Structural Monitoring and Maintenance

  • 제8권2호
  • /
  • Pages.125-150
  • /
  • 2021
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Sensor placement optimization for guided wave-based structural health monitoring

  • 투고 : 2019.06.04
  • 심사 : 2021.04.27
  • 발행 : 2021.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Sensor placement optimization is an attempt to reduce the cost and enhance the detection performance in structural health monitoring (SHM) systems. This paper aims at studying sensor placement optimization for SHM systems. The attention is paid to lamb wave or guided wave-based SHM (GWSHM). By using detection theory and Bayes risk framework the expected cost (loss) of decision making or Bayes risk for SHM system is minimized and the optimal detector is derived. The global detection and false alarm rate are used for quantifying the detector performance. In this framework the sensor coverage, directionality and probabilities of damage occurrence are all accounted for. The effect of cross-correlation among actuator-sensor pairs is then considered by presenting an appropriate model for covariance structure. Applying the genetic algorithm, the global false alarm rate is minimized for a target global detection rate and different levels of correlation. In addition, the receiver-operating characteristic (ROC) is determined to analyze the effect of correlation on the system performance and optimal arrangement. For demonstration of the effect of cross-correlation on damage detection a numerical analysis is carried out using ABAQUS standard. Finally, it is concluded that by increasing the correlation among actuator-sensor pairs, the performance of the SHM system decreases.

키워드

참고문헌

  1. Adams, D.E. (2007), Health Monitoring of Structural Materials and Components, John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex PO19 8SQ, England.
  2. Alem, B., Abedian, A. and Nasrollahi-Nasab, K. (2016), "Reference-free damage identification in plate-like structures using Lamb-wave propagation with embedded piezoelectric sensors", J. Aerosp. Eng., 29(6), 04016062. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000646
  3. Azarbayejani, M., El-Osery, A.I., Choi, K.K. and Taha, M.R. (2008), "A probabilistic approach for optimal sensor allocation in structural health monitoring", Smart Mater. Struct., 17(5), 1-11. https://doi.org/10.1088/0964-1726/17/5/055019
  4. Bagheri, A., Li, K. and Rizzo, P. (2013), "Reference-free damage detection by means of wavelet transform and empirical mode decomposition applied to Lamb waves", J. Intell. Mater. Syst. Struct., 24(2), 194-208. https://doi.org/10.1177/1045389X12460433
  5. Berger, J.O. (1980), Statistical Decision theory and Bayesian Analysis, Springer-Verlag, New York, USA.
  6. Coelho, C.K., Kim, S.B. and Chattopadhyay, A. (2011), "Optimal sensor placement for active guided wave interrogation of complex metallic components", Proceedings of Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Volume 7981, San Diego, CA, USA, March. https://doi.org/10.1117/12.880288
  7. Das, S., Chattopadhyay, A. and Zhou, X. (2009), "Acoustic based structural health monitoring for composites using optimal sensor placement: analysis and experiments", J. Reinf. Plastics Compos., 28(1), 83-97. https://doi.org/10.1177/0731684407084099
  8. Diligent, O., Grahn, T., Bostrom, A., Cawley, P. and Lowe, M.J.S. (2002), "The low-frequency reflection and scattering of the S0 Lamb mode from a circular through-thickness hole in a plate: Finite Element, analytical and experimental studies", J. Acoust. Soc. Am., 112(6), 2589-2601. https://doi.org/10.1121/1.1512292
  9. Ewald, V., Groves, R.M. and Benedictus, R. (2018), "Transducer placement option of lamb wave SHM system for hotspot damage monitoring", Aerospace, 5(2), 1-17. https://doi.org/10.3390/aerospace5020039
  10. Farrar, C.R. and Worden, K. (2013), Structural health monitoring: a machine learning perspective, John Wiley & Sons Ltd., The Atrium, Southern Gate, Chichester, West Sussex PO19 8SQ, England.
  11. Flynn, E.B. and Todd, M.D. (2010a), "A Bayesian approach to optimal sensor placement for structural health monitoring with application to active sensing", Mech. Syst. Signal Process., 24(4), 891-903. https://doi.org/10.1016/j.ymssp.2009.09.003
  12. Flynn, E.B. and Todd, M.D. (2010b), "Optimal Placement of Piezoelectric Actuators and Sensors for Detecting Damage in Plate Structures", J. Intell. Mater. Syst. Struct., 21(3), 265-274. https://doi.org/10.1177/1045389X09338080
  13. Gao, H. and Rose, J.L. (2006), "Ultrasonic sensor placement optimization in structural health monitoring using evolutionary strategy", AIP Conference Proceedings, 820(1), 1687-1693. https://doi.org/10.1063/1.2184724
  14. Gopalakrishnan, S., Ruzzene, M. and Hanagud, S. (2011), Computational Techniques for Structural Health Monitoring, Springer-Verlag London Limited, London, England.
  15. Grahn, T. (2003), "Lamb wave scattering from a circular partly through-thickness hole in a plate", Wave Motion, 37(1), 63-80. https://doi.org/10.1016/S0165-2125(02)00051-3
  16. Guo, H.Y., Zhang, L., Zhang, L.L. and Zhou, J.X. (2004), "Optimal placement of sensors for structural health monitoring using improved genetic algorithms", Smart Mater. Struct., 13(3), 528-534. https://doi.org/10.1088/0964-1726/13/3/011
  17. Hall, J.S., Fromme, P. and Michaels, J.E. (2014), "Guided wave damage characterization via minimum variance imaging with a distributed array of ultrasonic sensors", J. Nondestruct. Eval., 33(3), 299-308. https://doi.org/10.1007/s10921-013-0212-x
  18. Kammer, D.C. (1991), "Sensor placement for on-orbit modal identification and correlation of large space structures", J. Guid. Control Dyn., 14(2), 251-259. https://doi.org/10.2514/3.20635
  19. Kay, S.M. (1998), Fundamentals of Statistical Signal Processing, Volume 2: Detection Theory, Prentice-Hall and PTR, NJ, USA.
  20. Kim, S., Lee, J., Wang, H. and Hong, D. (2009), "Sensing performance of energy detector with correlated multiple antennas", IEEE Signal Process. Lett., 16(8), 671-674. https://doi.org/10.1109/LSP.2009.2021381
  21. Lee, B.C. and Staszewski, W.J. (2007), "Sensor location studies for damage detection with Lamb waves", Smart Mater. Struct., 16(2), 399-408. https://doi.org/10.1088/0964-1726/16/2/019
  22. Liu, F. (2007), "A general framework for spatial correlation modeling in VLSI design", Proceedings of the 44th Annual Design Automation Conference, San Diego, CA, USA, June.
  23. Liu, W., Gao, W.C., Sun, Y. and Xu, M.J. (2008), "Optimal sensor placement for spatial lattice structure based on genetic algorithms", J. Sound Vib., 317(1), 175-189. https://doi.org/10.1016/j.jsv.2008.03.026
  24. Liu, X., Zhou, C. and Jiang, Z. (2012), "Damage localization in plate-like structure using built-in PZT sensor network", Smart Struct. Syst., Int. J., 9(1) 21-33. https://doi.org/10.12989/sss.2012.9.1.021
  25. Mallardo, V., Aliabadi, M.H. and Sharif Khodaei, Z. (2012), "Optimal sensor positioning for impact localization in smart composite panels", J. Intell. Mater. Syst. Struct., 24(5), 559-573. https://doi.org/10.1177/1045389X12464280
  26. Michaels, J.E. and Michaels, T.E. (2007), "Guided wave signal processing and image fusion for in situ damage localization in plates", Wave Motion, 44(6), 482-492. https://doi.org/10.1016/j.wavemoti.2007.02.008
  27. Michaels, J.E., Hall, J.S. and Michaels, T.E. (2009), "Adaptive imaging of damage from changes in guided wave signals recorded from spatially distributed arrays", Proceedings of Health Monitoring of Structural and Biological Systems, Volume 7295, San Diego, CA, USA, March. https://doi.org/10.1117/12.815849
  28. Salmanpour, M., Sharif Khodaei, Z. and Aliabadi, M.H. (2016), "Transducer placement optimisation scheme for a delay and sum damage detection algorithm", Struct. Control Health Monitor., 24(4), 1-20. https://doi.org/10.1002/stc.1898
  29. Sharif-Khodaei, Z. and Aliabadi, M.H. (2014), "Assessment of delay-and-sum algorithms for damage detection in aluminium and composite plates", Smart Mater. Struct., 23, 075007. https://doi.org/10.1088/0964-1726/23/7/075007
  30. Shbat, M.S. and Tuzlukov, V. (2013), "Spectrum sensing under correlated antenna array using generalized detector in cognitive radio systems", Int. J. Antennas Propag., 2013, 1-8. https://doi.org/10.1155/2013/853746
  31. Sun, H. and Buyukozturk, O. (2015), "Optimal sensor placement in structural health monitoring using discrete optimization", Smart Mater. Struct., 24(12), 1-16. https://doi.org/10.1088/0964-1726/24/12/125034
  32. Tarhini, H., Itani, R. Fakih, M.A. and Mustapha, S. (2018), "Optimization of piezoelectric wafer placement for structural health-monitoring applications", J. Intell. Mater. Syst. Struct., 29(19), 1-16. https://doi.org/10.1177/1045389X18799204
  33. Thiene, M., Sharif Khodaei, Z. and Aliabadi, M.H. (2016), "Optimal sensor placement for maximum area coverage (MAC) for damage localization in composite structures", Smart Mater. Struct., 25(9), 1-21. https://doi.org/10.1088/0964-1726/25/9/095037
  34. Vanli, O.A., Zhang, C., Nguyen, A. and Wang, B. (2012), "A minimax sensor placement approach for damage detection in composite structures", J. Intel. Mater. Syst. Struct., 23(8), 919-932. https://doi.org/10.1177/1045389X12440751
  35. Venkat, R.S., Boller, C., Ravi, N., Chakraborty, N., Kamalakar, G.S., Ukirde, K. and Mahapatra, D.R. (2015), "Optimized actuator/ sensor combinations for structural health monitoring: simulation and experimental validation", In: International Workshop on Structural Health Monitoring, Stanford, CA, USA, September.
  36. Yang, C. (2018), "Sensor placement for structural health monitoring using hybrid optimization algorithm based on sensor distribution index and FE grids", Struct. Control Health Monitor., 25(6), 1-19. https://doi.org/10.1002/stc.2160
  37. Yi, T.H., Li, H.N. and Zhang, X.D. (2012a), "A modified monkey algorithm for optimal sensor placement in structural health monitoring", Smart Mater. Struct., 21(10), 1-9. https://doi:10.1088/0964-1726/21/10/105033
  38. Yi, T.H., Li, H.N. and Zhang, X.D. (2012b), "Sensor placement on Canton Tower for health monitoring using asynchronous-climb monkey algorithm", Smart Mater. Struct., 21(12), 1-9. https://doi.org/10.1088/0964-1726/21/12/125023
  39. Yi, T.H., Li, H.N. and Wang, C.W. (2016), "Multiaxial sensor placement optimization in structural health monitoring using distributed wolf algorithm", Struct. Control Health Monitor., 23(4), 719-734. https://doi.org/10.1002/stc.1806
  40. Zhou, G.D., Yi, T.H. and Li, H.N. (2014), "Sensor placement optimization in structural health monitoring using cluster-in-cluster firefly algorithm", Adv. Struct. Eng., 17(8), 1103-1115. https://doi.org/10.1260/1369-4332.17.8.1103