Steel and Composite Structures

  • 제39권3호
  • /
  • Pages.291-306
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A semi-analytical FE method for the 3D bending analysis of nonhomogeneous orthotropic toroidal shells

  • Wu, Chih-Ping (Department of Civil Engineering, National Cheng Kung University) ;
  • Li, En (Department of Civil Engineering, National Cheng Kung University)
  • 투고 : 2020.06.08
  • 심사 : 2021.04.15
  • 발행 : 2021.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

Based on Reissner's mixed variational theorem (RMVT), the authors develop a semi-analytical finite element (FE) method for a three-dimensional (3D) bending analysis of nonhomogeneous orthotropic, complete and incomplete toroidal shells subjected to uniformly-distributed loads. In this formulation, the toroidal shell is divided into several finite annular prisms (FAPs) with quadrilateral cross-sections, where trigonometric functions and serendipity polynomials are used to interpolate the circumferential direction and meridian-radial surface variations in the primary field variables of each individual prism, respectively. The material properties of the toroidal shell are considered to be nonhomogeneous orthotropic over the meridianradial surface, such that homogeneous isotropic toroidal shells, laminated cross-ply toroidal shells, and single- and bi-directional functionally graded toroidal shells can be included as special cases in this work. Implementation of the current FAP methods shows that their solutions converge rapidly, and the convergent FAP solutions closely agree with the 3D elasticity solutions available in the literature.

키워드

과제정보

This work was supported by the Ministry of Science and Technology of the Republic of China through Grant MOST 109-2221-E-006-015-MY3.

참고문헌

  1. Bich, D.H., Ninh, D.G., Kien, B.H. and Hui, D. (2016), "Nonlinear dynamical analyses of eccentrically stiffened functionally graded toroidal shell segments surrounded by elastic foundation in thermal environment", Compos. Part B, 95, 355-373. https://doi.org/10.1016/j.compositesb.2016.04.004.
  2. Bich, D.H., Ninh, D.G. and Thinh, T.I. (2016), "Non-linear buckling analysis of FGM toroidal shell segments filled inside by an elastic medium under external pressure loads including temperature effects", Compos. Part B, 87, 75-91. https://doi.org/10.1016/j.compositesb2015.10.021.
  3. Buchanan, G.R. and Liu, Y.J. (2005), "An analysis of the free vibration of thick-walled isotropic toroidal shells", Int. J. Mech. Sci., 47(2), 277-292. https://doi.org/10.1016/j.ijmecsci.2004.12.004.
  4. Carrera, E. (2002), "Theories and finite elements for multilayered, anisotropic, composite plates and shells", Arch. Comput. Meth. Eng., 9, 87-140. https://doi.org/10.1007/BF02736649.
  5. Carrera, E. (2003a), "Theories and finite elements for multilayered plates and shells: a unified compact formulation with numerical assessment and benchmarking", Arch. Comput. Meth. Eng., 10, 215-296. https://doi.org/10.1007/BF02736224.
  6. Carrera, E. (2003b), "Historical review of zig-zag theories for multilayered plates and shells", Appl. Mech. Rev., 56(3), 287-308. https://doi.org/10.1115/1.1557614.
  7. Carrera, E., Pagani, A. and Valvano, S. (2017), "Shell elements with through-the-thickness variable kinematics for the analysis of laminated composite and sandwich structures", Compos. Part B, 111, 294-314. https://doi.org/10.1016/j.compositesb.2016.12.001.
  8. Chan, D.Q., Nguyen, P.D., Quang, V.D., Anh, V.T.T. and Duc, N.D. (2019), "Nonlinear buckling and post-buckling of functionally graded CNTs reinforced composite truncated conical shells subjected to axial load", Steel Compos. Struct., 31(3), 243-259. https://doi.org/10.12989/scs.2019.31.3.243.
  9. Chun, C.K. and Dong, S.B. (1998), "Finite element analysis of shear deformation in laminated anisotropic shells of revolution", J. Sound Vib., 218(1), 164-176. https://doi.org/10.1006/jsvi.1998.1814.
  10. Ferreira, A.J.M., Carrera, E., Cinefra, M. and Zenkour, A.M. (2016), "A radial basis functions solution for the analysis of laminated doubly-curved shells by a Reissner-mixed variational theorem", Mech. Adv. Mater. Struct., 23(9), 1068-1079. https://dx.doi.org/10.1080/15376494.2015.1121557.
  11. Ghannad, M., Nejad, M.Z., Rahimi, G.H. and Sabouri, H. (2012), "Elastic analysis of pressurized thick truncated conical shells made of functionally graded materials", Struct. Eng. Mech., 43(1), 105-126. https://doi.org/10.12989/sem.2012.43.1.105.
  12. Jha, D.K., Kant, T. and Singh, R.K. (2013), "A critical review of recent research on functionally graded plates", Compos. Struct., 96, 833-849. http://dx.doi.org/10.1016/j.compstruct.2012.09.001.
  13. Jiang, W. and Redekop, D. (2002), "Analysis of transversely isotropic hollow toroids using the semi-analytical DQM", Struct. Eng. Mech., 13(1), 103-116. https://doi.org/10.12989/sem.2002.13.1.103.
  14. Jiang, W. and Redekop, D. (2003), "Static and vibration analysis of orthotropic toroidal shells of variable thickness by differential quadrature", Thin-Wall. Struct., 41(5), 461-478. https://doi.org/10.1016/S0263-8231(02)00116-7.
  15. Kant, T., Jha, D.K. and Singh, R.K. (2014), "A higher-order shear and normal deformation functionally graded plate model: some recent results", Acta Mech., 225, 2865-2876. https://doi.org/10.1007/s00707-014-1213-2.
  16. Khayat, M., Poorveis, D. and Moradi, S. (2017), "Buckling analysis of functionally graded truncated conical shells under external displacement-dependent pressure", Steel Compos. Struct., 23(1), 1-16. https://doi.org/ 10.12989/scs.2017.23.1.001.
  17. Khayat, M., Dehghan, S.M., Najafgholipour, M.A. and Baghlani, A. (2018), "Free vibration analysis of functionally graded cylindrical shells with different shell theories using semianalytical method", Steel Compos. Struct., 28(6), 735-748. https://doi.org/10.12989/scs.2018.28.6.735.
  18. Noor, A.K. and Peters, J.M. (1987), "Analysis of laminated anisotropic shells of revolution", J. Eng. Mech., 113(1), 49-65. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:1(49).
  19. Noor, A.K. and Peters, J.M. (1988), "Stress and vibration analyses of anisotropic shells of revolution", Int. J. Numer. Method. Eng., 26(5), 1145-1167. https:// doi.org/10.1002/nme.1620260510.
  20. Redekop, D. (1992), "A displacement solution in toroidal elasticity", Int. J. Press. Vess. Pip., 51(2), 189-209. https://doi.org/10.1016/0308-0161(92)90080-Y.
  21. Reddy, J.N. (2003), Mechanics of Laminated Composite Plates and Shells. CRC Press, New York.
  22. Sadd, M.H. (2005), Elasticity: Theory, Applications, and Numerics, New York.
  23. Shen, H.S. (2009), Functionally Graded Materials- Nonlinear Analysis of Plates and Shells, CRC Press, New York.
  24. Sobhy, M. and Zenkour, A.M. (2019), "Vibration analysis of functionally graded platelet-reinforced composite doubly-curved shallow shells on elastic foundations", Steel Compos. Struct., 33(2), 195-208. https://doi.org/10.12989/scs.2019.33.2.195.
  25. Soedel, W. (1993), Vibrations of Shells and Plates, Marcel Dekker Inc., New York.
  26. Tarn, J.Q. and Xu, R. (2019), A Course in Theory of Elasticity, Zhejiang University Press, China.
  27. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill, New York.
  28. Tornabene, F. (2009), "Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution", Comput. Method. Appl. M., 198(37-40), 2911-2935. https://doi.org/10.1016/j.cma.2009.04.011.
  29. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2014), "Free vibrations of free-form doubly-curved shells made of functionally graded materials using higher-order equivalent single layer theories", Compos. Part B, 67, 490-509. https://doi.org/10.1016/j.compositesb.2014.08.012.
  30. Tornabene, F. and Viola, E. (2009), "Free vibrations of four-parameter functionally graded parabolic panels and shells of revolution", Eur. J. Mech. A/Solids, 28(5), 991-1013. https://doi.org/10.1016/j.euromechsol.2009.04.005.
  31. Viola, E. and Tornabene, F. (2009), "Free vibration of three-parameter functionally graded parabolic panels of revolution", Mech. Res. Commun., 36(5), 587-594. https://doi.org/10.1016/j.mechrescom.2009.02.001.
  32. Wang, X.H. and Redekop, D. (2005), "Natural frequencies and mode shapes of an orthotropic thin shell of revolution", Thin-Wall. Struct., 43(5), 735-750. https://doi.org/10.1016/j.tws.2004.12.001.
  33. Wang, X.H. and Redekop, D. (2011), "Free vibration analysis of moderately-thick and thick toroidal shells", Struct. Eng. Mech., 39(4), 449-463. https://doi.org/10.12989/sem.2011.39.4.449.
  34. Wu, C.P. and Huang, H.Y. (2020), "A semi-analytical finite element method for stress and deformation analyses of bidirectional functionally graded truncated conical shells", Mech. Des. Struct. Mach., 48(4), 433-458. https://doi.org/10.1080/15397734.2019.1636657.
  35. Wu, C.P. and Jiang, R.Y. (2015), "An asymptotic meshless method for sandwich functionally graded circular hollow cylinders with various boundary conditions", J. Sandw. Struct. Mater., 17(5), 469-510. https://doi.org/10.1177/1099636215577354.
  36. Wu, C.P. and Liu, Y.C. (2016), "A review of semi-analytical numerical methods for laminated composite and multilayered functionally graded elastic/piezoelectric plates and shells", Compos. Struct., 147(1), 1-15. https://doi.org/10.1016/j.compstruct.2016.03.031.
  37. Wu, C.P. and Yu, L.T. (2018), "Quasi-3D static analysis of two-directional functionally graded circular plates", Steel Compos. Struct., 27(6), 789-801. https://doi.org/10.12989/scs.2018.27.6.789.
  38. Zenkour, A.M. (2018), "A novel mixed nonlocal elasticity theory for thermoelastic vibration of nanoplates", Compos. Struct., 185, 821-833. https://doi.org/10.1016/j.compstruct.2017.10.085.
  39. Zenkour, A.M., Hafed, Z.S. and Radwan, A.F. (2020), "Bending analysis of functionally graded nanoscale plates by using nonlocal mixed variational formula", Mathematics, 8, 1162. https://doi.org/10.3390/math8071162.
  40. Zenkour, A.M. and Radwan, A.F. (2020), "Nonlocal mixed variational formula for orthotropic nanoplates resting on elastic foundations", Eur. Phys. J. Plus, 135, 493. https://doi.org/10.1140/epjp/s13360-020-00504-7.
  41. Zhang, R.J. (1994), "Toroidal shells under nonsymmetric loading", Int. J. Solids Struct., 31(19), 2735-2750. https://doi.org/10.1016/0020-7683(94)90227-5.
  42. Zhang, F. and Redekop, D. (1992), "Surface loading of a thin-walled toroidal shell", Comput. Struct., 43(6), 1019-1028. https://doi.org/10.1016/0045-7949(92)90002-H.