DOI QR코드

DOI QR Code

Large-scaled truss topology optimization with filter and iterative parameter control algorithm of Tikhonov regularization

  • Nguyen, Vi T. (Department of Architectural Engineering, Sejong University) ;
  • Lee, Dongkyu (Department of Architectural Engineering, Sejong University)
  • 투고 : 2019.05.17
  • 심사 : 2021.04.09
  • 발행 : 2021.06.10

초록

There are recently some advances in solving numerically topology optimization problems for large-scaled trusses based on ground structure approach. A disadvantage of this approach is that the final design usually includes many bars, which is difficult to be produced in practice. One of efficient tools is a so-called filter scheme for the ground structure to reduce this difficulty and determine several distinct bars. In detail, this technique is valuable for practical uses because unnecessary bars are filtered out from the ground structure to obtain a well-defined structure during the topology optimization process, while it still guarantees the global equilibrium condition. This process, however, leads to a singular system of equilibrium equations. In this case, the minimization of least squares with Tikhonov regularization is adopted. In this paper, a proposed algorithm in controlling optimal Tikhonov parameter is considered in combination with the filter scheme due to its crucial role in obtaining solution to remove numerical singularity and saving computational time by using sparse matrix, which means that the discrete optimal topology solutions depend on choosing the Tikhonov parameter efficiently. Several numerical examples are investigated to demonstrate the efficiency of the filter parameter control algorithm in terms of the large-scaled optimal topology designs.

키워드

과제정보

This research was supported by a grant (NRF-2020R1A4A2002855) from NRF (National Research Foundation of Korea) funded by MEST (Ministry of Education and Science Technology) of Korean government.

참고문헌

  1. Achtziger, W. (1997), "Topology optimization of discrete structures: an introduction in view of computational and nonsmooth aspects", Topology optimization in structural mechanics, Springer-Heidelberg, 57-100.
  2. Achtziger, W. (2007), "On simultaneous optimization of truss geometry and topology", Struct. Multidiscip. O., 33, 285-304. https://doi.org/10.1007/s00158-006-0092-0.
  3. Achtziger, W., Bendsoe, M., Bental, A. and Zowe, J. (1992), "Equivalent displacement based formulations for maximum strength truss topology design", Impact Comput. Sci. Eng., 4(4) 315-345. https://doi.org/10.1016/0899-8248(92)90005-S.
  4. Banh, T.T. and Lee, D.K. (2018), "Multi-material topology optimization of Reissner-Mindlin plates using MITC4", Steel Compos. Struct., 27(1), 27-33. https://doi.org/10.12989/scs.2018.27.1.027.
  5. Beck, A. and Teboulle, M. (2009), "A fast iterative shrinkage-thresholding algorithm for linear inverse problems", SIAM J. Imaging Sci., 2, 183-202. https://doi.org/10.1137/080716542.
  6. Dorn, W., Gomory, R. and Greenberg, H. (1964), "Automatic design of optimal structure", J. Mech., 3, 25-52. https://doi.org/10.1016/0022-2569(68)90027-X
  7. Draper, N.R. and Smith, H. (1998), "Applied Regression Analysis", Wiley Series in Probability and Statistics.
  8. Engl, H.W. (1987), "On the choice of the regularization parameter for iterated Tikhonov regularization of ill-posed problems", J. Approx. Theory, 49(1), 55-63. https://doi.org/10.1016/0021-9045(87)90113-4.
  9. Frommer, A. and Maass, P. (1999), "Fast CG-based methods for Tikhonov-Phillips regularization", SIAM J. Sci. Comput., 20(5), 1831-1850. https://doi.org/10.1137/S1064827596313310.
  10. Gilbert, M. and Tyas, A. (2003), "Layout optimization of large-scale pin-jointed frames", Eng. Comput., 20(8), 1044-1064. https://doi.org/10.1108/02644400310503017.
  11. Goloub, B., Heath, M. and Wahba, G. (1979), "Generalized cross-validation as a method for choosing a good ridge parameter", Technometrics, 21(2), 215-223. https://doi.org/10.1080/00401706.1979.10489751
  12. Hansen, P.C. (2010), "Discrete inverse problems - Insight and algorithms", SIAM, Philadelphia, USA.
  13. Hemp, W. (1973), "Optimum structures", Oxford University press, Oxford.
  14. Michell, A. (1904), "The limits of economy of material in frame structures", Philos Mag., 589-597.
  15. Mozorov, V.A. (1966), "On the regularization of ill-posed problems and selection of regularization parameter", J. Comput. Math. Phys., 6, 170-175.
  16. Nguyen, A.P., Banh, T.T., Lee, D., Lee, J., Kang, J. and Shin, S. (2018), "Design of multiphase carbon fiber reinforcement of crack existing concrete structures using topology optimization", Steel Compos. Struct., 29(5), 635-645. https://doi.org/10.12989/scs.2018.29.5.635.
  17. Ramos, Jr. A.S. and Paulino, G.H. (2016), "Filtering structures out of ground structures - a discrete filtering tool for structural design optimization", Struct. Multidiscip. O., 95-116. https://doi.org/10.1007/s00158-015-1390-1.
  18. Sandre, E.D., Ramos, Jr. A.S. and Paulino, G.H. (2017), "A maximum filter for the ground structure method: An optimization tool to harness multiple structural designs", Eng. Struct., 151, 235-252. https://doi.org/10.1016/j.engstruct.2017.07.064.
  19. Sokol, T. (2011), "A 99 line code for discretized Michell truss optimization written in Mathematica", Struct. Multidiscip. O., 43, 181-190. https://doi.org/10.1007/s00158-010-0557-z.
  20. Sokol, T. (2014), "Multi-load truss topology optimization using the adaptive ground structure approach", Recent Advances in Computational Mechanics, CRC Press, London, Chapter 2, 9-16.
  21. Sokol, T. (2016), "A new adaptive ground structure method for multi-load spatial Michell structures", Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues, CRC Press, 525-528.
  22. Tikhonov, A.N. and Arsenin, V.Y. (1977), "Method for solving ill-posed problems", Wiley, New York.
  23. Zegard, T. and Paulino, G.H. (2014), "GRAND-Ground structure based topology optimization for arbitrary 2D domains using MATLAB", Struct. Multidiscip. O., 50, 861-882. https://doi.org/10.1007/s00158-014-1085-z.
  24. Zhou, M. (1996), "Difficulties in truss optimization with stress and local buckling constraints", Struct. Optim., 11, 134-136. https://doi.org/10.1007/BF01376857.