Acknowledgement
본 연구는 한국지역난방공사의 지원에 의해 수행된 연구입니다. 김우철, 김경민은 2017년도 산업통상자원부의 재원으로 한국에너지기술평가원(KETEP)의 지원을 받아 연구를 수행하였습니다 (No. 2017010000190).
References
- M. Hong, H. Chae, W. C. Kim, J.-G. Kim, H. Kim, and S. Y. Lee, Failure Analysis of a Water Wall Boiler Tube for Power Generation in a District Heating System, Metals Materials International, 25, 1191 (2019). Doi: https://doi.org/10.1007/s12540-019-00267-6
- M. Hong, H. Chae, Y. Kim, M. J. Song, J. Cho, W. C. Kim, T. B. Ha, and S. Y. Lee, Flow-Accelerated Corrosion Analysis for Heat Recovery Steam Generator in District Heating System, Korean Journal of Materials Research, 29, 11 (2019). Doi: https://doi.org/10.3740/MRSK.2019.29.1.11
- Y. Kim, H. Chae, M. Hong, M. J. Song, J. Cho, S. Y. Lee, W. C. Kim, and T. B. Ha, Corrosion Failure Analysis of the Convection Part of District Heating Peak Load Boiler, Corrosion Science and Technolgy, 18, 55 (2019). Doi: https://doi.org/10.14773/cst.2019.18.2.55
- H. Lee, H. Chae, J. Cho, W. C. Kim, J. C. Jeong, H. Kim, J. G. Kim, and S. Y. Lee, Corrosion Failure Analysis of Air Vents Installed at Heat Transport Pipe in District Heating System, Corrosion Science and Technolgy, 19, 189 (2020). Doi: https://doi.org/10.14773/CST.2020.19.4.189
- J. Cho, H. Chae, H. Kim, J.-G. Kim, W. C. Kim, J. C. Jeong, and S. Y. Lee, Failure Analysis of Air Vent Connected with Heat Supply Pipeline Under Manhole, Corrosion Science and Technolgy, 19, 196 (2020). Doi: https://doi.org/10.14773/CST.2020.19.4.196
- Y. S. Kim, H. Chae, W. C. Kim, J. C. Jeong, H. Kim, J.-G. Kim, and S. Y. Lee, Failure Analysis on Localized Corrosion of Heat Transport Pipe in District Heating System, Corrosion Science and Technolgy, 19, 122 (2020). Doi: https://doi.org/10.14773/cst.2020.19.3.122
- H. Chae, H. Wang, M. Hong, W. C. Kim, J.-G. Kim, H. Kim, and S. Y. Lee, Stress Corrosion Cracking of a Copper Pipe in a Heating Water Supply System, Metals Materials International, 26, 989 (2019). Doi: https://doi.org/10.1007/s12540-019-00386-0
- H. J. Kwon, Master Thesis, Yonsei Univeristy, Seoul, (2017).
- T. Shyju, C. Saravanan, T. Senthil Kumar, and B. Kumaragurubaran, Static Analysis of Tube to Header Weld Joint Configurations, International Journal of Engineering Research & Technology, 5, 440 (2016). Doi: https://doi.org/10.17577/ijertv5is050631
- M. Karthikeyan, M. P. Jenarthanan, R. Giridharan, and S. J. Anirudh, Effects of Wall Thinning Behaviour During Pipe Bending Process-An Experimental Study, Innovative Design Analysis and Development Practices In Aerospace and Automotive Engineering (I-DAD 2018), pp. 315-324 (2019). Doi: https://doi.org/10.1007/978-981-13-2697-4_35
- H. Jin, D. Lee, S. Shin, and D. Park, A Study on Welding Distortion and Residual Stress for Tubular Welded Joint, Journal of Welding and Joining, 30, 51 (2012). Doi: https://doi.org/10.5781/KWJS.2012.30.5.445
- J. M. Pearson and R. W. Anderson, ETD: International Seminar on Cyclic Operation of Heat Recovery Steam Generators (HRSGs), (2005).
- C.-H. Chong and Jung-Il Song, Stress Behaviors of Super-heater Tubes under Load Change Operation in HRSG, Journal of the Korean Solar Energy Society, 28, 33 (2008). Doi: https://www.koreascience.or.kr/article/JAKO200819463917983.page
- B. Y. Lee, Evaluation of Stress and Fatigue Life of a Tube Bundle and Header for the High-Pressure Evaporator of a Heat Recovery Steam Generator, Transactions of the Korean Society of Mechanical Engineers - A, 42, 1087 (2018). Doi: https://doi.org/10.3795/KSME-A.2018.42.12.1087
- H. W. Jang, J.-W. Jung, and J.-W. Hong, Fatigue Fracture Analysis of Curved Pipes Under Cyclic Loading, Journal of the Computtational Structural Engineering Institute of Korea, 29, 363 (2016). Doi: https://doi.org/10.7734/COSEIK.2016.29.4.363
- Kusmono and Khasani, Analysis of a failed pipe elbow in geothermal production facility, Case Studies In Engineering Failure Analysis, 9, 71 (2017). Doi: https://doi.org/10.1016/j.csefa.2017.08.001