Structural Monitoring and Maintenance

  • 제8권2호
  • /
  • Pages.203-220
  • /
  • 2021
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Temperature monitoring and analysis of a long-span cable-stayed bridge during construction period

  • Mei, Xiudao (School of Civil Engineering, Wuhan University) ;
  • Lu, Yiyan (School of Civil Engineering, Wuhan University) ;
  • Shi, Jing (Department of Bridge Health Monitoring, State Key Laborary for Health and Safety of Bridge Structures)
  • 투고 : 2021.03.11
  • 심사 : 2021.05.07
  • 발행 : 2021.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The temperature induced response of long-span cable-stayed bridge in cantilever state is significant, which is of great interest to study the temperature characteristics during construction period. A method of analyzing the eigenvalue and its extremum of daily temperature based on cubic spline function (CSF) is proposed. By setting the fixed time interval reasonably, introducing variable time interval and extracting nodes at the MinMax of daily temperature, the obtained CSF can approach the measured temperature curve with high accuracy. Based on CSF, the temperature characteristics at three levels of measuring point, section and component are analyzed in turn. The temperature monitoring data of a cable-stayed bridge with main span of 938 m and side span of steel-concrete composited box girder (CBG) during construction are analyzed. The results show that the temperature variation of steel box girder is remarkable; the steel beam of CBG is similar to steel box girder before composited, and it turns stable after composited; the influence of PE color on cable temperature is notable than that of the cable specification; as blue PE cable, the temperature difference of cable vs pylon and cable vs CBG exceed 17℃ and 13℃.

키워드

과제정보

The research described in this paper was financially supported by the Special Major Project of Technological Innovation of Hubei Province (2018AAA066) and the 2017 Sci-Tech Development Plan of China Railway Group Limited (2017-Key Project-37-01).

참고문헌

  1. Abid, S.R., Mussa, F., Taysi, N. and Ozakca, M. (2018), "Experimental and finite element investigation of temperature distributions in concrete-encased steel girders", Struct. Control Health Monitor., 25(1), e2042. https://doi.org/10.1002/stc.2042
  2. Celik, O., Terrell, T., Gul, M. and Catbas, F.N. (2018), "Sensor clustering technique for practical structural monitoring and maintenance", Struct. Monitor. Maint., Int. J., 5(2), 273-295. https://doi.org/10.12989/smm.2018.5.2.273
  3. Farrar, C.R. and Worden, K. (2013), Structural Health Monitoring: A Machine Learning Perspective, A John Wiley and Sons, Ltd., Publication, Chichester, West Sussex, UK.
  4. Guo, J., Zhong, J., Dang, X. and Yuan, W. (2016), "Seismic responses of a cable-stayed bridge with consideration of uniform temperature load", Appl. Sci.-Basel, 6(12), 408. https://doi.org/10.3390/app6120408.
  5. Hall, D.L. and McMullen, S.A. (2004), Mathematical Techniques In Multisensor Data Fusion (Second Edition), Artech House, London, England, UK.
  6. Han, Q., Ma, Q., Xu, J. and Liu, M. (2021), "Structural health monitoring research under varying temperature condition: A review", J. Civil Struct. Health Monitor., 11(1), 149-173. https://doi.org/10.1007/s13349-020-00444-x.
  7. Harms, T., Sedigh, S. and Bastianini, F. (2010), "Structural health monitoring of bridges using wireless sensor networks", IEEE Instrumentation and Measurement Magazine, 13(6), 14-18. https://doi.org/10.1109/MIM.2010.5669608
  8. Hu, H.Y., Xu, G.Y. and Zhang, Y.F. (2018), "Key techniques for design of main girder of main bridge of wuhan qingshan changjiang river highway bridge", Bridge Constr., 48(5), 81-85.
  9. Huang, H.B., Yi, T.H., Li, H.N. and Liu, H. (2018), "New representative temperature for performance alarming of bridge expansion joints through temperature-displacement relationship", J. Bridge Eng., 23(7), 04018043. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001258
  10. Kelbek (1981), Influence of Solar Radiation On Bridge Structure, China Railway Publishing House, Beijing, China.
  11. Khaleghi, B., Khamis, A., Karray, F.O. and Razavi, S.N. (2013), "Multisensor data fusion: A review of the state-of-the-art", Inform. Fusion, 14(1), 28-44. https://doi.org/10.1016/j.inffus.2011.08.001
  12. Kim, H.J. (2017), "Analysis of variation rate of displacement to temperature of service stage Cable-Stayed bridge using temperatures and displacement data", In: Caicedo J., Pakzad S. (eds), Dynamics of Civil Structures, Volume 2. Conference Proceedings of the Society for Experimental Mechanics Series. https://doi.org/10.1007/978-3-319-54777-0_3
  13. Lee, S.H., Shin, H.K., Kim, K.N. and Jung, K.S. (2016), "An experimental study for estimation of effective temperature for design in steel box girder bridge", J. Korean Soc. Steel Constr., 28(6), 449-458. https://doi.org/10.7781/KJOSS.2016.28.6.449
  14. Liu, J., Liu, Y., Jiang, L. and Zhang, N. (2019), "Long-term field test of temperature gradients on the composite girder of a long-span cable-stayed bridge", Adv. Struct. Eng., 22(13), 2785-2798. https://doi.org/10.1177/1369433219851300
  15. Liu, H., Ding, Y.L., Zhao, H.W., Wang, M.Y. and Geng, F.F. (2020), "Deep learning-based recovery method for missing structural temperature data using LSTM network", Struct. Monitor. Maint., Int. J., 7(2), 109-124. https://doi.org/10.12989/smm.2020.7.2.109
  16. Maleki, S. and Maghsoudi-Barmi, A. (2016), "Effects of concurrent earthquake and temperature loadings on cable-Stayed bridges", Int. J. Struct. Stabil. Dyn., 16(06), 155002. https://doi.org/10.1142/S0219455415500200
  17. Ministry of Transport of the People's Republic of China (2020), Specifications for Design of Highway Cable-stayed Bridge, JTG/T 3365-01-2020; Beijing, China.
  18. Montassar, S., Mekki, O.B. and Vairo, G. (2015), "On the effects of uniform temperature variations on stay cables", J. Civil Struct. Health Monitor., 5(5), 735-742. https://doi.org/10.1007/s13349-015-0140-9
  19. Roberts, G.W., Brown, C.J. and Tang, X. (2017), "Correlated GNSS and temperature measurements at 10-minute intervals on the Severn Suspension Bridge", Appl. Geomat., 9(2), 115-124. https://doi.org/10.1007/s12518-017-0187-x
  20. Tome, S.E., Pimentel, M. and Figueiras, J. (2018), "Structural response of a concrete cable-stayed bridge under thermal loads", Eng. Struct., 176(C), 652-672. https://doi.org/10.1016/j.engstruct.2018.09.029
  21. Wang, Z.C., Zha, G.P., Ren, W.X., Hu, K. and Yang, H. (2018), "Nonlinear boundary parameter identification of bridges based on temperature-induced strains", Struct. Eng. Mech., Int. J., 68(5), 563-573. https://doi.org/10.12989/sem.2018.68.5.563
  22. Xia, Q., Zhou, L.M. and Zhang, J. (2018), "Thermal performance analysis of a long-span suspension bridge with long-term monitoring data", J. Civil Struct. Health Monitor., 8(4), 543-553. https://doi.org/10.1007/s13349-018-0299-y
  23. Xu, Y.L., Chen, B., Ng, C.L., Wong, K.Y. and Chan, W.Y. (2010), "Monitoring temperature effect on a long suspension bridge", Struct. Control Health Monitor., 17(6), 632-653. https://doi.org/10.1002/stc.340
  24. Xu, X., Xu, Y.L., Ren, Y. and Huang, Q. (2021), "Site-specific extreme load estimation of a long-span cable-stayed bridge", J. Bridge Eng., 26(4), 05021001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001700
  25. Yang, J.H., Im, D.K., Kim, C.H., Ahn, S.S. and Lee, W.S. (2012), "Construction and geometry control of Incheon cable-stayed bridge", Struct. Eng. Int., 22(1), 49-52. https://doi.org/10.2749/101686612X13216060213310
  26. Yang, S., Liu, B., Li, Y. and Zhang, M. (2019), "Effects of environmental temperature and age on the elastic modulus of concrete", Struct. Eng. Mech., Int. J., 72(6), 737-746. https://doi.org/10.12989/sem.2019.72.6.737
  27. Zhou, H.F., Ni, Y.Q. and Ko, J.M. (2010), "Constructing input to neural networks for modeling temperature-caused modal variability: Mean temperatures, effective temperatures, and principal components of temperatures", Eng. Struct., 32(6), 1747-1759. https://doi.org/10.1016/j.engstruct.2010.02.026
  28. Zhou, L., Chen, L., Xia, Y. and Koo, K.Y. (2020), "Temperature-induced structural static responses of a long-span steel box girder suspension bridge", J. Zhejiang University-Science A, 21(7), 580-592. https://doi.org/10.1631/jzus.A1900490
  29. Zienkiewicz, O.C., Taylor, R.L. and Zhu, J.Z. (2008), The Finite Element Method: Its Basis and Fundamentals, (6th edition), Elsevier (Singapore) Pte Ltd, Singapore.