Computers and Concrete

  • 제27권4호
  • /
  • Pages.343-353
  • /
  • 2021
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic performance improvement of RC buildings with external steel frames

  • 투고 : 2020.09.03
  • 심사 : 2021.03.16
  • 발행 : 2021.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, in order to improve the seismic performance of existing reinforced concrete (RC) framed structures, various external attachment of corner steel frame configurations was considered as a user-friendly retrofitting method. The external steel frame is designed to contribute to the lateral stiffness and load carrying capacity of the existing RC structure. A six-story building was taken into account. Four different external corner steel frame configurations were suggested in order to strengthen the building. The 3D models of the building with suggested retrofitting steel frames were developed within ABAQUS environment using solid finite elements and analyzed under horizontal loadings nonlinearly. Horizontal top displacement vs loading curves were obtained to determine the overall performance of the building. Contributions of steel and RC frames to the carried loads were computed individually. Load/capacity ratios for the ground floor columns were presented. In the study, 3D rendered images of the building with the suggested retrofits are created to better visualize the real effect of the retrofit on the final appearance of the façade of the building. The analysis results have shown that the proposed external steel frame retrofit configurations increased the lateral load carrying capacity and lateral stiffness and can be used to improve the seismic performance of RC framed buildings.

키워드

참고문헌

  1. Akin, E., Korkmaz, S.Z., Korkmaz, H.H. and Diri, E. (2016), "Rehabilitation of infilled reinforced concrete frames with thin steel plate shear walls", J. Perform. Constr. Facil., 30(4), 1-8. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000840.
  2. Altin, S., Anil, O., Kara, M.E. and Kaya, M. (2008), "An experimental study on strengthening of masonry infilled RC frames using diagonal CFRP strips", Compos. Part B: Eng., 39(4), 680-693. https://doi.org/10.1016/j.compositesb.2007.06.001.
  3. Altin, S., Kopraman, Y. and Baran, M. (2013), "Strengthening of RC walls using externally bonding of steel strips", Eng. Struct., 49, 686-695. https://doi.org/10.1016/j.engstruct.2012.12.022.
  4. Anil, O. and Altin, S. (2007), "An experimental study on reinforced concrete partially infilled frames", Eng. Struct., 29(3), 449-460. https://doi.org/10.1016/j.engstruct.2006.05.011.
  5. Arslan, M.H. and Korkmaz, H.H. (2007), "What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in Turkey?", Eng. Fail. Anal., 14(1), 1-22. https://doi.org/10.1016/j.engfailanal.2006.01.003.
  6. Chaulagain, H., Rodrigues, H., Spacone, E. and Varum, H. (2015), "Assessment of seismic strengthening solutions for existing low-rise RC buildings in Nepal", Earthq. Struct., 8(3), 511-539. http://dx.doi.org/10.12989/eas.2015.8.3.511.
  7. Cheng, S.G., Zhu, Y.X., Zhang, W.P. and Shi, T.H. (2021), "Study on the seismic performance of retrofitted RC frames with RC infill wall mega braces", Eng. Struct., 233, 111911. https://doi.org/10.1016/j.engstruct.2021.111911.
  8. Dar, A.M., Subramanian, N., Pande, S., Dar, A.R. and Raju, J. (2020), "Performance evaluation of different strengthening measures for exterior RC beam-column joints under opening moments", Struct. Eng. Mech., 74(2), 243-254. http://doi.org/10.12989/sem.2020.74.2.243.
  9. Dere, Y. (2017), "Assessing a retrofitting method for existing RC buildings with low seismic capacity in Turkey", J. Perform. Constr. Facil., 31(2), 1-17. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000969.
  10. Ecemis, A.S. (2018), "Lateral rigidity improvement of deficient reinforced concrete structures with the use of user friendly systems", Ph.D. Dissertation, Konya Technical University, Turkey.
  11. Gorgulu, T., Tama, Y.S., Yilmaz, S. and Kaplan, H. (2012), "Strengthening of reinforced concrete structures with external steel shear walls", J. Constr. Steel Res., 70, 226-235. https://doi.org/10.1016/j.jcsr.2011.08.010.
  12. Gunaselvi, S., Indumathy, M. and Sivasankar, S. (2020), "Experimental assessment of RC beam-column connections with internal and external strengthening techniques", Mater. Today: Proc., 27(2), 1210-1217. https://doi.org/10.1016/j.matpr.2020.02.114.
  13. Hassanin, A.I., Shabaan, H.F. and Elsheikh, A.I. (2021), "Cyclic loading behavior on strengthened composite beams using external post-tensioning tendons (experimental study)", Struct., 29, 1119-1136. https://doi.org/10.1016/j.istruc.2020.12.017.
  14. Iban, M.C. (2020), "Lessons from approaches to informal housing and non-compliant development in Turkey: An in-depth policy analysis with a historical framework", Land Use Policy, 99, 105104. https://doi.org/10.1016/j.landusepol.2020.105104.
  15. Karki, P., Oinam, R.M. and Sahoo, D.R. (2020), "Evaluation of seismic strengthening techniques for non-ductile soft-story RC frame", Adv. Concrete Constr., 9(4), 423-435. https://doi.org/10.12989/acc.2020.9.4.423.
  16. Khalaf, M.R. and Al-Ahmed, A.H.A. (2020), "Shear strength of reinforced concrete deep beams with large openings strengthened by external prestressed strands", Struct., 28, 1060-1076. https://doi.org/10.1016/j.istruc.2020.09.052.
  17. Korkmaz, H.H. and Ecemis, S. (2017), "Seismic upgrading of reinforced concrete frames with steel plate shearwalls", Earthq. Struct., 13, 473-484. https://doi.org/10.12989/eas.2017.13.5.473.
  18. Korkmaz, H.H., Yakut, A. and Bayraktar, A. (2019), "Analysis of a multi-story reinforced concrete residential building damaged under its self-weight", Eng. Fail. Anal., 98, 38-48. https://doi.org/10.1016/j.engfailanal.2019.01.043.
  19. Korkmaz, S.Z. (2015), "Observations on the van earthquake and structural failures", J. Perform. Constr. Facil., 29(1), 1-25. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000456.
  20. Kota, S.K., Rama, J.S.K. and Murthy, A.R. (2019), "Strengthening RC frames subjected to lateral load with ultra high-performance fiber reinforced concrete using damage plasticity model", Earthq. Struct., 72(6), 221-232. http://dx.doi.org/10.12989/eas.2019.17.2.221.
  21. Marthlong, C. (2019), "Rehabilitation and strengthening of exterior RC beam column connections using epoxy resin injection and FRP sheet wrapping: Experimental study", Struct. Eng. Mech., 72(6), 723-736. http://dx.doi.org/10.12989/sem.2019.72.6.723.
  22. Ozcelik, R. (2011), "Seismic upgrading of reinforced concrete frames with structural steel elements", Ph.D. Dissertation, Middle East Technical University, Turkey.
  23. Ozturk, M. (2015), "Field reconnaissance of the October 23, 2011, Van, Turkey earthquake: Lessons from structural damages", J. Perform. Constr. Facil., 30(5), 1-15. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000532.
  24. Rizwan, M., Ahmad, N. and Khan, A.N. (2020), "Seismic performance assessment of reinforced concrete moment resisting frame with low strength concrete", Struct., 30, 1140-1160. https://doi.org/10.1016/j.istruc.2020.10.038.
  25. Sezen, H., Whittaker, A.S., Elwood, K.J. and Mosalam, K.M. (2003), "Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey", Eng. Struct., 25(1), 103-114. https://doi.org/10.1016/S0141-0296(02)00121-9.
  26. Smyrou, E. (2015), "FRP versus traditional strengthening on a typical mid-rise Turkish RC building", Earthq. Struct., 9(5), 1069-1089. http://dx.doi.org/10.12989/eas.2015.9.5.1069.
  27. TBEC (2018), Turkish Building Earthquake Code, Disaster and Emergency Management Presidency, Turkey.
  28. Toker, S. and Unay, A.I. (2006), "Re-characterization of architectural style of reinforced concrete building facades by exterior seismic strengthening", Build. Environ., 41(12), 1952-1960. https://doi.org/10.1016/j.buildenv.2005.07.005.
  29. Yakut, A., Gulkan, P., Bakir, S.B. and Yilmaz, M.T. (2005), "Reexamination of damage distribution in Adapazari: Structural considerations", Eng. Struct., 27(7), 990-1001. https://doi.org/10.1016/j.engstruct.2005.02.001.
  30. Yesilyurt, A., Zulfikar, A.C. and Tuzun, C. (2021), "Seismic vulnerability assessment of precast RC industrial buildings in Turkey", Soil Dyn. Earthq. Eng., 141, 106539. https://doi.org/10.1016/j.soildyn.2020.106539.