Acknowledgement
본 연구는 2021년도 정부(산업통상자원부)의 재원으로 해외자원개발협회의 지원(스마트 마이닝 전문 인력 양성)과 2020년도 정부(과학기술정보통신부, 환경부, 산업통상자원부)의 재원으로 한국연구재단-탄소자원화 국가전략프로젝트사업(NRF-2017M3D8A2085342)지원으로 수행되었습니다.
References
- ACI, 2005, Controlled Low-Strength Materials, ACI Committee 229, 1-15.
- ASTM, 2017, Standard Test Method for Flow Consistency of Controlled Low Strength Material(CLSM), ASTM D6103/D6103M ASTM International, West Conshohocken, PA.
- Bang, K.M. and Chon, H.T., 2004, A Study on the Ground Reinforcement against Land Subsidence in Abandoned Coal Mine Areas, Journal of the Korean Society of Mineral and Energy Resources Engineers, 41, 4, 319-326.
- Barton, N. and Choubey, V., 1977, The Shear Strength of Rock Joints in Theory and Practice, Rock Mechanics, 10, 1-54. https://doi.org/10.1007/BF01261801
- Cho, B.D., Kim, S.H. and Jeon, S.J., 2014, Assessment of Bond Characteristics between New and Old Concrete in Various Mixtures and Joint Conditions, J. of Korea Concrete Insitute, 26, 4, 507-515. https://doi.org/10.4334/JKCI.2014.26.4.507
- Dawei, H., Oriol, P. and Albert A., 2020, Bond Strength Tests under Pure Shear and Tension between Masonry and Sprayed Mortar, MDPI, Materials, 13, 2183, 1-19.
- Gratchev, I. and Kim, D.H., 2016, On the Reliability of The Strength Retention Ratio for Estimating the Strength of Weathered Rocks, Engineering Geology, 201, 1-5. https://doi.org/10.1016/j.enggeo.2015.12.005
- Helinski, M., 2007, Mechanics of Mine Backfill, PhD Thesis, Western Australia University.
- Helinski, M., Fahey, M. and Fourie, A., 2010, Behavior of Cemented Paste Backfill in Two Mine Stopes: Measurements and Modeling, J. of Geotechnical and Geoenvironmental Engineering, 137, 2, 171-182. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000418
- Itasca Consulting Group Inc., 2012, FLAC3D Manual, Version 5.0, Minneapolis, MN, USA.
- Jang, H.S., Kang, S.S. and Jang, B.A., 2014, Determination of Joint Roughness Coefficients Using Roughness Parameters, Rock Mechanics and Rock Engineering, 47, 6, 2061-2073. https://doi.org/10.1007/s00603-013-0535-z
- Kim, H.S., 2001, Experimental study on bond strength of interface between old concrete and new concrete, Daelim technical review, 12, 4-8.
- KSA, 2010, Standard Test Method for Compressive Strength of Concrete, KS F 2405, Seoul, Korea.
- KSA, 2017, Practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency, KS L 5109, Seoul, Korea.
- Kwon, M.H., Choi, S.O. and Kim, C.O, 2016, A Study on Stability Analysis of Large Underground Limestone Openings considering Excavation Damaged Zone, Tunnel and Underground Space, 26, 2, 131-142. https://doi.org/10.7474/TUS.2016.26.2.131
- Lee, S.D. and Jeon, S.W., 2017, A Study on the Roughness Measurement for Joints in Rock Mass Using LiDAR, Tunnel and Underground Space, 27, 1, 58-68. https://doi.org/10.7474/TUS.2017.27.1.058
- Liu, G., Li, L., Yang, X. and Guo, L., 2016, Numerical Analysis of Stress Distribution in Backfilled Stopes Considering Interfaces between the Backfill and Rock Walls, International Journal of Geomechanics, 17, 2, 1-9.
- Masniyom, M., 2009, Systematic Selection and Application of Backfill in Underground Mines, PhD Thesis, Technischen University Bergakademie Freiberg.
- Ministry of trade, industry and energy, 2015, 7th Basic Plan on Electricity Demand and Supply, Sejong, Korea.
- Mishra, M. and Karanam, U., 2006, Grotechnical Characterization of Fly Ash Composites for Backfilling Mine Voids, Geotech. Geol. Eng., 24, 6, 1749-1765. https://doi.org/10.1007/s10706-006-6805-8
- Moon, H.Y. and Yu, J.H., 2000, A Study on the Fundamental Properties of Mortar with Pig-iron Steel Slag Fine Aggregate, KSCE Journal of Civil Engineering, 1, 403-409.
- Muralha, J., Grasselli, G., Tatone, B., Blumel, M., Chryssanthakis, P. & Jiang, Y., 2014, ISRM Suggested Method for Laboratory Determination of the Shear Strength of Rock Joints: Revised Version, Rock Mechanics and Rock Engineering, 47, 291-302. https://doi.org/10.1007/s00603-013-0519-z
- Myers, N., 1962, Characterization of Surface Roughness, Wear, 5, 3, 182-189. https://doi.org/10.1016/0043-1648(62)90002-9
- Park, B.Y. and Kwon, S.K., 2000, Current Status of the Characterization of the Rock Joint Surface, Tunnel and Underground Space, 10, 4, 566-579.
- Sheshpari, M., 2015, A Review of Underground Mine Backfilling Methods with Emphasis on Cemented Paste Backfill, Electronic Journal of Geotechnical Engineering, 20, 13, 5183-5208.
- Sivakugan, N., Veenstra, R. and Nahuleswaran, N., 2015, Underground Mine Backfilling in Australia Using Paste Fills and Hydraulic Fills, Int. J. of Geosynth. and Ground Eng., 1, 18, 1-7.
- Tesarik, D., Seymour, J. and Yanske, T., 2009, Long-term Stability of a Backfilled Room-and-Pillar Test Section at the Buick Mine, Missouri, USA, International Journal of Rock Mechanics & Mining Sciences, 46, 1182-1196. https://doi.org/10.1016/j.ijrmms.2008.11.010
- Walske, M., 2014, An Experimental Study of Cementing Paste Backfill, PhD Thesis, Western Australia University.
- Yoo, J.C., Ji, S.W., Ahn, J.W., Kim, C.S. and Shin, H.Y., 2017, A Case Study of Mine Environmental Restoration using Coal Ash, J. of Korean Inst. of Resources Recycling, 26, 2, 80-88. https://doi.org/10.7844/KIRR.2017.26.2.80