Advances in materials Research

  • 제10권1호
  • /
  • Pages.67-76
  • /
  • 2021
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of physical properties of samples on the mechanical characteristics of high-density polyethylene (HDPE)

  • 투고 : 2020.02.03
  • 심사 : 2021.02.20
  • 발행 : 2021.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study aimed an experimental data about the effect of physical properties of samples on the mechanical characteristics of high-density polyethylene (HDPE) used for the manufacture of preinsulated pipes for heating networks. The main waterproofing insulation material in the construction of preinsulated pipelines for heating networks is polyethylene. Outer outer casing of preinsulated pipes made of high density polyethylene (HDPE) are used as a waterproofing insulation of polyurethane foam of steel pipes manufactured in the factory. The sufficient resistances to cracking and mechanical stress, resistance to ultraviolet radiation, high density, high strength, low aging are main properties of HDPE. The study of HDPE of different manufacturers is relevant because of the aging of preinsulated pipelines with HDPE outer casing. In this study are tested physical characteristics of HDPE as a melt flow rate, density at 23℃, water content of PE80, PE100 pipe polyethylene of different world manufacturers. The best samples of HDPE and the effects of various aging factors on the properties of polyethylene are presented.

키워드

참고문헌

  1. ASTM D1238 (2013), Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer, Copyright by ASTM Int'l (all rights reserved); Fri Feb 14 10:09:04 EST 2014.
  2. ASTM D1505 (2018), Standard Test Method for Density of Plastics by the Density-Gradient Technique, 1 Apr. 2018
  3. Bazhanova, M.E. and Erofeev, V.T. (2012), "The resistance of pipeline materials under the influence of soil microorganisms", Bulletin of BSTU. V.G. Shukhov, 1, 31-33. [In Russian]
  4. Chopra, K., Tyagi, V.V., Pandey, A.K. and Sari, A. (2018), "Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications", Appl. Energy, 228, 351-389. http://doi.org/10.1016/J.APENERGY.2018.06.067
  5. anielewicz, J., Sniechowska, B., Sayegh, M.A., Fidorow, N. and Jouhara, H. (2016), "Three-dimensional numerical model of heat losses from district heating network pre-insulated pipes buried in the ground", Energy, 108, 172-184. http://doi.org/10.1016/J.ENERGY.2015.07.012
  6. Deveci, S. and Fang, D. (2017), "Correlation of molecular parameters, strain hardening modulus and cyclic fatigue test performances of polyethylene materials for pressure pipe applications", Polym. Testing, 62, 246-253. http://doi.org/10.1016/J.POLYMERTESTING.2017.07.007
  7. DIN EN 253-2013 (2013), District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene.
  8. DIN EN 448-2009 (2009), District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.
  9. Doyle, L., Weidlich, I. and Illguth, M. (2019), "Anisotropy in Polyurethane Pre-Insulated Pipes", Polym., 11(12), p. 2074. http://doi.org/10.3390/polym11122074
  10. EN 12118-2013 (2013), Plastics piping systems - determination of moisture content in thermoplastics by coulometry.
  11. EN DIN 8075 (2013), Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing.
  12. He, X., Zha, X., Zhu, X., Qi, X. and Liu, B. (2018), "Effect of short chain branches distribution on fracture behavior of polyethylene pipe resins", Polym. Testing, 68, 219-228. http://doi.org/10.1016/J.POLYMERTESTING.2018.04.017
  13. Huang, X., Alva, G., Liu, L. and Fang, G. (2017), "Microstructure and thermal properties of cetyl alcohol/high density polyethylene composite phase change materials with carbon fiber as shape-stabilized thermal storage materials", Appl. Energy, 200, 19-27. http://doi.org/10.1016/J.APENERGY.2017.05.074
  14. Kalmagambetova, A.Sh. and Bogoyavlenskaya, T.A. (2020), "The influence of adhesion of different materials on the properties of preinsulated pipes", Euroheat and Power (English Edition), 2020(3), pp. 32-37.
  15. Kayfeci, M. (2014), "Determination of energy saving and optimum insulation thicknesses of the heating piping systems for different insulation materials", Energy Build., 69, 278-284. http://doi.org/10.1016/J.ENBUILD.2013.11.017
  16. Kimelblat, V.I., Volkov, I.V. and Zhukov, A.V. (2015), "Technological features of butt-welding of pipes of different grades of polyethylene", Territory Neftegaz, 4, 84-89. [In Russian]
  17. Nezbedova, E., Pinter, G., Frank, A., Hutar, P., Poduska, J. and Hodan, J. (2017), "Accelerated Tests for Lifetime Prediction of PE-HD Pipe Grades", Macromolecular Symposia, 373(1), 1600096. http://doi.org/10.1002/masy.201600096.
  18. Prishchepa, D., Ivanov, A., Ioffe, A., Katsevman, M. and Kalugina, E. (2014), "Lightfastness of polyethylene pipe grades", Polym. Tubes, 2(44), 56-60. [In Russian]
  19. Sadr-Al-Sadati, S.A. and Ghazizadeh, M.J. (2019), "The experimental and numerical study of water leakage from High-Density Polyethylene pipes at elevated temperatures", Polym. Testing, 74, 274-280. http://doi.org/10.1016/J.POLYMERTESTING.2019.01.014
  20. Soltaninezhad, S., Goharrizi, A.S. and Salavati, H. (2020), "Investigation the fracture behavior of high-density polyethylene PE80 weakened by inclined U-notch with end hole", Struct. Eng. Mech., Int. J., 74(5), 601-609. http://doi.org/10.12989/sem.2020.74.5.601
  21. Technical Datasheet Formosa Plastic Corporation (2010), Taisox 8001 BL-Black. Jan. 2 2010.
  22. Torres-Huerta, A.M., Dominguez-Crespo, M.A., Palma-Ramirez, D., Flores-Vela, A.I., Castellanos-Alvarez, E. and Del Angel-Lopez, D. (2019), "Preparation and degradation study of HDPE/PLA polymer blends for packaging applications", Rev. Mex. Ing. Quimica, 18, 251-271. https://doi.org/10.24275/uam/izt/dcbi/revmexingquim/2019v18n1/Torres
  23. Turski, M. and Sekret, R. (2018), "Buildings and a district heating network as thermal energy storages in the district heating system", Energy Build., 179, 49-56. http://doi.org/10.1016/J.ENBUILD.2018.09.015
  24. Volkov, I.V., Bitt, V.V., Kalugina, E.V., Kryuchkov, A.N. and Kimelblat, V.I. (2014), "Rheology of polyethylenes and pipe extrusion", Polym. Tubes, 4(46), 46-50. [In Russian]
  25. Wang, H., Meng, H. and Zhu, T. (2018), "New model for onsite heat loss state estimation of general district heating network with hourly measurements", Energy Convers. Manage., 157, 71-85. http://doi.org/10.1016/J.ENCONMAN.2017.11.062
  26. Zanasi, T., Fabbri, E. and Pilati, F. (2009), "Qualification of pipe-grade HDPEs: Part I, development of a suitable accelerated ageing method", Polym. Testing, 28, 96-102. http://doi.org/10.1016/J.POLYMERTESTING.2008.11.006