DOI QR코드

DOI QR Code

Physical test and PFC modelling of rock pillar failure containing two neighboring joints and one hole

  • Sarfarazi, V. (Department of Mining Engineering, Hamedan University of Technology) ;
  • Abharian, S. (Department of Mining and Metallurgical Engineering, Amirkabir University) ;
  • Ghorbani, A. (Department of Mining and Metallurgical Engineering, Amirkabir University)
  • 투고 : 2020.08.06
  • 심사 : 2020.09.26
  • 발행 : 2021.01.25

초록

Experimental and discrete element methods were used to investigate the effects of both of the non-persistent joints and hole on the failure behaviour of rock pillars under uniaxial compressive test. Concrete samples with dimension of 150 mm × 150 mm × 50 mm were prepared. Within the specimen, two echelon non-persistent notches and one hole were provided. The hole was inserted at the middle of the specimen. two joints were distributed on the three diagonal planes. the angle of diagonal plane related to horizontal axis were 15°, 30° and 45°. The angle of joints related to diagonal plane were 30°, 45°, 60°. Totally, 9 different configuration systems were prepared. In these configurations, the length of joints was taken as 20 mm. diameter of hole was 20 mm. Similar to those for joints configuration systems in the experimental tests, 9 models with different echelon non-persistent joint were prepared in numerical model. The axial load was applied to the model by rate of 0.05 mm/min. the results show that the failure process was mostly governed by both of the non-persistent joint angle and diagonal plane angle. The compressive strengths of the specimens were related to the fracture pattern and failure mechanism of the discontinuities. It was shown that the shear behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the joint angle. The strength of samples increases by increasing both of the joint angle and diagonal plane angle. The failure pattern and failure strength are similar in both methods i.e., the experimental testing and the numerical simulation methods.

키워드

참고문헌

  1. Amadei, B. (1988), "Strength of a regularly jointed rock mass under biaxial and axisymmetric loading conditions", Int. J. Rock Mech. Min Sci., 25(3), 3-13. https://doi.org/10.1016/0148-9062(88)92712-X
  2. Coli, N., Berry, P. and Boldini, D. (2011), "In situ nonconventional shear tests for the mechanical characterization of a bimrock", Int. J. Rock Mech. Min. Sci., 48, 95-102. https://doi.org/10.1016/j.ijrmms.2010.09.012
  3. Cook, N.G.W. (1976), "Seismicity associated with mining", Eng. Geol., 10, 99-122. https://doi.org/10.1016/0013-7952(76)90015-6
  4. Cundall, P.A. and Strack, O.D.L. (1979), "A discrete numerical model for granular assemblies", Geotechnique, 29(1), 47-65. https://doi.org/10.1680/geot.1979.29.1.47
  5. Esmaieli, K., Hadjigeorgiou, J. and Grenon, M. (2010), "Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine", Int. J. Rock Mech. Min. Sci., 47(6), 915-926. https://doi.org/10.1016/j.ijrmms.2010.05.010
  6. Fang, Z. and Harrison, J.P. (2002), "Numerical analysis of progressive fracture and associated behaviour of mine pillars by use of a local degradation model", Trans. Instn. Min. Metal., 111, 59-72. https://doi.org/10.1179/mnt.2002.111.1.59
  7. Gerrard, C.M. (1982), "Elastic models of rock masses having one, two and three sets of joints", Int. J. Rock Mech. Min Sci., 19, 15-23. https://doi.org/10.1016/0148-9062(82)90706-9
  8. Ghazvinian, A., Sarfarazi, V., Schubert, W. and Blumel, M. (2012), "A study of the failure mechanism of planar non-persistent open joints using PFC2D", Rock Mech. Rock Eng., 45(5), 677-693. https://doi.org/10.1007/s00603-012-0233-2
  9. Hoek, E. and Brown, E.T. (1997), "Practical estimates of rock mass strength", Int. J. Rock Mech. Min. Sci., 34(8), 1165-1186. https://doi.org/10.1016/S1365-1609(97)80069-X
  10. Halakatevakis, N. and Sofianos, A. (2010), "Strength of a blocky rock mass based on an extended plane of weakness theory", Int. J. Rock Mech. Min Sci., 47(4), 568-582. https://doi.org/10.1016/j.ijrmms.2010.01.008
  11. Haeri, H. and Sarfarazi, V. (2016a), "The effect of micro pore on the characteristics of crack tip plastic zone in concrete", Comput. Concrete, Int. J., 17(1), 107-112. https://doi.org/10.12989/cac.2016.17.1.107
  12. Haeri, H. and Sarfarazi, V. (2016b), "The effect of non-persistent joints on sliding direction of rock slopes", Comput. Concrete, Int. J., 17(6), 723-737. https://doi.org/10.12989/cac.2016.17.6.723
  13. Haeri, H. and Sarfarazi, V. (2016c), "The deformable multilaminate for predicting the elasto-plastic behavior of rocks", Comput. Concrete, Int. J., 18, 201-214. https://doi.org/10.12989/cac.2016.18.2.201
  14. Haeri, H., Sarfarazi, V. and Lazemi, H.A. (2016d), "Experimental study of shear behavior of planar non-persistent joint", Comput. Concrete, Int. J., 17(5), 639-653. https://doi.org/10.12989/cac.2016.17.5.649
  15. Halakatevakis, N. and Sofianos, A. (2010), "Strength of a blocky rock mass based on an extended plane of weakness theory", Int. J. Rock Mech. Min Sci., 47(4), 568-582. https://doi.org/10.1016/j.ijrmms.2010.01.008
  16. Ivars, D.M., Pierce, M.E., Darcel, C., Reyes-Montes, J., Potyondy, D.O., Young, R.P. and Cundall, P.A. (2011), "The synthetic rock mass approach for jointed rock mass modelling", Int. J. Rock Mech Min Sci., 48(2), 219-244. https://doi.org/10.1016/j.ijrmms.2010.11.014
  17. Khani, A. (2013), "Numerical investigation of the effect of fracture intensity on deformability and REV of fractured rock masses", Int. J. Rock Mech. Min. Sci., 63, 104-112. https://doi.org/10.1016/j.ijrmms.2013.08.006
  18. Khani, A., Baghbanan, A., Norouzi, S. and Hashemolhosseini, H. (2013), "Effects of fracture geometry and stress on the strength of a fractured rock mass", Int. J. Rock Mech. Min. Sci., 60, 345-352. https://doi.org/10.1016/j.ijrmms.2013.01.011
  19. Kulatilake, H. and Stephansson, O. (1994), "Effect of finite size joints on the deformability of jointed rock at the two dimensional level", Can. Geo. Tech. J., 31, 364-374. https://doi.org/10.1139/t94-044
  20. Lin, Q., Cao, P., Cao, R., Lin, H. and Meng, J. (2020), "Mechanical behaviour around double circular openings in a jointed rock mass under uniaxial compression", Arch. Civil Mech. Eng., 20(1), 19. https://doi.org/10.1007/s43452-020-00027-z
  21. Martina, C.D. and Maybee, W.G. (2000), "The strength of hardrock pillars", Int. J. Rock Mech. Min. Sci., 37, 1239-1246. https://doi.org/10.1016/S1365-1609(00)00032-0
  22. Min, K.B. and Jing, L. (2003), "Numerical determination of the equivalent elastic compliance tensor for fractured rock masses using the distinct element method", Int. J Rock Mech. Min Sci., 40(6), 795-816. https://doi.org/10.1016/S1365-1609(03)00038-8
  23. Ozkan, I., Erdem, B.u.L.E.N.T. and Ceylanoglu, A. (2015), "Characterization of jointed rock masses for geotechnical classifications utilized in mine shaft stability analyses", Int. J. Rock Mech. Min. Sci., 73, 28-41. https://doi.org/10.1016/j.ijrmms.2014.10.001
  24. Palmstrom, A. and Singh, R. (2001), "The deformation modulus of rock masses: comparisons between in situ tests and indirect estimates", Tunnel. Undergr. Space Technol., 16, 115-131. https://doi.org/10.1016/S0886-7798(01)00038-4
  25. Potyondy, D.O. and Cundall, P.A. (2004), "A bonded-particle model for rock", Int. J. Rock Mech. Min. Sci., 41, 1329-1364. https://doi.org/10.1016/j.ijrmms.2004.09.011
  26. Protosenya, A. and Verbilo, P. (2016), "Forecast Jointed Rock Mass Compressive Strength Using a Numerical Model", MATEC Web of Conferences, Volume 73, Article number 04006.
  27. Ranjith, P.G., Fourar, M., Pong, S.F., Chian, W. and Haque, A. (2004), "Characterization of fractured rocks under uniaxial loading states", Int. J. Rock Mech. Min. Sci., 41, 43-48. https://doi.org/10.1016/j.ijrmms.2004.03.017
  28. Sarfarazi, V. and Haeri, H. (2016), "Effect of number and configuration of bridges on shear properties of sliding surface", J. Min. Sci., 52(2), 245-257. https://doi.org/10.1134/S1062739116020370
  29. Sarfarazi, V., Ghazvinian, A., Schubert, W., Blumel, M. and Nejati, H.R. (2014), "Numerical simulation of the process of fracture of Echelon rock joints", Rock Mech. Rock Eng., 47(4), 1355-1371. https://doi.org/10.1007/s00603-013-0450-3
  30. Sarfarazi, V., Faridi, H.R., Haeri, H. and Schubert, W. (2016), "A new approach for measurement of anisotropic tensile strength of concrete", Adv. Concrete Constr., Int. J., 3(4), 269-284. https://doi.org/10.12989/acc.2015.3.4.269
  31. Sarfarazi, V., Haeri, H., Shemirani, A. and Zhu, Z. (2017), "Shear behavior of non-persistent joint under high normal load". Strength Mater., 49, 320-334. https://doi.org/10.1007/s11223-017-9872-6
  32. Wang, P. (2016), "Numerical analysis on scale effect of elasticity, strength and failure patterns of jointed rock masses", Geosci. J., 20(4), 539-549. https://doi.org/10.1007/s12303-015-0070-x
  33. Yang, J.P., Chen, W.Z., Yang, D.S. and Yuan, J.Q. (2015), "Numerical determination of strength and deformability of fractured rock mass by FEM modeling", Comput. Geotech., 64, 20-31. https://doi.org/10.1016/j.compgeo.2014.10.011
  34. Yaylaci, M. (2016), "The investigation crack problem through numerical analysis", Struct. Eng. Mech., Int. J., 57(6), 1143-1156. https://doi.org/10.12989/sem.2016.57.6.1143
  35. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., Int. J., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241
  36. Yaylaci, M. and Birinci, A. (2015), "Analytical solution of a contact problem and comparison with the results from FEM", Struct. Eng. Mech., Int. J., 54(4), 607-622. https://doi.org/10.12989/sem.2015.54.4.607
  37. Yaylaci, M. and Avcar, M. (2020), "Finite element modeling of contact between an elastic layer and two elastic quarter planes", Comput. Concrete, Int. J., 26(2), 107-114. https://doi.org/10.12989/cac.2020.26.2.000
  38. Yaylaci, M., Terzi, C. and Avcar, M. (2019), "Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane", Struct. Eng. Mech., Int. J., 72(6), 775-783. https://doi.org/10.12989/sem.2019.72.6.000
  39. Yaylaci, E.U., Yaylaci, M., Olmez, H. and Birinci, A. (2020), "Artificial neural network calculations for a receding contact problem", Comput. Concrete, Int. J., 25(6), 551-563. https://doi.org/10.12989/cac.2020.25.6.000

피인용 문헌

  1. Study on the propagation mechanism of blast waves using the ultra-dynamic strain test system vol.28, pp.1, 2021, https://doi.org/10.12989/sss.2021.28.1.143