DOI QR코드

DOI QR Code

Heating Performance of Heat Pump System Using Dual Heat Source and Its Operation Characteristics

이중 열원 히트펌프 시스템의 난방 성능과 운전 특성

  • Lim, Hyojae (Geothermal Energy Education Center, Hoseo University) ;
  • Sohn, Byonghu (Korea Institute of Civil Engineering and Building Technology(KICT))
  • 임효재 (호서대학교 지열인력양성센터) ;
  • 손병후 (한국건설기술연구원 녹색건축연구센터)
  • Received : 2021.05.02
  • Accepted : 2021.05.19
  • Published : 2021.06.01

Abstract

This paper presents the heating performance analysis results of a heat pump system using a dual heat source. In this paper, a dual heat source refers to the ground-coupled heat exchanger using both a surface water heat exchanger (SWHE) and a vertical ground heat exchanger (VGHE). In order to evaluate the system performance, we installed a monitoring system to measure the temperature and power consumption of a heat pump and then collected operation data with 4 different load burdened ratios of the dual heat source heat exchanger. During the whole measurement period, the average heating capacity of a water-to-water heat pump unit was 37.3 kW. In addition, the compressor of the heat pump consumed 9.4 kW of power, while the circulating pump of the dual heat source heat exchanger used 6.7 kW of power. Therefore the average heating coefficient of performance (COP) for the heat pump unit was 4.0, while the entire system including the circulating pump was 2.7. Finally, the parallel use of SWHE and VGHE was beneficial to the system performance; however, further researches are needed to optimize the design data for various load ratios of the dual heat source heat exchanger.

Keywords

Acknowledgement

이번 논문은 과학기술정보통신부의 2020년도 재원으로 한국건설기술연구원 주요사업(20200057)에서 수행한 결과입니다. 아울러 논문의 일부 내용은 산업통상자원부의 재원으로 한국에너지기술평가원의 지원을 받아 수행한 연구(20143030110010) 결과입니다.

References

  1. Cabeza, L., and Chafer, M., 2020, Technological options and strategies towards zero energy buildings contributing to climate change mitigation: A systematic review, Energy and Buildings, Vol. 219, pp. 1-46.
  2. Kavanaugh, S. and Rafferty, K., 2014, Geothermal Heating and Cooling: Design of Ground-Source Heat Pump Systems, ASHRAE, Atlanta.
  3. Javadi, H., Ajarostaghi, S., Rosen, M. A., and Pourfallah, M., 2019, Performance of ground heat exchangers: A comprehensive review of recent advances, Energy, Vol. 178, pp. 207-233. https://doi.org/10.1016/j.energy.2019.04.094
  4. Lund, J. W., and Toth, A. N., 2021, Direct utilization of geothermal energy 2020 worldwide review, Geothermics, Vol. 90, 101915. https://doi.org/10.1016/j.geothermics.2020.101915
  5. Korea Energy Agency, 2021, New & Renewable Energy Statistics 2020(2019 Edition), pp. 34-37.
  6. Mitchell, M., and Spitler, J., 2014, Open-loop direct surface water cooling and surface water heat pump systems-A review, HVAC&R Research, Vol. 19, pp. 125-140.
  7. Hattemer, B., and Kavanaugh, S., 2005, Design temperature data for surface water heating and cooling systems, ASHRAE Transactions, Vol. 111, pp. 695-701.
  8. Chiasson, A., Spitler, J., Rees, S., and Smith, M., 2000, A model for simulating the performance of shallow pond as a supplemental heat rejecter with closed-loop ground-source heat pump systems, ASHRAE Transactions, Vol. 106, pp. 107-121.
  9. Do, S. L., and Haberl, J., 2016, Development and verification of a custom-built ground heat exchanger model for a case study building, Energy and Buildings, Vol. 119, pp. 242-255. https://doi.org/10.1016/j.enbuild.2016.03.049
  10. Lv, N., Zhang, Q., Chen, Z., and Wu, D., 2017, Simulation and analysis on the thermodynamic performance of surface water source heat pump system, Building Simulation, Vol. 10, pp. 65-73. https://doi.org/10.1007/s12273-016-0308-1
  11. Zou, S., and Xie, X., 2017, Simplified model for coefficient of performance calculation of surface water source heat pump, Applied Thermal Engineering, Vol. 112, pp. 201-207. https://doi.org/10.1016/j.applthermaleng.2016.10.081
  12. Chen, X., Zhang, G., Peng, J., Lin, X., and Liu, T., 2006, The performance of an open-loop lake water heat pump system in south China, Applied Thermal Engineering, Vol. 26, pp. 2255-2261. https://doi.org/10.1016/j.applthermaleng.2006.03.009
  13. Schibuola, H. and Scarpa, M., 2016, Experimental analysis of the performances of a surface water source heat pump, Energy and Buildings, Vol. 113, pp. 182-188. https://doi.org/10.1016/j.enbuild.2015.12.048
  14. Luo, J., Luo, Z., Xie, J., Xia, D., Huang, W., Shao, H., Xiang, W., and Rohn, J., 2018, Investigation of shallow geothermal potentials for different types of ground source heat pump systems (GSHP) of Wuhan city in China, Renewable Energy, Vol. 118, pp. 230-244. https://doi.org/10.1016/j.renene.2017.11.017
  15. Sohn, B., 2016, Preliminary analysis on design parameters and application effects of surface water heat exchanger (SWHE), Transactions of the Korea Society of Geothermal Energy Engineers, Vol. 12, No. 3, pp. 24-32. https://doi.org/10.17664/ksgee.2016.12.3.024
  16. Lim, H. J., Kong, H. J., and Sohn, B. 2017, Cooling performance of geothermal heat pump using surface water heat exchanger, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 29, No. 6, pp. 316-326. https://doi.org/10.6110/KJACR.2017.29.6.316
  17. Sohn, B., 2018, Cooling performance analysis of ground-source heat pump (GSHP) system with hybrid ground heat exchanger (HGHE), Transactions of the Korea Society of Geothermal Energy Engineers, Vol. 14, No. 4, pp. 43-52. https://doi.org/10.17664/KSGEE.2018.14.4.0043
  18. Sohn, B., 2020, Heating performance analysis of ground-source heat pump (GSHP) system using hybrid ground heat exchanger (HGHE), Transactions of the Korea Society of Geothermal Energy Engineers, Vol. 16, No. 3, pp. 8-16. https://doi.org/10.17664/KSGEE.2020.16.3.008
  19. DesignBuilder, 2019, DesignBuilder V6 Simulation Documentation, DesignBuilder Software Ltd.
  20. Gaia Geothermal, 2017, Ground Loop Design (GLD) Manual, Gaia Geothermal.
  21. Kline, S. J., 1985, The purpose of uncertainty analysis, J. Fluids Engineering, Vol. 107, pp. 153-160. https://doi.org/10.1115/1.3242449