Smart Structures and Systems

  • 제27권1호
  • /
  • Pages.89-99
  • /
  • 2021
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An innovative liquid metal-based pressure sensor with its application in geotechnical engineering

  • Shou, Yundong (School of Civil Engineering, Wuhan University) ;
  • Zhou, Xiaoping (School of Civil Engineering, Wuhan University) ;
  • Chang, Qingpeng (School of Civil Engineering, Chongqing University) ;
  • Liu, Chao (School of Civil Engineering, Chongqing University)
  • 투고 : 2020.04.05
  • 심사 : 2020.07.06
  • 발행 : 2021.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a monitoring system containing a novel liquid metal-based pressure sensor and remote interactive monitoring devices are fabricated to monitor stress in geotechnical engineering. The pressure sensor with the dimension of 34 mm × 34 mm is designed and manufactured, which is mainly composed of 40CrMoV alloy steel shell, polydimethylsiloxane (PDMS) and liquid metal gallium indium alloy (EGaIn). It has the characteristics of high stability, can greatly improve the measurement range of the pressure sensor (0 to 20 MPa), and its resistance variation is from 0 mΩ to 800 mΩ. In addition, the linear regression analysis is carried out to verify the linear relationship between the resistance of sensor and the applied pressure. It is found that the performance of the pressure sensor is fine through experiments with three different loading rates and fatigue experiments. The remote interactive monitoring device can be suitable for the field monitoring environment, which is composed of monitoring stations (MS), remote communication base stations (RCBS) and indoor working platform. Finally, the monitoring system is successfully applied to the field measurements in geotechnical engineering, and the field monitoring data are in good agreement with the numerical results.

키워드

과제정보

This work was supported by the National Natural Science Foundation of China (Grant Nos. 51839009, 51679017 and 41807251), the Natural Basic Research program 973 of China (Grant No. 2014CB046903), and the Fundamental Research Funds for the Central Universities (Grant No. 2042019kf0037).

참고문헌

  1. Ali, M.M. Narakathu, B.B., Emamian, S., Chlaihawi, A.A., Aljanabi, F., Maddipatla, D., Bazuin, B.J. and Atashbar, M.Z. (2016a), "Eutectic Ga-In Liquid Metal Based Flexible Capacitive Pressure Sensor", Proceedings of the 15th IEEE Sensors Conference, Orlando, FL, USA, October.
  2. Ali, S., Maddipatla, D., Narakathu, B.B., Chlaihawi, A.A., Emamian, S., Janabi, F., Bazuin, B.J. and Atashbar, M.Z. (2016b), "Flexible Capacitive Pressure Sensor Based on PDMS Substrate and Ga-In Liquid Metal", Proceedings of the 15th IEEE Sensors Conference, Orlando, FL, USA, October.
  3. Bakhoum, E.G. and Cheng, M.H.M. (2010a), "Capacitive pressure sensor with very large dynamic range", IEEE T. Compon. Pack. T., 33(1), 79-83. https://doi.org/10.1109/TCAPT.2009.2022949
  4. Bakhoum, E.G. and Cheng, M.H.M. (2010b), "Novel capacitive pressure sensor", J. Microelectromech. S., 19(3), 443-450. https://doi.org/10.1109/JMEMS.2010.2047632
  5. Barrias, A., Casas, J.R. and Villalba, S. (2016), "A review of distributed optical fiber sensors for civil engineering applications", Sensors, 16(5), 748. https://doi.org/10.3390/s16050748
  6. Berto, F., Lazzarin, P. and Marangon, C. (2014), "Fatigue strength of notched specimens made of 40CrMoV13.9 under multiaxial loading", Mater. Des., 54, 57-66. https://doi.org/10.1016/j.matdes.2013.08.013
  7. Chen, W., Gui, X., Liang, B., Yang, R., Zheng, Y., Zhao, C., Li, X., Zhu, H. and Tang, Z. (2017), "Structural Engineering for High Sensitivity, Ultrathin Pressure Sensors Based on Wrinkled Graphene and Anodic Aluminum Oxide Membrane", ACS Appl. Mater. Interfaces, 9(28), 24111-24117. https://doi.org/10.1021/acsami.7b05515
  8. Chossat, J.B., Park, Y.L., Wood, R.J. and Duchaine, V. (2013), "A Soft Strain Sensor Based on Ionic and Metal Liquids", IEEE Sensors J., 13(9), 3405-3414. https://doi.org/10.1109/JSEN.2013.2263797
  9. Chuang, C.H., Liou, Y.R. and Shieh, M.Y. (2012), "Flexible tactile sensor array for foot pressure mapping system in a biped robot", Smart Struct. Syst., Int. J., 9(6), 535-547. https://doi.org/10.12989/sss.2012.9.6.535
  10. Cui, Y., Gao, R.X., Yang, D. and Kazmer, D.O. (2007), "A bond graph approach to energy efficiency analysis of a self-powered wireless pressure sensor", Smart Struct. Syst., Int. J., 3(1), 1-22. https://doi.org/10.12989/sss.2007.3.1.001
  11. Gue, C.Y., Wilcock, M., Alhaddad, M.M., Elshafie, M., Soga, K. and Mair, R. (2014), "Monitoring the effects of tunneling under an existing tunnel-fibre optics", Proceedings of the 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, Seoul, Korea, August. https://doi.org/10.17863/CAM.7210
  12. Haeri, H. and Marji, M.F. (2016), "Simulating the crack propagation and cracks coalescence underneath TBM disc cutters", Arab. J. Geosci., 9(2), 124. https://doi.org/10.1007/s12517-015-2137-4
  13. Haeri, H., Shahriar, K. and Marji, M.F. (2013), "Simulating the bluntness of TBM disc cutters in rocks using displacement discontinuity method", Proceedings of the 13th International Conference on Fracture 2013, Beijing, China, June.
  14. Haeri, H., Tavakoli, H., Shemirani A.B., Sarfarazi, V. and Farazmand, M. (2016), "Evaluating the use of mineral pumice in falling zones of internal pressure tunnels (Case study: Water transfer tunnel of Sardasht dam power plant)", J. Min. Sci., 52, 1060-1068. https://doi.org/10.1134/S106273911606160X
  15. Holtz, R.D., Kovacs, W.D. and Sheahan, T.C. (2010), An Introduction to Geotechnical Engineering, Pearson, NJ, USA.
  16. Jia, J., Huang, G.T., Deng, J.P. and Pan, K. (2019), "Skin-inspired flexible and high-sensitivity pressure sensors based on rGO films with continuous-gradient wrinkles", Nanoscale, 11, 4258-4266. https://doi.org/10.1039/C8NR08503J
  17. Kim, T., Kim, D.M., Lee, B.J. and Lee, J. (2019), "Soft and Deformable Sensors Based on Liquid Metals", Sensors, 19(9), 4250. https://doi.org/10.3390/s19194250
  18. Klar, A., Levenberg, E., Tur, M. and Zadok, A. (2016), "Sensing for smart infrastructure: Prospective engineering applications", Proceedings of International Conference on Smart Infrastructure and Construction, Robinson College, Cambridge, United Kingdom, pp. 289-295. https://doi.org/10.1680/tfitsi.61279.289
  19. Kou, M.M, Liu, X.R., Tang, S.D. and Wang, Y.T. (2019), "3-D X-ray computed tomography on failure characteristics of rock-like materials under coupled hydro-mechanical loading", Theor. Appl. Fract. Mec., 104, 102396. https://doi.org/10.1016/j.tafmec.2019.102396
  20. Kurtz, A.D., Ned, A.A., Goodman, S. and Epstein, A.H. (2003), "Latest ruggedized high temperature piezoresistive transducers", NASA Propulsion Measurement Sensor Development Workshop, Huntsville, Alabama, USA, May.
  21. Kurtz, A.D., Ned, A.A. and Epstein, A.H. (2004), "Improved ruggedized SOI transducers operational above 600℃", Kulite Semiconductor Products, Inc. Twenty-First Transducer Workshop, Lexington, Maryland, June.
  22. Li, C., Cordovilla, F. and Ocana, J.L. (2017), "The design and analysis of a novel structural piezoresistive pressure sensor for low pressure measurement", Microsys. Technol., 23, 5677-5687. https://doi.org/10.1007/s00542-017-3427-4
  23. Minardo, A., Catalano, E., Coscetta, A., Zeni, G., Zhang, L., Maio, C.D., Vassallo, R., Coviello, R., Macchia, G., Picarelli, L. and Zeni, L. (2018), "Distributed Fiber Optic Sensors for the Monitoring of a Tunnel Crossing a Landslide", Remote Sens., 10(8), 1291. https://doi.org/10.3390/rs10081291
  24. Nisanth, A., Suja, K.J. and Komaragiri, R. (2014a), "Performance analysis of a silicon piezoresistive pressure sensor based on diaphragm geometry and piezoresistor dimensions", Proceedings of 2014 IEEE International Conference on Circuits, Power and Computing Technologies (ICCPCT), Nagercoil, India. https://doi.org/10.1109/ICCPCT.2014.7055011
  25. Nisanth, A., Suja, K.J. and Komaragiri, R. (2014b), "Sensitivity enhancement of a silicon based MEMS pressure sensor by optimization of size and position of piezoresistor", Proceedings of 2014 International Conference on Electronics and Communication Systems (ICECS), Coimbatore, India. https://doi.org/10.1109/ECS.2014.6892720
  26. Oh, J.H., Woo, J.Y., Jo, S. and Han, C.S. (2019), "Pressure-conductive rubber sensor based on liquid-metal-PDMS composite", Sensor Actuat A-Phys., 299, 111610. https://doi.org/10.1016/j.sna.2019.111610
  27. Orhan, M.H., Dogan, C., Kocaba, H. and Tepehan, G. (2001), "Experimental strain analysis of the high pressure strain gauge pressure transducer and verification by using a finite element method", Meas. Sci. Technol., 12(3), 335-344. https://doi.org/10.1088/0957-0233/12/3/313
  28. Park, Y.L., Tepayotl-Ramirez, D., Wood, R.J. and Majidi, C. (2012), "Influence of cross-sectional geometry on the sensitivity and hysteresis of liquid-phase electronic pressure sensors", Appl. Phys. Lett., 101(19), 1097-1104. https://doi.org/10.1063/1.4767217
  29. Raiendra, A., Parmar, B.J., Sharma, A.K., Bhojraj, H., Nayak, M.M. and Rajanna, K. (2005), "Pressure sensor development using hard anodized aluminum diaphragm and sputtered Pt-W thin film strain sensors", The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, Seoul, South Korea, Jun. https://doi.org/10.1109/SENSOR.2005.1497327
  30. Ryu, D., Loh, K.J., Ireland, R., Karimzada, M., Yaghmaie, F. and Gusman, A.M. (2011), "In situ reduction of gold nanoparticles in PDMS matrices and applications for large strain sensing", Smart Struct. Syst., Int. J., 8(5), 471-486. https://doi.org/10.12989/sss.2011.8.5.471
  31. Sarfarazi, V., Haeri, H., Shemirani A.B., Hedayat, A. and Hosseini, S.S. (2017), "Investigation of ratio of TBM disc spacing to penetration depth in rocks with different tensile strengths using PFC2D", Comput. Concrete, Int. J., 20(4), 429-437. https://doi.org/10.12989/cac.2017.20.4.429
  32. Sarfarazi, V., Haeri, H. and Safavi, S. (2019), "Interaction between two neighboring tunnel using PFC2D", Struct. Eng. Mech., Int. J., 71(1), 77-87. https://doi.org/10.12989/sem.2019.71.1.077
  33. Signore, M.A., Pascali, C.D., Rescio, G., Taurino, A., Dario, P., Iacovacci, V., Siciliano, P., Martucci, C., Melissano, E., Quaranta, F. and Francioso, L. (2018), "Fabrication and characterization of AlN-based flexible piezoelectric pressure sensor integrated into an artificial pancreas", Proceedings of the Eurosensors 2018 Conference, Graz, Austria, 2(13), 1037. https://doi.org/10.3390/proceedings2131037
  34. Soga, K. and Luo, L.Q. (2018), "Distributed fiber optics sensors for civil engineering infrastructure sensing", J. Struct. Integr. Maint., 3(1), 1-21. https://doi.org/10.1080/24705314.2018.1426138
  35. Stuchebnikov, V.M. (1991), "SOS strain gauge sensors for force and pressure transducers Sensor", Actuat. A-Phys., 28(3), 207-213. https://doi.org/10.1016/0924-4247(91)85009-D
  36. Tian, B., Zhao, Y.L., Niu, Z. and Jiang, Z.D. (2014), "Micropressure sensor dynamic performance analysis", Sensor Rev., 34(4), 367-373. https://doi.org/10.1108/SR-11-2013-748
  37. Vorathin, E., Hafizi, Z.M., Ismail, N. and Loman, M. (2020), "Review of high sensitivity fibre-optic pressure sensors for low pressure sensing", Opt. Laser Technol., 121, 105841. https://doi.org/10.1016/j.optlastec.2019.105841
  38. Wang, X., Gu, Y., Xiong, Z., Cui, Z. and Zhang, T. (2014), "Silk-molded flexible, ultrasensitive, and highly stable electronic skin for monitoring human physiological signals", Adv. Mater., 26(9), 1336-1342. https://doi.org/10.1002/adma.201304248
  39. Wang, X., Li, H.X., Wang, J. and Wu, A.J. (2019), "A novel fiber-optic pressure sensor device for measuring variceal pressure", Exp. Ther. Med., 18(6), 4413-4419. https://doi.org/10.3892/etm.2019.8071
  40. Xu, X.M., Soga, K., Nawaz, S., Moss, N., Bowers, K. and Gajia, M. (2015), "Performance monitoring of timber structures in underground construction using wireless SmartPlank", Smart Struct. Syst., Int. J., 15(3), 769-785. https://doi.org/10.12989/sss.2015.15.3.769
  41. Yan, J.W., Zhou, J.C., Lu, S.Q. and Tian, L. (2005), "Development and investigation trends of alloy thin film piezoresistive sensor", Mater. Rev., 19(12), 31-34. https://doi.org/10.3321/j.issn:1005-023X.2005.12.009
  42. Yu, H.Y. and Huang, J.Q. (2015), "Design and Application of a High Sensitivity Piezoresistive Pressure Sensor for Low Pressure Conditions", Sensors, 15(9), 22692-22704. https://doi.org/10.3390/s150922692
  43. Yu, H.Y., Qin, M. and Huang, J.Q. (2013), "A piezoresistive pressure sensor with improved sensitivity in low pressure condition", Proceedings of the 12th IEEE Sensors Conference, Baltimore, MD, USA, November. https://doi.org/10.1109/ICSENS.2013.6688390
  44. Zhang, S.R., Wen, B. and Cui, G.H. (2001), "A kind of SOS high temperature pressure transducer with double membrane", Journal of Natural Science of Heilongjiang University, 18(4), 56-58. http://dx.chinadoi.cn/10.3969/j.issn.1001-7011.2001.04.013
  45. Zhang, Y., Hu, Y.G., Zhu, P.L., Han, F., Zhu, Y., Sun, R. and Wong, C.P. (2017), "Flexible and Highly Sensitive Pressure Sensor Based on Microdome-Patterned PDMS Forming with Assistance of Colloid Self-Assembly and Replica Technique for Wearable Electronics", ACS Appl. Mater. Interfaces, 9(41), 35968-35976. https://doi.org/10.1021/acsami.7b09617
  46. Zhang, X.Y., Hu, Y.G., Gu, H., Zhu, P., Jiang, W.L., Zhang, G., Sun, R. and Wong, C.P. (2019), "A Highly Sensitive and Cost-Eective Flexible Pressure Sensor with Micropillar Arrays Fabricated by Novel Metal-Assisted Chemical Etching for Wearable Electronics", Adv. Mater. Technol., 4(9), 1900367. https://doi.org/10.1002/admt.201900367
  47. Zhao, Y.L., Zhao, L.B. and Jiang, Z.D. (2006), "High temperature and frequency pressure sensor based on silicon-on-insulator layers", Meas. Sci. Technol., 17(3), 519-523. https://doi.org/10.1088/0957-0233/17/3/S11
  48. Zhao, L.B., Guo, X., Meng, X.W., Hebibul, R., Zhao, Y.L., Wang, J.Z. and Jiang, Z.D. (2013), "An ultra-high pressure sensor with cylinder structure", J. Mech. Sci. Technol., 27(8), 2383-2389. https://doi.org/10.1007/s12206-013-0623-8
  49. Zhou, X.P., Bi, J. and Qian, Q.H. (2015), "Numerical simulation of crack growth and coalescence in rock-like materials containing multiple pre-existing flaws", Rock Mech. Rock Eng., 48, 1097-1114. https://doi.org/10.1007/s00603-014-0627-4
  50. Zhou, X.P., Deng, R.S. and Zhu, J.Y. (2018), "Three-layer-stacked pressure sensor with a liquid metal-embedded elastomer", J. Micromech. Microeng., 28(8), 085020. https://doi.org/10.1088/1361-6439/aac13c
  51. Zhou, X.P., He, Y. and Zeng, J. (2019), "Liquid metal antenna-based pressure sensor", Smart Mater. Struct., 28(2), 025019. https://doi.org/10.1088/1361-665X/aaf842.