References
- Yoo, H. J., "A Study on the Optimization of Drilling Operations(1): Optimization of Machining Variables for Drilling Operations " Journal of the Korean Institute of Industrial Engineers, Vol. 12, No. 2, pp. 337-345, 1999.
- Hwang C. W., "A Study on the Drilling Operation with Tungsten Carbide Insert Drill Tip by Statistical Analysis", A Thesis for a Master's degree, Polytechnic University, Republic of Korea.
- Oh, Y. T., Kim, G. D., and Chu, C. N., "Cutting Torque Control in Drilling - Part 2 : Drilling Torque Control Using Spindle Motor Current and Its Effect on Drill Flank Wear", Journal of the Korean Society for Precision Engineering, Vol. 18, No. 8, pp. 107-115. 2001.
- Lee, Y. C., Kwak, T. S., and Kim, G. N., Lee, J. R., "High-speed Machining Technology using CNC Machining Center Equipped with Attachment Type High-Speed Spindle", Journal of the Korean society of machine tool engineers, Vol. 11, No. 2, pp. 152-158, 2012.
- Shin, M. J., Kim, I. S., and Kim, J. H., Kim, J. S., Kim, M. K., "Hardness Machining Characteristics using the SCM415 Still", J. of Korean Soc. Manuf. Process Eng., Vol. 16, No. 2, pp. 44-49, 2017. https://doi.org/10.14775/ksmpe.2017.16.2.044
- Choi, J. G., Kim, H. S. and Kim, S. C., "A Study on the Optimum Finish Allowance for Machining Accuracy Improvement in the End Milling Processes", Journal of the Korean society of machine tool engineers, Vol. 13, No. 3, pp. 8-14, 2004.
- Chung, M. S., "A Study on Transition of Dimension Error and Surface Precision in High Speed Machining of AI-alloy", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 9, No. 3, pp. 96-102, 2000.
- Yoon, J. H., Seo, S. W., and Lee, H. C., "A Study on the Effect of Dimensional Errors and Roundness in High Speed Cylindrical Machining of Al-alloy", Journal of the Korean society of machine tool engineers, Vol. 10, No. 5, pp. 17-27, 2000.
- Kim, Y. K., "A Study on the Optimum Cutting Condition in Reamer Machining of SNCM616 Alloy Steel", A Thesis for a Master, Kyungsang National University, Republic of Korea, 2018.
- Doo, S., Hong, J. W., and Suh, N. S., "A Study on the Cutting Force and Machining Error on the Inclined Plane in Ball-end Milling", J. Korean Soc. Manuf. Process Eng., Vol. 18, No. 7, pp. 112-119, 2001.
- Kim, J. S., Choi, C. W., and Shin, M. J., "A Study on the Squareness of Circular Pocket Machining of SCM415 Steel", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 7, pp. 42-47, 2019. https://doi.org/10.14775/ksmpe.2019.18.7.042
- Choi, C. W., "A Study on Surface Roughness in Circular Pocket Machining of SCM415 Steel", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 7, pp. 77-82, 2019. https://doi.org/10.14775/ksmpe.2019.18.7.077
- Kim, M. H., "A Study on Vision Measurement System and Dynamic Signal Analysis for Improving Hole Accuracy in Drilling.", Doctorate Thesis, Jeonbuk University, Republic of Korea. 2009.
- Kahng, C. H., Ham, I., "A study on sequential quality improvement in hole-making processes." Annals of the CIRP Vol. 24, No. 1, pp. 27-32, 1975.