Structural Engineering and Mechanics

  • 제78권5호
  • /
  • Pages.519-528
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental determination of the resistance of a single-axis solar tracker to torsional galloping

  • Martinez-Garcia, Eva (Department of Energy, University of Oviedo, Engineering Polytechnic School of Gijon) ;
  • Marigorta, Eduardo Blanco (Department of Energy, University of Oviedo, Engineering Polytechnic School of Gijon) ;
  • Gayo, Jorge Parrondo (Department of Energy, University of Oviedo, Engineering Polytechnic School of Gijon) ;
  • Navarro-Manso, Antonio (Department of Energy, University of Oviedo, Engineering Polytechnic School of Gijon)
  • 투고 : 2020.08.18
  • 심사 : 2021.03.13
  • 발행 : 2021.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

One of the most efficient designs of solar trackers for photovoltaic panels is the single-axis tracker, which holds the panels along a torque tube that is driven by a motor at the central section. These trackers have evolved to become extremely slender structures due to mechanical optimization against static load and the need of cost reduction in a very competitive market. Owing to the corresponding decrease in mechanical resistance, some of these trackers have suffered aeroelastic instability even at moderate wind speeds, leading to catastrophic failures. In the present work, an analytical and experimental approach has been developed to study that phenomenon. The analytical study has led to identify the dimensionless parameters that govern the motion of the panel-tracker structure. Also, systematic wind tunnel experiments have been carried out on a 3D aeroelastic scale model. The tests have been successful in reproducing the aeroelastic phenomena arising in real-scale cases and have allowed the identification and a close characterization of the phenomenon. The main results have been the determination of the critical velocity for torsional galloping as a function of tilt angle and a calculation methodology for the optimal sizing of solar tracker shafts.

키워드

과제정보

This research has been developed in the framework of the FC-GRUPIN- IDI/2018/000205 project, supported by the "Principado de Asturias - Plan de Ciencia, Tecnologia e Innovacion", co-financed by FEDER funds.

참고문헌

  1. Aydogdu, M., Arda, M. and Filiz, S. (2018), "Vibration of axially functionally graded nano rods and beams with a variable nonlocal parameter", Adv. Nano Res., 6(3), 257-278. https://doi.org/10.12989/anr.2018.6.3.257.
  2. Blevins, R.D. (1990), Flow-Induced Vibration, 2 nd Edition, Van Nostrand Reinhold Co., New York, NY, USA.
  3. Dyrbye, C. and Hansen, S.O. (1997), Wind Loads on Structures, John Wiley & Sons, Ltd., Baffins Lane Chichester, Sussex, UK.
  4. Ebrahimi, F., Barati, M.R. and Civalek, O. (2020), "Application of Chebyshev-Ritz method for static stability and vibration analysis of nonlocal microstructure-dependent nanostructures", Eng. Comput., 36, 953-964. https://doi.org/10.1007/s00366-019-00742-z.
  5. Fan, X., Wang, Z., Chen, X., Wang, Y. and Tan, W. (2020), "Experimental investigation on flow-induced vibration of flexible multi cylinders in atmospheric boundary layer", Int. J. Mech. Sci., 183, 105815. https://doi.org/10.1016/j.ijmecsci.2020.105815.
  6. Jia, J. (2011), "Wind and structural modelling for an accurate fatigue life assessment of tubular structures", Eng. Struct., 33, 477-491. https://doi.org/10.1016/j.engstruct.2010.11.004.
  7. Jubayer, C.M. and Hangan, H. (2015), "Numerical simulation of wind effects on a stand-alone ground mounted Photovoltaic (PV) system", J. Wind. Eng. Ind. Aerodyn., 134, 1-37. https://doi.org/10.1016/j.jweia.2014.08.008.
  8. Katariya, P.V. and Panda, S.K. (2019), "Numerical frequency analysis of skew sandwich layered composite shell structures under thermal environment including shear deformation effects", Struct. Eng. Mech., 71(6), 657-668. https://doi.org/10.12989/sem.2019.71.6.657.
  9. Lave, M. and Kleissl, J. (2011), "Optimum fixed orientations and benefits of tracking for capturing solar radiation in the continental", Renew. Energy, 36, 1145-52. https://doi.org/10.1016/j.renene.2010.07.032.
  10. Mohammadnejad, M. (2015), "A new analytical approach for determination of flexural, axial and torsional natural frequencies of beams", Struct. Eng. Mech., 55(3), 655-674. https://doi.org/10.12989/SEM.2015.55.3.655.
  11. Paidoussis, M.P., Price, S.J. and De Langre, E. (2011), Fluid Structure Interaction: Cross Flow Induced Instabilities, Cambridge University Press, Cambridge, UK.
  12. Rao, S.S. (2007), Vibration of Continuous Systems, Wiley, New York.
  13. Rodriguez Lastra, M., Fernandez Oro, J.M., Galdo Vega, M., Blanco Marigorta, E. and Santolaria Morros, C. (2013), "Novel design and experimental validation of a contraction nozzle for aerodynamic measurements in a subsonic wind tunnel", J. Wind. Eng. Ind. Aerodyn., 118(3), 5-43. https://doi.org/10.1016/j.jweia.2013.04.008.
  14. Roedel, A. and Upfill-Brown, S. (2018), "Designing for the Wind, using dynamic wind analysis and protective stow strategies to lower solar tracker lifetime costs", White Paper, NEXTracker.
  15. Rohr, C., Bourke, P.A. and Banks, D. (2015), "Torsional instability of single-axis solar tracking systems", Proc. 14th Int. Conf. Wind. Eng., Porto Alegre Brazil, June.
  16. Simiu, E. and Scanlan, R.H. (1996), Wind Effects on Structures: Fundamentals and Applications to Design, 3th Edition, John Wiley & Sons, Ltd., New York, NY, USA.
  17. Strobel, K. and Banks, D. (2014), "Effects of vortex shedding in arrays of long inclined flat plates and ramifications for ground-mounted photovoltaic arrays", J. Wind. Eng. Ind. Aerodyn., 133, 146-149. https://doi.org/10.1016/j.jweia.2014.06.013.
  18. Talavera, D.L., Munoz-Ceron, E., Ferrer-Rodriguez, J.P. and Perez-Higueras, P.J. (2019), "Assessment of cost-competitiveness and profitability of fixed and tracking photovoltaic systems: the case of five specific sites", Renew. Energy, 134, 902-913. https://doi.org/10.1016/j.renene.2018.11.091.
  19. Taylor, Z.J. and Browne, M.T.L. (2020), "Hybrid pressure integration and buffeting analysis for multi-row wind loading in an array of single-axis trackers", J. Wind. Eng. Ind. Aerodyn., 197, 104056. https://doi.org/10.1016/j.jweia.2019.104056.
  20. Yang, Y. (2010), "Experimental investigations of vortex induced vibration of a flat plate in pitch oscillation", M.Eng. Dissertation, A&M University, Texas.