Geomechanics and Engineering

  • 제25권4호
  • /
  • Pages.303-315
  • /
  • 2021
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A similarity solution for undrained expansion of a cylindrical cavity in K0-consolidated anisotropic soils

  • Wang, You (Department of Civil Engineering, Tongji University) ;
  • Lin, Lin (School of Highway, Chang'an University) ;
  • Li, Jingpei (Department of Civil Engineering, Tongji University)
  • 투고 : 2020.08.24
  • 심사 : 2021.05.11
  • 발행 : 2021.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

A rigorous and generic similarity solution is developed for assessment of the undrained expansion responses of a cylindrical cavity expansion in K0-consolidated anisotropic soils. A K0-consolidated anisotropic modified Cam-clay (K0-AMCC) model that can represent the initial stress anisotropy and the effects of stress-induced anisotropy is used to model the soil behaviors during cavity expansion. All the seven basic unknowns, the three stress components, the pore water pressure, the particle velocity, the specific volume and the hardening parameter, are reduced to the functions of a dimensionless radial coordinate and are taken as coupled variables to formulate the problem. The governing equations are formulated by making use of the equilibrium equation, the constitutive equation, the consistency condition, the continuity condition and the undrained condition, which are then solved as an initial value problem. The proposed rigorous similarity solution is compared with some well-documented rigorous solutions to validate the solution and to highlight the special expansion responses in anisotropic soils. The results reveal that the present solution can yield more predictions for cavity expansion problems in soils with initial anisotropic stresses.

키워드

과제정보

This study is financially supported by the National Natural Science Foundation of China (Grant No. 41772290).

참고문헌

  1. Cao, L.F., Teh, C.I. and Chang, M.F. (2001), "Undrained cavity expansion in modified Cam clay I: Theoretical analysis", Geotechnique, 51(4), 323-334. https://doi.org/10.1680/geot.2001.51.4.323.
  2. Carter, J.P., Booker, J.R. and Yeung, S.K. (1986), "Cavity expansion in cohesive frictional soils", Geotechnique, 36(3), 349-358. https://doi.org/10.1680/geot.1986.36.3.349.
  3. Chang, M.F., Teh, C.I. and Cao, L.F. (2001), "Undrained cavity expansion in modified Cam clay II: Application to the interpretation of the piezocone test", Geotechnique, 51(4), 335-350. https://doi.org/10.1680/geot.2001.51.4.335.
  4. Chen, H.H., Li, L., Li, J.P. and Wang, H. (2019), "Stress transform method to undrained and drained expansion of a cylindrical cavity in anisotropic modified cam-clay soils", Comput. Geotech., 106, 128-142. https://doi.org/10.1016/j.compgeo.2018.10.016.
  5. Chen, S.L. and Abousleiman, Y.N. (2012), "Exact undrained elasto-plastic solution for cylindrical cavity expansion in modified Cam Clay soil", Geotechnique, 62(5), 447-456. https://doi.org/10.1680/geot.11.P.027.
  6. Chen, S.L. and Liu, K. (2018), "Undrained cylindrical cavity expansion in anisotropic critical state soils", Geotechnique, 69(3), 189-202. https://doi.org/10.1680/jgeot.16.p.335.
  7. Collins, I.F. and Stimpson, J.R. (1994), "Similarity solutions for drained and undrained cavity expansions in soils", Geotechnique, 44(1), 21-34. https://doi.org/10.1680/geot.1994.44.1.21.
  8. Cudmani, R. and Osinov, V.A. (2001), "The cavity expansion problem for the interpretation of cone penetration and pressuremeter tests", Can. Geotech. J., 38(3), 622-638. https://doi.org/10.1139/t00-124.
  9. Dafalias, Y.F. (1986), "An anisotropic critical state soil plasticity model", Mech. Res. Commun., 13(6), 341-347. https://doi.org/10.1016/0093-6413(86)90047-9.
  10. dos Santos, T., Vaz-Romero, A. and Rodriguez-Martinez, J.A. (2019), "Dynamic cylindrical cavity expansion in orthotropic porous ductile materials", Int. J. Impact Eng., 132, 103325. https://doi.org/10.1016/j.ijimpeng.2019.103325.
  11. Gao, Y., Li, Z., Sun, D.A. and Yu, H.H. (2021), "A simple method for predicting the hydraulic properties of unsaturated soils with different void ratios", Soil Till. Res., 209, 104913. https://doi.org/10.1016/j.still.2020.104913.
  12. Houlsby, G.T. and Withers, N.J. (1988), "Analysis of the cone pressuremeter test in clay", Geotechnique, 38(4), 575-587. https://doi.org/10.1680/geot.1988.38.4.575.
  13. Johnsen, J., Holmen, J.K., Warren, T.L. and Borvik, T. (2018), "Cylindrical cavity expansion approximations using different constitutive models for the target material", Int. J. Protective Struct., 9(2), 199-225. https://doi.org/10.1177%2F2041419617741321. https://doi.org/10.1177%2F2041419617741321
  14. Ladanyi, B. (1963), "Expansion of a cavity in a saturated clay medium", J. Soil Mech. Found. Div., 89(4), 127-164. https://doi.org/10.1061/JSFEAQ.0000524
  15. Li, C. and Zou, J.F. (2019), "Closed-form solution for undrained cavity expansion in anisotropic soil mass based on spatially mobilized plane failure criterion", Int. J. Geomech., 19(7), 04019075. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001458.
  16. Li, J.P., Gong, W.B., Li, L. and Liu, F. (2017), "Drained elastoplastic solution for cylindrical cavity expansion in K0-consolidated anisotropic soil", J. Eng. Mech., 143(11), 04017133. https://doi.org/10.1061/(ASCE)em.1943-7889.0001357.
  17. Li, L., Chen, H.H., Li, J.P. and Sun, D.A. (2021), "An elastoplastic solution to undrained expansion of a cylindrical cavity in SANICLAY under plane stress condition", Comput. Geotech., 132: 103990. https://doi.org/10.1016/j.compgeo.2020.103990.
  18. Li, L., Li, J.P. and Sun, D.A. (2016), "Anisotropically elasto-plastic solution to undrained cylindrical cavity expansion in K0-consolidated clay", Comput. Geotech., 73, 83-90. https://doi.org/10.1016/j.compgeo.2015.11.022.
  19. Marshall, A.M. (2012), "Tunnel-pile interaction analysis using cavity expansion methods", J. Geotech. Geoenviron. Eng., 138(10), 1237-1246. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000709.
  20. Matsuoka, H. and Sun, D.A. (2014), The SMP Concept-Based 3D Constitutive Models for Geomaterials, CRC Press.
  21. Mo, P.Q., Gao, X.W., Yang, W.B. and Yu, H.S. (2020a), "A cavity expansion-based solution for interpretation of CPTu data in soils under partially drained conditions", Int. J. Numer. Anal. Met., 44(7), 1053-1076. https://doi.org/10.1002/nag.3050.
  22. Mo, P.Q., Ma, D.Y., Zhu, Q.Y. and Hu, Y.C. (2020b), "Interpretation of heating and cooling data from thermal cone penetration test using a 1D numerical model and a PSO algorithm", Comput. Geotech., 130, 103908. https://doi.org/10.1016/j.compgeo.2020.103908.
  23. Mo, P.Q., Marshall, A.M. and Fang, Y. (2021), "Cavity expansion-contraction-based method for tunnel-soil-pile interaction in a unified clay and sand model: drained analysis", Int. J. Geomech., 21(5), 04021055. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002016.
  24. Moug, D.M., Boulanger, R.W, DeJong, J.T. and Jaeger, R.A. (2019), "Axisymmetric simulations of cone penetration in saturated clay", J. Geotech. Geoenviron. Eng., 145(4), 04019008. https://doi.org/10.1061/(asce)gt.1943-5606.0002024.
  25. Peng, Y., Liu, H.L., Li, C., Ding, X.M., Deng, X., and Wang, C.Y. (2021), "The detailed particle breakage around the pile in coral sand", Acta Geotech., https://doi.org/10.1007/s11440-020-01089-2.
  26. Randolph, M.F., Carter, J.P. and Wroth, C.P. (1979), "Driven piles in clay-the effects of installation and subsequent consolidation", Geotechnique, 29(4), 361-393. https://doi.org/10.1680/geot.1979.29.4.361.
  27. Roscoe, K.H. and Burland, J.B. (1968), On the Generalized Stress-Strain Behavior of 'Wet Clay', Cambridge University Press.
  28. Russell, A.R. and Khalili, N. (2002), "Drained cavity expansion in sands exhibiting particle crushing", Int. J. Numer. Anal. Met., 26(4), 323-340. https://doi.org/10.1002/nag.203.
  29. Salgado, R., Mitchell, J.K. and Jamiolkowski, M. (1997), "Cavity expansion and penetration resistance in sand", J. Geotech. Geoenviron. Eng., 123(4), 344-354. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:4(344).
  30. Sekiguchi, H. and Ohta, H. (1977), "Induced anisotropy and time dependency in clays", Proceedings of the 9th ICSMFE, Tokyo, Japan, July.
  31. Silvestri, V. and Abou-Samra, G. (2012), "Analytical solution for undrained plane strain expansion of a cylindrical cavity in modified cam clay", Geomech. Eng., 4(1), 19-37. https://doi.org/10.12989/gae.2012.4.1.019.
  32. Sivasithamparam, N. and Castro, J. (2018), "Undrained expansion of a cylindrical cavity in clays with fabric anisotropy: Theoretical solution", Acta Geotech., 13(3), 729-746. https://doi.org/10.1007/s11440-017-0587-4.
  33. Vrakas, A. (2016), "A rigorous semi-analytical solution for undrained cylindrical cavity expansion in critical state soils", Int. J. Numer. Anal. Met., 40(15), 2137-2160. https://doi.org/10.1002/nag.2529.
  34. Wang, Y., Li, L., Li, J.P. and Sun, D.A. (2020), "Jet-grouting in ground improvement and rotary grouting pile installation: Theoretical analysis", Geomech. Eng., 21(3), 279-288. https://doi.org/10.12989/gae.2020.21.3.279.
  35. Wheeler, S.J., Naatanen, A., Karstunen, M. and Lojander, M. (2003), "An anisotropic elastoplastic model for soft clays", Can. Geotech. J., 40(2), 403-418. https://doi.org/10.1139/t02-119.
  36. Wroth, C.P. and Windle, D. (1975), "Analysis of the pressuremeter test allowing for volume change", Geotechnique, 25(3), 598-604. https://doi.org/10.1680/geot.1975.25.3.598.
  37. Yang, C.Y., Chen, H.H. and Li, J.P. (2020), "Drained cylindrical cavity expansion analysis in anisotropic soils considering 3D strength", Geotechnique Lett., 10(2), 346-352. https://doi.org/10.1680/jgele.19.00043.
  38. Yang, C.Y., Li, J.P., Li, L. and Sun DA. (2021a), "Expansion responses of a cylindrical cavity in overconsolidated unsaturated soils: A semi-analytical elastoplastic solution", Comput. Geotech., 130, 103922. https://doi.org/10.1016/j.compgeo.2020.103922.
  39. Yang, C.Y., Chen, H.H., Li, J.P. and Li, L. (2021b), "Undrained spherical cavity expansion in unsaturated soils: Semi-analytical solution coupling hydraulic and mechanical behaviors", Int. J. Geomech., 21(6), 04021070. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002028.
  40. Zhou, H., Kong, G.Q. and Liu, H.L. (2016), "A semi-analytical solution for cylindrical cavity expansion in elastic-perfectly plastic soil under biaxial in situ stress field", Geotechnique, 66(7), 1-12. https://doi.org/10.1680/jgeot.15.P.115.
  41. Zhou, H., Kong, G.Q., Liu, H.L. and Laloui, L. (2018), "Similarity solution for cavity expansion in thermoplastic soil", Int. J. Numer. Anal. Met., 42(2), 274-294. https://doi.org/10.1002/nag.2724.
  42. Zhou, H., Liu, H.L., Zha, Y.H. and Feng, Y. (2017), "A general semi-analytical solution for consolidation around an expanded cylindrical and spherical cavity in modified cam clay", Comput. Geotech., 91, 71-81. https://doi.org/10.1016/j.compgeo.2017.07.005.
  43. Zou, J.F. and Xia, M.Y. (2017), "A new approach for the cylindrical cavity expansion problem incorporating deformation dependent of intermediate principal stress", Geomech. Eng., 12(3), 347-360. https://doi.org/10.12989/gae.2017.12.3.347.
  44. Zou, J.F. and Zuo, S.Q. (2017), "Similarity solution for the synchronous grouting of shield tunnel under the vertical non-axisymmetric displacement boundary condition", Adv. Appl. Math. Mech., 9(1), 205-232. https://doi.org/10.4208/aamm.2016.m1479.
  45. Zou, J.F., Yang, T., Ling, W., Guo, W.J. and Huang, F.L. (2019), "A numerical stepwise approach for cavity expansion problem in strain-softening rock or soil mass", Geomech. Eng., 18(3), 225-234. http://doi.org/10.12989/gae.2019.18.3.225.

피인용 문헌

  1. Numerical modelling of the long-term effects of XCC piling in fine-grained soil vol.26, pp.1, 2021, https://doi.org/10.12989/gae.2021.26.1.027