation-controlled actuator in a stiff testing frame. The continuous edge supports were provided by clamping two adjacent edges in a carefully designed and constructed testing frame. The slabs were instrumented with load cells to measure applied forces and reactions, strain gauges to measure strain in the steel reinforcement and on the concrete surfaces, linear variable displacement transducers and lasers to measure deflections at all stages of loading. The results of the tests are presented and evaluated, with particular emphasis on the strength, ductility and failure mode of the slabs.

키워드

과제정보

This study was funded by the Australian Research Council through an ARC Discovery project (DP0558370) and an Australian Professional Fellowship awarded to the second author. The support of the Australian Research Council is gratefully acknowledged.

참고문헌

  1. AS 3600 (2009), Concrete Structures, Standards Australia, Sydney, Australia.
  2. Bank, L.C. (2013), "Progressive failure and ductility of FRP composites for construction: Review", J. Compos. Constr., 17(3), 406-419. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000355.
  3. Dancygier, A.N. and Berkover, E. (2016), "Cracking localization and reduced ductility in fiber-reinforced concrete beams with low reinforcement ratios", Eng. Struct., 111, 411-424. https://doi.org/10.1016/j.engstruct.2015.11.046.
  4. Foster, S.J. and Kilpatrick, A.E. (2008), "The use of low ductility welded wire mesh in the design of suspended reinforced concrete slabs", Austr. J. Struct. Eng., 8(3), 237-248. https://doi.org/10.1080/13287982.2008.11465001.
  5. Gilbert, R.I. (2005), "Strain localization and ductility of reinforced concrete slabs", Proceedings of the Australian Structural Engineering Conference, Newcastle, Australia, September.
  6. Gilbert, R.I. and Sakka, Z.I. (2007), "Effect of reinforcement type on the ductility of suspended reinforced concrete slabs", J. Struct. Eng., 133(6), 834-843. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:6(834).
  7. Gilbert, R.I. and Sakka, Z.I. (2009), "Effect of support settlement on the strength and ductility of reinforced concrete one-way slabs containing class L reinforcement", Concrete 09 - Advances and Trends in Structural Engineering, Mechanics and Computation, Sydney, Australia, September.
  8. Gilbert, R.I. and Sakka, Z.I. (2010), "Strength and ductility of reinforced concrete slabs containing welded wire fabric and subjected to support settlement", Eng. Struct., 32(6), 1509-1521. https://doi.org/10.1016/j.engstruct.2010.01.025.
  9. Gilbert, R.I. and Smith, S.T. (2006), "Strain localization and its impact on the ductility of reinforced concrete slabs containing welded wire reinforcement", J. Adv. Struct. Eng., 9(1), 117-127. https://doi.org/10.1260/136943306776232837.
  10. Gilbert, R.I., Sakka, Z.I. and Curry, M. (2006), "Moment redistribution in reinforced concrete slabs containing welded wire fabric", Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, Bangkok, Thailand, August.
  11. Gilbert, R.I., Sakka, Z.I. and Curry, M. (2007), "The ductility of suspended reinforced concrete slabs containing Class L welded wire fabric", Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials, Christchurch, New Zealand, November.
  12. Goldsworthy, H., Siddique, U. and Gravina, R. (2009), "Support settlement and slabs reinforced with low-ductility steel", ACI Struct. J., 106(6), 840-847.
  13. Ho, J.C.M., Au, F.T.K. and Kwan, A.K.H. (2005), "Effects of strain hardening of steel reinforcement on flexural strength and ductility of concrete beams", Struct. Eng. Mech., 19(2), 185-198. http://doi.org/10.12989/sem.2005.19.2.185.
  14. Ma, C., Awang, A.Z. and Omar, W. (2016), "Flexural ductility design of confined high-strength concrete columns: Theoretical modelling", Measure., 78, 42-48. https://doi.org/10.1016/j.measurement.2015.09.039.
  15. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. http://doi.org/10.12989/sem.2013.48.6.833.
  16. Mousa, M.I. (2015), "Flexural behaviour and ductility of high strength concrete (HSC) beams with tension lap splice", Alexandr. Eng. J., 54(3), 551-563. https://doi.org/10.1016/j.aej.2015.03.032.
  17. Munter, S. and Patrick, M. (2012a), "SRIA's class L mesh elevated slab tests: Part 1A-objectives, design & details", Proceedings of the Australian Structural Engineering Conference, Perth, Australia, July.
  18. Munter, S. and Patrick, M. (2012b), "SRIA's class L mesh elevated slab tests: Part 1B-observations and results", Proceedings of the Australasian Structural Engineering Conference, Perth, Australia, July.
  19. Park, H. and Cho, J. (2017), "Ductility analysis of prestressed concrete members with high-strength strands and code implications", Struct. J., 114(2), 407-416.
  20. Sakka, Z.I. and Gilbert, R.I. (2017), "Structural behavior of twoway slabs reinforced with low-ductility WWF", J. Struct. Eng., 143(12), 04017166. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001902.
  21. Sakka, Z.I. and Gilbert, R.I. (2018), "Numerical investigation on the structural behavior of two-way slabs reinforced with low ductility steel", Struct. Eng. Mech., 65(3), 223-231. http://doi.org/10.12989/sem.2018.65.3.223.
  22. Tuladhar, R. and Lancini, B.J. (2014), "Ductility of concrete slabs reinforced with low-ductility welded wire fabric and steel fibers", Struct. Eng. Mech., 49(4), 449-461. http://doi.org/10.12989/sem.2014.49.4.449.
  23. Wang, H. and Belarbi, A. (2011), "Ductility characteristics of fiber-reinforced-concrete beams reinforced with FRP rebars", Constr. Build. Mater., 25(5), 2391-2401. https://doi.org/10.1016/j.conbuildmat.2010.11.040.
  24. Warner, R.F., Rangan, B.V., Hall, A.S. and Faulkes, K.A. (1998), Concrete Structures, Longman, Australia.