Earthquakes and Structures

  • 제20권4호
  • /
  • Pages.431-444
  • /
  • 2021
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic behavior of reinforced concrete T-shaped columns under compression-bending-shear and torsion

  • Ping, Chen Zong (College of Civil Engineering and Architecture, Guangxi University) ;
  • Weiwei, Su (College of Civil Engineering and Architecture, Guangxi University) ;
  • Yang, Yang (College of Civil Engineering and Architecture, Guangxi University)
  • 투고 : 2021.02.05
  • 심사 : 2021.03.22
  • 발행 : 2021.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

T-shaped column is usually used as side column in buildings, which is one of the weak members in structural system. This paper presented a quasi-static cyclic loading experiment of six specimens of reinforced concrete (RC) T-shaped columns under compression-flexure-shear-torsion combined loadings to investigate the effect in the ratio of torsion to moment (T/M) and axial compression ratio (n) and height-thickness ratio of flange plate (φ) on their seismic performance. Based on the test results, the failure characteristics, hysteretic curves, ductility, energy dissipation, stiffness degradation and strength degradation were analyzed. The results show that the failure characteristics of RC T-shaped columns mainly depend on the ratio of torsion to moment, which can be divided into bending failure, bending-torsion failure and shear-torsion failure. With the increase of T/M ratio, the torsion ductility coefficient increased, and in a suitable range, the torsion and horizontal displacement ductility coefficient of RC T-shaped columns could be effectively improved with the increase of axial compression ratio and the decrease of height-thickness ratio of flange plate. Besides, the energy dissipation capacity of the specimens mainly depended on the bending and shear energy dissipation capacity. On the other hand, the increase of axial compression ratio and the ratio of torsion to moment could accelerate the torsional and bending stiffness degradation of RC T-shaped columns. Moreover, the degradation coefficient of torsion strength was between 0.80 and 0.98, and that of bending strength was between 0.75 and 1.00.

키워드

참고문헌

  1. Arabzadeh, H. and Galal, K. (2018), "Seismic-response analysis of RC C-shaped core walls subjected to combined flexure, shear, and torsion", J. Struct. Eng., 144(10), 04018165. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002181.
  2. Chen, Z.P. and Liu, X. (2018), "Seismic behavior of steel reinforced concrete cross-shaped column under combined torsion", Steel Compos. Struct., 26(4), 407-420. https://doi.org/10.12989/scs.2018.26.4.407.
  3. Chen, Z.P., Wang, N., Zhong, M., Xue, J.Y. and Su, Y.S. (2013), "Experimental study and finite element analysis on normal section bearing capacity of steel reinforced concrete special-shaped columns", J. Build. Struct., 34(10), 108-119. https://10.14006/j.jzjgxb.2013.10.013.
  4. Chen, Z.P., Xu, J.J., Chen, Y.L. and Xue, J. (2016), "Axial compression ratio limit values for steel reinforced concrete (SRC) special shaped columns", Steel Compos. Struct., 20(2), 295-316. https://doi.org/10.12989/scs.2016.20.2.295.
  5. Chen, X.D., Zhou, T., Chen, Z.H., Liu, J. and Jiang, B. (2020), "Mechanical properties of special-shaped concrete-filled steel tube columns under eccentric compression", J. Constr. Steel Res., 167, 105779. https://doi.org/10.1016/j.jcsr.2019.105779.
  6. Chen, Z.P., Ning, F., Chen, J.J., Liu, X. and Xu, D. (2021), "Test on mechanical behavior of SRC L-shaped columns under combined torsion and bending moment", Earthq. Eng. Eng. Vib., 20(1), 161-177. https://doi.org/10.1007/S11803-021-2012-0.
  7. Deng, J.D., Ma, Z.G., Liu, A.R., Cao, S. and Zhang, B. (2017), "Seismic performance of reinforced concrete bridge columns subjected to combined stresses of compression, bending, shear, and torsion", J. Brid. Eng., 22(11), 04017099. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001121.
  8. GB/T228-2002 (2002), Metallic Materials-Tensile Testing at Ambient Temperature, China Building Industry Press, Beijing, China.
  9. GB/T50081-2002 (2002), Standard for Test Method of Mechanical Properties on Ordinary Concrete, China Building Industry Press, Beijing, China.
  10. Greene, G.G. and Belarbi A. (2009), "Model for reinforced concrete members under torsion, bending, and shear. I: Theory", J. Eng. Mech., 135(9), 961-969. https://doi.org/10.1061/(ASCE)0733-9399 (2009)135:9(961).
  11. Ju, H., Han S.J. and Kim K.S. (2020), "Analytical model for torsional behavior of RC members combined with bending, shear, and axial loads", J. Build. Eng., 32(1), 101730. https://doi.org/10.1016/j.jobe.2020.101730.
  12. Li, B. and Pham, T.P. (2013), "Experimental study on the seismic response of L-shaped reinforced concrete columns", Proceedings of the Structures Congress: Bridging Your Passion with Your Profession 2013, Reston, U.S.A., May.
  13. Li, R.L., Xu, Y.F. and Bai, S.Y. (2013), "The finite element analysis of cross steel reinforced concrete special-shaped columns", Appl. Mech. Mater., 2659, 481-484. https://doi.org/10.4028/www.scientific.net/AMM.395-396.481.
  14. Mullapudi, T.R.S. and Ayoub, A. (2013), "Analysis of reinforced concrete columns subjected to combined axial, flexure, shear, and torsional loads", J. Struct. Eng., 139(4), 561-573. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000680.
  15. Nie, J.G., Wang, Y.H. and Fan, J.S. (2012), "Experimental study on seismic behavior of concrete filled steel tube columns under pure torsion and compression-torsion cyclic load", J. Constr. Steel Res., 79:115-126. https://doi.org/10.1016/j.jcsr.2012.07.029.
  16. Nie, J.G., Wang, Y.H. and Fan, J.S. (2013), "Experimental research on concrete filled steel tube columns under combined compression-bending-torsion cyclic load", Thin-Wall. Struct., 67,1-14. https://doi.org/10.1016 /j.tws.2013.01.013. https://doi.org/10.1016/j.tws.2013.01.013
  17. Pham, T.P. and Li, B. (2015), "Seismic performance assessment of L-shaped reinforced concrete columns", ACI Struct. J., 112(6), 667-678. https://doi.org/10.14359/51688053.
  18. Prakash, S., Li Q. and Belarbi A. (2012), "Behavior of circular and square reinforced concrete bridge columns under combined loading including torsion", ACI Struct. J., 109(3), 317-327.
  19. Prakash, S., Belarbi, A. and You, Y.M. (2009), "Seismic performance of circular RC columns subjected to axial force, bending, and torsion with low and moderate shear", Eng. Struct., 32(1):46-59. https://doi.org/10.1016/j.engstruct.2009.08.014.
  20. Rahal, K.N. and Collins M.P. (2003), "Combined torsion and bending in reinforced and prestressed concrete beams", ACI Struct. J., 100(2), 157-165.
  21. Rahaman, A., Anik, A.M., Kamrujjaman Serker, N.H.M. (2018), "Effect of special shaped column on lateral load resistance capacity of reinforced concrete (RC) building", Am. J. Civ. Eng., 6, 147-153. https://doi.org/10.11648/j.ajce.20180605.12.
  22. Rong, B., Feng, C.X., Zhang, R.Y., You, G. and Liu, R. (2017), "Compression-bending performance of L-shaped column composed of concrete filled square steel tubes under eccentric compression", Int. J. Steel Struct., 17(1), 325-337. https://doi.org/10.1007/s13296-016-0128-2.
  23. Shetty, S., Subrahmanya, R.M., Bhandary, S. and Shetty, T. (2019), "Comparative study on seismic performance of specially shaped RC columns with that of rectangular columns in high-rise structures", Int. J. Struct. Integr., 11(2), 202-215. https://doi.org/10.1108/IJSI-03-2019-0027.
  24. Tirasit, P. and Kawashima, K. (2007), "Seismic performance of square reinforced concrete columns under combined cyclic flexural and torsional loadings", J. Earthq. Eng., 11(3), 425-452. https://doi.org/10.1080/13632460601031813.
  25. Wu, H.P., Qiao, Q.Y., Cao, W.L., Dong, H. and Zhang, J. (2017), "Axial compressive behavior of special-shaped concrete filled tube mega column coupled with multiple cavities", Steel Compos. Struct., 23(6), 633-646. https://doi.org/10.12989/scs.2017.23.6.633.
  26. Xu, D.Q. and He, M.M. (2011), "Seismic performance analysis of the special-shaped frame column structure on multi-dimensional seismic", Appl. Mech. Mater., 1446, 1644-1648. https://doi.org/10.4028/www.scientific.net/AMM.90-93.1644.
  27. Xue, J.Y., Chen, Z.P., Zhao, H.T., Gao, L. and Liu, Z.Q. (2012), "Shear mechanism and bearing capacity calculation on steel reinforced concrete special-shaped columns", Steel Compos. Struct., 13(5), 473-487. https://doi.org/10.12989/scs.2012.13.5.473.
  28. Xue, J.Y., Hu, Z.B. and Liu, Z.Q. (2019), "Analysis on lateral-torsional vibration responses and seismic forces of a steel reinforced concrete frame structure with special-shaped columns", J. Vib. Shock, 38(14), 74-82. https://doi.org/10.13465/j.cnki.jvs.2019.14.011.
  29. Zhao, H.L., Wang, T.C., Hao, J.J. and Zhu, J. (2014), "Experimental investigation on seismic behavior of fiber reinforced exterior joints with T-shaped column", J. Build. Struct., 35(1), 51-57. https://doi.org/10.14006/j.jzjgxb.2014.s1.009.
  30. Zheng, Y.Q. and Lai, P.S. (2020), "Experimental behavior of T-shaped concrete-filled steel tubular columns under diagonal cyclic loading", J. Constr. Steel Res., 169, 106037. https://doi.org/10.1016/j.jcsr.2020.106037.
  31. Zhou, T., Chen, Z.H. and Liu, H.B. (2012), "Seismic behavior of special shaped column composed of concrete filled steel tubes", J. Constr. Steel Res., 75, 131-141. https://doi.org/10.1016/j.jcsr.2012.03.015.
  32. Zuo, Z.L., Cai, J., Yang, C., Chen, Q.J. and Sun, G. (2012), "Axial load behavior of L-shaped CFT stub columns with binding bars", Eng. Struct., 37, 88-98. https://doi.org/10.1016/j.engstruct.2011.12.042.