DOI QR코드

DOI QR Code

A Numerical Study on the Structural Stability Optimization of the Core Components of a 17cc Automotive Compressor

17cc급 자동차용 압축기 핵심부품의 구조 안정성에 관한 수치적 연구

  • Yang, Yong-Kun (School of Mechanical and Aerospace Engineering, Gyeongsang National University) ;
  • Wu, Yu-Ting (School of Mechanical and Aerospace Engineering, Gyeongsang National University) ;
  • Qin, Zhen (School of Mechanical and Aerospace Engineering, Gyeongsang National University) ;
  • Lyu, Sung-Ki (School of Mechanical and Aerospace Engineering, Gyeongsang National University)
  • 양용군 (경상대학교 기계공학부) ;
  • 우위팅 (경상대학교 기계공학부) ;
  • 진진 (경상대학교 기계공학부) ;
  • 류성기 (경상대학교 기계공학부)
  • Received : 2021.01.11
  • Accepted : 2021.01.30
  • Published : 2021.05.31

Abstract

Fuel economy has always been a major issue for the automotive industry due to environmental concerns. In particular, it is known that only 5-20% of the energy generated in a car that mainly uses an internal combustion engine is converted to increase fuel efficiency, many methods have been proposed. Among these methods, weight reduction is most commonly used because it is the simplest and cheapest. Weight is always the main reason for energy consumption, therefore, reducing weight is the best way to increase fuel efficiency while simultaneously saving on material costs. To reduce the weight of a compressor, material substitution is used. However, aluminum (a lighter metal substitute) is more fragile than steel, therefore, structural stability must be verified through testing. In this paper, we performed a 3D analysis to investigate whether aluminum can be used without compromising structural stability. Our investigation included static analysis and thermal analysis. As a result, we found that an aluminum swash plate can be safely applied on a shaft instead of steel; it reduces weight while maintaining stability that is equal to or better than steel.

Keywords

Acknowledgement

본 연구는 과학기술정보통신부 선도연구센터 기초연구사업(과제번호: NRF-2019R1A5A808320112)의 지원으로 수행되었음.

References

  1. Qin, Z., Wu, Y. T., Eizad, A., Lee, K. H. and Lyu, S. K., "Design and evaluation of two-stage planetary gearbox for special-purpose industrial machinery", Journal of Mechanical Science and Technology, Vol. 33, No. 12, pp. 5943-5950, 2019. https://doi.org/10.1007/s12206-019-1139-7
  2. Qin, Z., Wu, Y. T. and Lyu, S. K., "A Review of Recent Advances in Design Optimization of Gearbox", Journal of Precision Engineering and Manufacturing, Vol. 19, No. 11, pp. 1753-1762, 2018. https://doi.org/10.1007/s12541-018-0203-z
  3. Qin, Z., Zhang, Q., Wu, Y.T., Eizad, A. and Lyu, S. K., "Experimentally Validated Geometry Modification Simulation for Improving Noise Performance of CVT Gearbox for Vehicles", Int. International Journal of Precision Engineering and Manufacturing, Vol. 20, No. 11, pp. 1969-1977, 2019. https://doi.org/10.1007/s12541-019-00170-5
  4. Qin, Z., Son, H. I. and Lyu, S. K., "Design of anti-vibration mounting for 140A class alternator for vehicles", Journal of Mechanical Science and Technology, Vol. 32, No. 11, pp. 5233-5239, 2018. https://doi.org/10.1007/s12206-018-1021-z
  5. Bishop, I. N., "Effect of design Variables on Friction and Economy", SAE transactions, Vol. 73, pp. 812, 1964.
  6. Heywood, John. B., Internal Combustion Engine Fundamentals, New York : McGraw-Hill, pp. 712-745, 1988.