Advances in concrete construction

  • 제11권4호
  • /
  • Pages.347-356
  • /
  • 2021
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental comparability between steam and normal curing methods on tensile behavior of RPC

  • Guo, Min (School of Civil Engineering, Beijing Jiaotong University) ;
  • Gao, Ri (School of Civil Engineering, Beijing Jiaotong University)
  • 투고 : 2020.11.10
  • 심사 : 2021.03.26
  • 발행 : 2021.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

To address the limitation of the commonly used steam curing of reactive powder concrete (SC-RPC) in engineering, a preparation technology of normal curing reactive powder concrete (NC-RPC) is proposed. In this study, an experimental comparative research on the mechanical properties of NC-RPC and SC-RPC under uniaxial tension is conducted. Under the premise of giving full play to the ultra-high performance of RPC, the paper tries to explore whether normal curing can replace steam curing. The results show that various mechanical indexes of NC-RPC (e.g., tensile strength, ultimate tensile strain, elastic modulus and deformation performance) could basically reach the mechanical index values in steam curing at 28d age, some performance is even better at a longer age. So it affirms the feasibility of normal curing. In this paper, the influence of normal curing age on the tensile properties of RPC is discussed, and the relationship between each index and age is introduced in detail. Based on the experimental data, the tensile mechanism of RPC is analyzed theoretically, and two kinds of tensile constitutive models for RPC are proposed, one is curvilinear model, and another one is polygonal line model. The validity of the two models is further verified by the test results of others.

키워드

참고문헌

  1. Abbas, S., Nehdi, M.L. and Saleem, M.A. (2016), "Ultra-high performance concrete: mechanical performance, durability, sustainability and implementation challenges", Int. J. Concrete Struct. Mater., 10(3), 271-295. https://doi.org/10.1007/s40069-016-0157-4.
  2. AFGC, SETRA (2013), Ultra High Performance Fiber-Reinforced Concrete Recommendations, AFGC-SETRA Working Group, Bagneux, France.
  3. CECS (2009), Standard Test Methods for Fiber Reinforced Concrete, China Association for Engineering Construction Standardization, Beijing, China. (in Chinese)
  4. Chen, X., Wan, D.W., Jin, L.Z., Qian, K. and Fu, F. (2019), "Experimental studies and microstructure analysis for ultra-high-performance reactive powder concrete", Constr. Build. Mater., 229, 116924-116938. https://doi.org/10.1016/j.conbuildmat.2019.116924.
  5. Dadmand, B., Pourbaba, M., Sadaghian, H. and Mirmiran, A. (2020), "Experimental & numerical investigation of mechanical properties in steel fiber-reinforced UHPC", Adv. Concrete Constr., 26(5), 451-465. http://dx.doi.org/10.12989/cac.2020.26.5.451.
  6. Dugat, J., Roux, N. and Bernier, G. (1996), "Mechanical properties of reactive powder concretes", Mater. Struct., 29(4), 233-240. https://doi.org/10.1007/BF02485945.
  7. Erdogdu, S., Kandil, U. and Nayir, S. (2019), "Effects of cement dosage and steel fiber ratioon the mechanical properties of reactive powder concrete", Adv. Concrete Constr., 8(2), 139-144. https:// doi.org/10.12989/acc.2019.8.2.139.
  8. Graybeal, B.A. and Baby, F. (2013), "Development of direct tension test method for ultra-high-performance fiber-reinforced concrete", ACI Mater. J., 110(2), 177-186. https://doi.org/10.14359/51685532.
  9. Graybeal, B.A. and Baby, F. (2019), "Tension testing of ultra-high performance concrete", Report No. FHWA-HRT-17-053, U.S. Department of TransportationFederal Highway Administration.
  10. Ju, Y.Z., Zhou, G. and Zheng, W. (2007), "The compounding and test study of 200MPa reactive powder concrete", J. Northeast Dianli Univ. Nat. Sci. Ed., 27(2), 18-21.
  11. Li, J. (2013), "The mix proportion design and application research of RPC130", MCE Dissertation; Shijiazhuang Tiedao University, Shijiazhuang, China.
  12. Lu, D., Zhong, J., Yan, B., Gong, J., He, Z., Zhang, G. and Song, C. (2021), "Effects of curing conditions on the mechanical and microstructural properties of ultra-high-performance concrete (UHPC) incorporating iron tailing powder", Mater., 14(1), 215. https://doi.org/10.3390/ma14010215.
  13. Naaman, A.E. and Reinhardt, H.W. (2006), "Proposed classification of HPFRC composites based on their tensile response", Mater. Struct., 39, 547-555. https://doi.org/10.1617/s11527-006-9103-2.
  14. Nguyen, D.L., Ryu, G.S., Koh, K.T. and Kim, D.J. (2014), "Size and geometry dependent tensile behavior of ultra-high-performance fiber-reinforced concrete", Compos. Part B-Eng., 58, 279-292. https://doi.org/10.1016/j.compositesb.2013.10.072.
  15. Nuaklong, P., Chittanurak, J., Jongvivatsakul, P., Pansuk, W., Lenwari, A. and Likitlersuang, S. (2020), "Effect of hybrid polypropylene-steel fibres on strength characteristics of UHPFRC", Adv. Concrete Constr., 10(1), 1-11. https://doi.org/10.12989/acc.2020.10.1.001.
  16. Park, S.H., Kim, D.J., Ryu, G.S. and Koh, K.T. (2011), "Tensile behavior of ultra high performance hybrid fiber reinforced concrete", Cement Concrete Compos., 34(2), 172-184. https://doi.org/10.1016/j.cemconcomp.2011.09.009.
  17. Rong, Q., Hou, X. and Ge, C. (2020), "Quantifying curing and composition effects on compressive and tensile strength of 160-250 MPa RPC", Constr. Build. Mater., 241, 117987-117996. https://doi.org/10.1016/j.conbuildmat.2019.117987.
  18. Sadrekarimi, A. (2004), "Development of a light weight reactive powder concrete", J. Adv. Concrete Technol., 2(3), 409-417. https://doi.org/10.3151/jact.2.409.
  19. Schmidt, M. and Fehling, E. (2005), "Ultra-high-performance concrete: research, development, and application in Europe", ACI Spec. Publ., 228(4), 51-78.
  20. Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8(1), 21-31. https://doi.org/10.12989/acc.2019.8.1.021.
  21. Shi, C.J., Wu, Z.M., Xiao, J.F., Wang, D.H., Huang, Z.Y. and Fang, Z. (2015), "A review on ultra-high performance concrete: part 1. Raw materials and mixture design", Constr. Build. Mater., 101, 741-751. https://doi.org/10.1016/j.conbuildmat.2015.10.088.
  22. Smarzewski, P. (2017), "Effect of curing period on properties of steel and polypropylene fibre reinforced ultra-high performance concrete", Mater. Sci. Eng., 245, 1-7. https://doi.org/10.1088/1757-899X/245/3/032059.
  23. Wang, J.Y., Geng, L.P., Guo, J.Y., Liu, C. and Liu, G.P. (2017), "Experimental study on crack width control ability of ultra-high performance concrete", J. Harbin Inst. Technol., 49(12), 165-169. (in Chinese) https://doi.org/10.11918/j.issn.0367-6234.201705148.
  24. Wang, Y., An, M.Z., Yu, Z.R., Su, J.J. and Li, Z.G. (2013), "Research on the mechanical properties of reactive powder concrete: a review", Concrete, 12, 21-26. (in Chinese) https://doi.org/10.3969/j.issn.1002-3550.2013.12.007.
  25. Wang, Z. (2017), "Study on preparation principle and basic mechanical properties of reactive powder concrete", MCE Dissertation, Xi'an University of Architecture and Technology, Xi'an, China.
  26. Wille, K., Naaman, A.E. and Parra-Montesinos, G.J. (2011), "Ultra-high performance concrete with compressive strength exceeding 150MPa (22ksi): asimpler way", ACI Mater. J., 108(1), 46-54. https://doi.org/ 10.14359/51664215.
  27. Yan, G.J., Yan, G.P., An, M.Z. and Chen, Y.Z. (2004), "Experimental study on 200 Mpa reactive powder concrete", J. China Railway Soc., 26(2), 116-119. https://doi.org/10.3321/j.issn:1001-8360.2004.02.022
  28. Yankelevsky, D.Z. and Reinhardt, H.W. (1987), "Response of plain concrete to cyclic tension", ACI Mater. J., 84(4), 53-55. https://doi.org/10.14359/1610.
  29. Yi, T., Zhang, H., Shi, Q. and Chen, J, (2016), "State of art of mix design theory of reactive powder concrete", J. Xi'an Univ. Arch. Tech. (Nat. Sci. Ed.), 48(6), 840-845.
  30. Yoo, D.Y. and Yoon, Y.S. (2016), "A review on structural behavior, design, and application of ultra-high-performance fiber-reinforced concrete", Int. J. Concrete Struct. Mater., 10(2), 125-142. https://doi.org/10.1007/s40069-016-0143-x.
  31. Zhang, Y., Wu, B., Wang, J., Liu, M. and Zhang, X. (2019), "Reactive powder concrete mix ratio and steel fiber content optimization under different curing conditions", Mater., 12, 3615. https://doi.org/10.3390/ma12213615.
  32. Zhang, Z. (2016), "Bending behaviors of composite bridge deck system composed of OSD and reinforced UHPC layer", Ph.D. Dissertation, Hunan University, Changsha, China.
  33. Zhou, Z. and Qiao, P. (2020), "Direct tension test for characterization of tensile behavior of ultra-high performance concrete", J. Test. Eval., 48(4), 2730-2749. https://doi.org/10.1520/jte20170644.