DOI QR코드

DOI QR Code

Development of DC Controller for Battery Control for Elevator Car

  • Lee, Sang-Hyun (Department of Computer Engineering, Honam University, Korea Break The Rules Co., Ltd.) ;
  • Kim, Sangbum (Department of Computer Engineering, Honam University, Korea Break The Rules Co., Ltd.)
  • 투고 : 2021.02.27
  • 심사 : 2021.03.07
  • 발행 : 2021.05.31

초록

Among transport vehicles, Special Vehicles (SVs) are seriously exposed to energy and environmental problems. In particular, elevator cars used when moving objects in high-rise buildings increase the engine's rotational speed (radian per second: RPM). At this time, when the vehicle accelerates rapidly while idling, energy consumption increases explosively along with the engine speed, and a lot of soot is generated. The purpose of this paper is to develop a bi-directional DC-DC converter for control of vehicle power and secondary battery used in an elevated ladder vehicle (EC) used in the moving industry. As a result of this paper, the performance test of the converter was conducted. The charging/discharging state of the converter was simulated using DC power supply and DC electronic load, and a performance experiment was conducted to measure the input/output power of the converter through a power meter. Through this experimental result, it was confirmed that the efficiency was more than 92% in Buck mode and Boost mode at maximum 1.2kW output.

키워드

과제정보

This results was supported by "Regional Innovation Strategy(RIS)" through the National Research Foundation of korea(NRF) funded by the Ministry of Education(MOE).

참고문헌

  1. S. B. Kong, J. H. Lee, S. K. Joo, T. Y. Song, Y. J. Kim, "Effect of Electric Vehicle deployment on System Marginal Price(SMP)," KIEE Summer Conference Publications, 2010. 7.
  2. J. S. Kim, J. H. Cho, S. C. Park, B. T. Kim, D. K. Kim, "Design of Interior Permanent Magnet Synchronous Motor for AEV(Agricultural Electric Vehicle)," KIEE Eletric Machine and Energy Conversion Systems Site, Spring Conference Publications, 2010. 4.
  3. Y. H. Lho, "A Study on Effective Control Methodology for DC/DC Converter," Journal of Institute of Control, Robotics and Systems, Vol.20, No. 7, pp. 756-759, 2004. DOI: http://dx.doi.org/10.5302/J.ICROS.2014.13.8010
  4. S. Choi, "Interval-based controller design considering parameter variations for DC/DC converters," Journal of ICROS (in Korean), Vol. 19, No. 10, pp. 879-885, Oct. 2013. DOI: https://doi.org/10.5302/J.ICROS.2013.13.8005
  5. Y. C. Cho, D. S. Shin, "Design Method Solving Unbalanced Current Problem with Single Current Sensor for 2-Phase Interleaved Converters," The korean institute of power electronics, Conference Publications, pp. 415-416, 2020.8.
  6. K. H. Um, "AC TO AC Direct Voltage Conversion Using a Solid State Transformer," International Journal of Internet, Broadcasting and Communication, Vol.5 No.1, pp.6-8, 2013. DOI: https://doi.org/10.7236/IJIBC.2013.5.1.6
  7. J. Y. Hwang, D. O. Kim, S. M. Jeong, G. H. Lee, "A Study on the Current Measurement Technique of Low Voltage type Inverter Using Characteristics of MOSFET," The Korean Society Of Automotive Engineers, Autumn Conference, pp.720-720, 2020.
  8. D. Y. Lim, J.W. Im, J. H. Choi, G. B. Chung, "PSIM Simulator for Analysis of Series HEV Operation ," THE TRANSACTIONS OF KOREAN INSTITUTE OF POWER ELECTRONICS Vol. 15, No. 6, pp. 487-497, 2010. DoI: https://doi.org/10.6113/TKPE.2010.15.6.487
  9. Khairy Sayed, Keiki Morimoto, Soon-Kurl Kwon, Katsumi Nishida, Mutsuo Nakaoka, "DC-DC Converter with Three-Phase Power Factor Correction for Arc Welder," 8th International Conference on Power Electronics - ECCE Asia, pp. 1273-1277, 2011. DOI: https://doi.org/10.1109/ICPE.2011.5944714