Smart Structures and Systems

  • 제27권3호
  • /
  • Pages.407-419
  • /
  • 2021
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Cluster analysis and damage identification for FRP/steel-confined RC column using AE technique

  • Du, Fangzhu (School of Civil Engineering, Shandong Jianzhu University) ;
  • Li, Dongsheng (School of Civil Engineering, Dalian University of Technology) ;
  • Qiu, Dapeng (School of Civil Engineering, Shandong Jianzhu University)
  • 투고 : 2019.03.10
  • 심사 : 2020.11.19
  • 발행 : 2021.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

This article presents the damage evaluation and pattern recognition for the newly proposed fiber reinforced polymer (FRP)/steel-confined reinforced concrete columns. The interaction of FRP material, steel tube, and reinforced concrete lead to complex damage mechanisms and invisible damage modes. The prevailing acoustic emission (AE) technique was applied to monitor the damage process and detect the sheltered damages under cyclic loading. Characteristic AE parameters, such as energy and duration, were extracted to disclose the damage evolution and evaluate the damage state. Three typical damage stages were identified. The fuzzy C-means (FCM) algorithm and particle swarm optimization (PSO) algorithm were applied as efficient clustering tools to discriminate different damage signals of FRP/steel-confined RC columns. Five types of damage mechanisms were identified and illustrated based on the statistical analysis of typical AE features. Furthermore, typical damage waveforms were extracted, the frequency content of each damage signal was discussed on the basis of wavelet transform.

키워드

과제정보

The authors are grateful for the financial support from the National Natural Science Foundation of China (NSFC) under Grant No. 51778104, and Doctoral Research Fund Project of Shandong Jianzhu University under Grant No. X20026Z0101, and the experimental teaching lab of civil engineering of Shandong Jianzhu University.

참고문헌

  1. Aggelis, D.G., Verbruggen, S., Tsangouri, E., Tysmans, T. and Van Hemelrijck, D. (2016), "Monitoring the failure mechanisms of a reinforced concrete beam strengthened by textile reinforced cement using acoustic emission and digital image correlation", Smart Struct. Syst., Int. J., 17(1), 91-105. https://doi.org/10.12989/sss.2016.17.1.091
  2. Davies, D.L. and Bouldin, D.W. (1979), "A cluster separation measure", IEEE Trans. Pattern Anal. Mach. Intel., 1(2), 224-227. https://doi.org/10.1109/TPAMI.1979.4766909
  3. DeGroot, P.J., Wijnen, P. and Janssen, R. (1995), "Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon epoxy composites", Compos. Sci. Technol., 55(4), 405-412. https://doi.org/10.1016/0266-3538(95)00121-2
  4. Gutkin, R., Green, C.J., Vangrattanachai, S., Pinho, S.T., Robinson, P. and Curtis, P.T. (2011), "On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses", Mech. Syst. Signal Pr., 25(4), 1393-1407. https://doi.org/10.1016/j.ymssp.2010.11.014
  5. Huang, L., Yin, P., Yan, L. and Kasal, B. (2016), "Behavior of hybrid GFRP-perforated-steel tube-encased concrete column under uniaxial compression", Compos. Struct., 142, 313-324. https://doi.org/10.1016/j.compstruct.2016.02.016
  6. Ji, H.G., Hou, Z.F., Zhang, L. and Wen, F.F. (2011), "Experimental studies on the frequency characteristics of acoustic emissions in concrete material and its dependences on strength parameters", Appl. Acoust., 30(2), 112-117. https://doi.org/10.3969/j.issn.1000-310X.2011.02.005
  7. Kadkhodapour, J., Butz, A. and Rad, S.Z. (2011), "Mechanisms of void formation during tensile testing in a commercial, dual-phase steel", Acta. Mater. 59(7), 2575-2588. https://doi.org/10.1016/j.actamat.2010.12.039
  8. Kumar, C.S., Arumugam, V., Sengottuvelusamy, R., Srinivasan, S. and Dhakal, H.N. (2017), "Failure strength prediction of glass/epoxy composite laminates from acoustic emission parameters using artificial neural network", Appl. Acoust., 115, 32-41. https://doi.org/10.1016/j.apacoust.2016.08.013
  9. Lai, Y.S., Xiong, Y. and Cheng, L.F. (2014), "Frequency band energy characteristics of acoustic emission signals in damage process of concrete under uniaxial compression", J. Vib. Shock, 32(2), 12-19.
  10. Li, L., Lomov, S.V., Yan, X. and Carvelli, V. (2014), "Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites", Compos. Struct., 116(1), 286-299. https://doi.org/10.1016/j.compstruct.2014.05.023
  11. Li, D.S., Chen, Z. and Feng, Q.M. (2015), "Damage analysis of CFRP-confined circular concrete-filled steel tubular columns by acoustic emission techniques", Smart. Mater. Struct., 24(8), 085017. https://doi.org/10.1088/0964-1726/24/8/085017
  12. Li, D.S., Du, F.Z., Chen, Z. and Wang, Y.L. (2016), "Identification of failure mechanisms for CFRP-confined circular concrete-filled steel tubular columns through acoustic emission signals", Smart Struct. Syst., Int. J., 18(3), 525-540. https://doi.org/10.12989/sss.2016.18.3.525
  13. Li, D.S., Du, F.Z. and Ou, J.P. (2017a), "Damage evaluation of fiber reinforced plastic-confined circular concrete-filled steel tubular columns under cyclic loading using the acoustic emission technique", Smart. Mater. Struct., 26(3), 035014. https://doi.org/10.1088/1361-665X/aa57c9
  14. Li, D.S., Yang, W. and Zhang, W. (2017b), "Cluster analysis of stress corrosion mechanisms for steel wires used in bridge cables through acoustic emission particle swarm optimization", Ultrasonics, 77, 22-31. https://doi.org/10.1016/j.ultras.2017.01.012
  15. Liu, J., Zhang, S., Zhang, X. and Guo, L. (2009), "Behavior and strength of circular tube confined reinforced-concrete (CTRC) columns", J. Constr. Steel Res., 65(7), 1447-1458. https://doi.org/10.1016/j.jcsr.2009.03.014
  16. Ma, G. and Li, H. (2017), "Acoustic emission monitoring and damage assessment of FRP-strengthened reinforced concrete columns under cyclic loading", Constr. Build. Mater., 144, 86-98. https://doi.org/10.1016/j.conbuildmat.2017.03.169
  17. Manson, G., Worden, K., Holford, K. and Pullin, R. (2001), "Visualisation and dimension reduction of acoustic emission data for damage detection", J. Intel. Mat. Syst. Struct., 12(8), 529-536. https://doi.org/10.1177/10453890122145375
  18. Marec, A., Thomas, J.H. and El Guerjouma, R. (2008), "Damage characterization of polymer-based composite materials: Multivariable analysis and wavelet transform for clustering acoustic emission data", Mech. Syst. Signal Pr. Special Issue: Mechatronics, 22(6), 1441-1464. https://doi.org/10.1016/j.ymssp.2007.11.029
  19. Nickabadi, A., Ebadzadeh, M.M. and Safabakhsh, R. (2011), "A novel particle swarm optimization algorithm with adaptive inertia weight", Appl. Soft Comput., 11(4), 3658-3670. https://doi.org/10.1016/j.asoc.2011.01.037
  20. Prem, P.R. and Murthy, A.R. (2016), "Acoustic emission monitoring of reinforced concrete beams subjected to four-point-bending", Appl. Acoust., 117, 28-38. https://doi.org/10.1016/j.apacoust.2016.08.006
  21. Qi, C., Fourie, A. and Chen, Q. (2018), "Neural network and particle swarm optimization for predicting the unconfined compressive strength of cemented paste backfill", Constr. Build. Mater., 159, 473-478. https://doi.org/10.1016/j.conbuildmat.2017.11.006
  22. Ramirez-Jimenez, C.R., Papadakis, N., Reynolds, N., Gan, T.H., Purnell, P. and Pharaoh, M. (2004), "Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event", Compos. Sci. Technol., 64(12), 1819-1827. https://doi.org/10.1016/j.compscitech.2004.01.008
  23. Sadegh, H., Mehdi, A.N. and Mehdi, A. (2016), "Classification of acoustic emission signals generated from journal bearing at different lubrication conditions based on wavelet analysis in combination with artificial neural network and genetic algorithm", Tribol. Int., 95, 426-434. https://doi.org/10.1016/j.triboint.2015.11.045
  24. Shao, J.D. and Rong, G. (2009), "Nonlinear process monitoring based on maximum variance unfolding projections", Expert Syst. Appl., 36(8), 11332-11340. https://doi.org/10.1016/j.eswa.2009.03.042
  25. Wang, Y.L., Cai, G.C., Li, Y.Y., Waldmann, D., Larbi, A.S. and Tsavdaridis, K.D. (2019), "Behavior of circular fiber-reinforced polymer-steel-confined concrete columns subjected to reversed cyclic loads: experimental studies and finite-element analysis", J. Struct. Eng.-ASCE, 145, 040190859. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002373
  26. Wang, Y.L., Cai, G.C., Larbi, A.S., Waldmann, D., Tsavdaridis, K.D. and Ran, J.H. (2020), "Monotonic axial compressive behaviour and confinement mechanism of square CFRP-steel tube confined concrete", Eng. Struct., 217, 110802. https://doi.org/10.1016/j.engstruct.2020.110802
  27. Wu, J.Y., Lan, C.M., Xian, G.J. and Li, H. (2018), "Recognition of damage pattern and evolution in CFRP cable with a novel bonding anchorage by acoustic emission", Smart Struct. Syst., Int. J., 21(4), 421-433. https://doi.org/10.12989/sss.2018.21.4.421
  28. Xie, X.L. and Beni, G. (1991), "A validity measure for fuzzy clustering", IEEE Trans. Pattern Anal. Mach. Intel., 13(13), 841-847. https://doi.org/10.1109/34.85677
  29. Zeng, J., Lv, J., Lin, G., Guo, Y. and Li, L. (2018), "Compressive behavior of double-tube concrete columns with an outer square FRP tube and an inner circular high-strength steel tube", Constr. Build. Mater., 184, 668-680. https://doi.org/10.1016/j.conbuildmat.2018.07.034
  30. Zhang, Y., Zhao, G., Zhou, J. and Zhu, R. (2013), "Acoustic emission analysis of frequency characteristic for 20 # steel during tensile process", Chem. Mach., 40(5), 569-573.
  31. Zhao, Z., Zhang, R., Cox, J., Duling, D. and Sarle, W. (2013), "Massively parallel feature selection: an approach based on variance preservation", Mach. Learn., 92(1), 195-220. https://doi.org/10.1007/s10994-013-5373-4
  32. Zhou, X., Liu, J. and Zhang, S. (2009), "Behavior of circular tubed reinforced concrete stub columns under axial compression", Eng. Mech., 26(11), 53-59.
  33. Zitto, M.E., Piotrkowski, R., Gallego, A., Sagasta, F. and Benavent-Climent, A. (2015), "Damage assessed by wavelet scale bands and b-value in dynamical tests of a reinforced concrete slab monitored with acoustic emission", Mech. Syst. Signal Pr., 60-61, 75-89. https://doi.org/10.1016/j.ymssp.2015.02.006