DOI QR코드

DOI QR Code

Optimization and application of a gel polymer electrolyte in solid state super capacitors with graphite electrodes

  • Gunasekara, Buddhika P. (Department of Physics, University of Jaffna) ;
  • Perera, Kumudu S. (Department of Electronics, Wayamba University of Sri Lanka) ;
  • Vidanapathirana, Kamal P. (Department of Electronics, Wayamba University of Sri Lanka) ;
  • Vignarooban, K. (Department of Physics, University of Jaffna)
  • 투고 : 2020.02.01
  • 심사 : 2021.03.27
  • 발행 : 2021.06.25

초록

The prime objective of the present study is to exploit a user friendly, inexpensive all solid state super capacitor using a suitable electrolyte and electrodes. A gel polymer electrolyte (GPE) consisted with polyvinylidene fluoride-co-hexafluopropylene (PVdF), ethylene carbonate (EC), propylene carbonate (PC) and zinc trifluoromethane sulfonate (Zn(CF3SO3)2-ZnTF) was prepared using solvent casting method and its properties were optimized by varying the composition. The composition of 16 PVdF : 22 ZnTF : 31 EC : 31 PC (weight %) exhibits the optimum room temperature conductivity of 3.09×10-3 Scm-1. It is purely an ionic conductor having a negligible electronic conductivity. In addition, it was possible to obtain a thin, mechanically stable film. The electrodes were prepared using Sri Lankan natural graphite (NG) with a polymer binder. Eventhough there are reports about natural graphite based super capacitors, Sri Lankan natural graphite has not been considered for super capacitors at a large scale. The main reason for turning towards natural graphite is to reap the benefits of low cost as well as the safety. In order to optimize the electrode properties, the ratio between graphite and polymer binder (in weight basis) was changed. The polymer binder used was polytetrafluoroethylene (PTFE). Super capacitor fabricated with the electrode of the composition, NG : PTFE = 90:10 shows the maximum single electrode specific capacitance (2.58 Fg-1). The fabricated device retains for continuous charge discharge operation with a minimum performance reduction.

키워드

과제정보

Financial assistance received from Wayamba University of Sri Lanka under the research grant, SRHDC/RP/04/17/01 is highly acknowledged.

참고문헌

  1. Aravindan, V., Karthikaselvi, G., Vickraman, P. and Naganandhini, S.P. (2009), "Polyvinylidene fluoride baed novel polymer electrolytes for magnesium rechargeable batteries with Mg(CF3SO3)2", J. Appl. Polym. Sci., 112, 3024-3029. https://doi.org/10.1002/app.29877
  2. Aval, L.F., Ghoranneviss, M. and Pour, G.B. (2018), "Graphite nano particle paper super capacitor based on gel electrolyte", Mater. Renew. Sustain. Energy, 7(4), 29-40. https://doi.org/10.1007/s40243-018-0136-6
  3. Chen, W., Rakhi, R.B., Hu, L., Xie, X., Cui, Y. and Alshareef, H.N. (2011), "High performance nano structured super capacitors on a sponge", Nano. Lett., 11(12), 5165-5172. https://doi.org/10.1021/nl2023433
  4. Das, S. and Ghosh, A. (2017), "Solid polymer electrolyte based on PVdF-HFP and ionic liquid embedded with TiO2 nano particle for electric double layer capacitor application", J. Electrochem. Soc., 164(13), F1348-F1353. https://doi.org/10.1149/2.0561713jes
  5. Jang, Y., Jo, J., Choi, Y.M., Kim, I., Lee, S.H., Kim, D. and Yoon, S.M. (2013), "Activated carbon nano composite electrodes for high performance super capacitors", Electrochim. Acta., 102, 240-245. https://doi.org/10.1016/j.electacta.2013.04.020
  6. Kim, B.K., Sy, S., Yu, A. and Zhang, J. (2015), Handbook of Clean Energy Systems, John Wiley and Sons Ltd.
  7. Pal, P. and Ghosh, A. (2018), "Highly efficient gel polymer electrolytes for all solid state electrochemical charge storage devices", Electrochim. Acta, 278, 137-148. https://doi.org/10.1016/j.electacta.2018.05.025
  8. Pandey, K., Dwivedi, M.M., Asthana, N., Singh, M. and Agrawal, S.L. (2011), "Structural and ion transport studies in (100-x)PVdF+xNH4SCN gel electrolyte", Mater. Sci. Appl., 2(7), 721-728. https://doi.org/10.4236/msa.2011.27100
  9. Prabaharan, S.R.S., Vimala, R. and Zainal, Z. (2006), "Nanostructured meso porous carbon acelectrodes for super capacitors", J. Power Sources, 161, 730-736. https://doi.org/10.1016/j.jpowsour.2006.03.074
  10. Priya, W.L.M. and Suthanthiraraj, S.A. (2013), "Preparation and characterization of polymer electrolytes containing poly(vinylidenefluoride-co-hexafluoropropylene) and zinc trifluoromethanesulfonate", Che. Sci. Trans., 2(4), 1232-1237.
  11. Rajendran, S., Mahendran, O. and Kannan, R. (2001), "Characterization of [(1-x)PMMA-xPVdF] polymer blend electrolyte with Li+ ion", Fuel, 81, 1077-1081. https://doi.org/10.1016/S0016-2361(01)00178-8
  12. Ranade, A.P., Jung, D.Y., Sammakia, B.G., Eilertsen, T. and Davis, T. (2011), "Optimization study of super capacitor electrode material composition and thickness for enhanced performance of the super capacitor", Nano Science and Technology Institute, 1, 730-733.
  13. Sharma, J. and Hashmi, S. (2018), "Magnesium ion conducting gel polymer electrolyte nanocomposites : effect of active and passive nanofillers", Polym. Composites., 40(4), 1295-1306. https://doi.org/10.1002/pc.24853
  14. Sheha, E. (2013), "Prototype system for Mg/TiO2 anatase batteries", Int. J. Electrochem. Sci., 8, 3653-3663.
  15. Song, M.K., Kim, Y.T., Kim, Y.T., Cho, B.W., Popov, B.N. and Rhee, H.W. (2003), "Thermally stable gel polymer electrolytes", J. Electrochem. Soc., 150(4), A439-A444. https://doi.org/10.1149/1.1556592
  16. Subramanian, V., Luo, C., Stephan, A.M., Nahm, K.S., Thomas, S. and Wei, B. (2007), "Super capacitors from activated carbon derived from banana fibers", J. Phys. Chem., 111, 7527-7531. https://doi.org/10.1021/jp067009t
  17. Tey, J.P., Careem, M.A., Yarmo, M.A. and Arof, A.K. (2016), "Durian shell based activated carbon electrode for EDLCs", Ionics, 22/7, 1209-1217. https://doi.org/10.1007/s11581-016-1640-2
  18. Tripathi, S.K., Gupta, A., Jain, A. and Kumari, M. (2013), "Electrochemical studies on nanocomposite polymer electrolytes", Indian J. Pure Appl. Phys., 51, 358-361.
  19. Wang, Y., Cao, J., Zhou, Y., Ouyang, J.H., Jia, D. and Guo, L. (2012), "Ball milled graphite as an electrode material for high voltage super capacitor in neutral aqueous electrolyte", J. Electrochem. Soc., 159(5), A579-A583. https://doi.org/10.1149/2.071205jes
  20. Winter, M. and Brodd, R.J. (2004), "What are batteries, fuel cells and super capacitors", Chem. Rev., 104, 4245-4269. https://doi.org/10.1021/cr020730k
  21. Zhu, Z., Tang, S., Yuan, J., Qin, X., Deng, Y., Qu, R. and Haarberg, G.M. (2016), "Effects of various binders on supercapacitor performances", Int. J. Electrochem. Sci., 11, 8270-8279. https://doi.org/10.20964/2016.10.04