DOI QR코드

DOI QR Code

Mechanical properties and microstructures of stabilised dredged expansive soil from coal mine

  • Chompoorat, Thanakorn (Department of Civil Engineering, School of Engineering, University of Phayao) ;
  • Likitlersuang, Suched (Centre of Excellence in Geotechnical and Geoenvironmental Engineering, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Sitthiawiruth, Suwijuck (Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Komolvilas, Veerayut (Centre of Excellence in Geotechnical and Geoenvironmental Engineering, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Jamsawang, Pitthaya (Soil Engineering Research Center, Department of Civil Engineering, King Mongkut's University of Technology North Bangkok) ;
  • Jongpradist, Pornkasem (Department of Civil Engineering, Faculty of Engineering, King Mongkut's University of Technology Thonburi)
  • Received : 2021.01.26
  • Accepted : 2021.04.06
  • Published : 2021.04.25

Abstract

Expansive soil is the most predominant geologic hazard which shows a large amount of shrinkage and swelling with changes in their moisture content. This study investigates the macro-mechanical and micro-structural behaviours of dredged natural expansive clay from coal mining treated with ordinary Portland cement or hydrated lime addition. The stabilised expansive soil aims for possible reuse as pavement materials. Mechanical testing determined geotechnical engineering properties, including free swelling potential, California bearing ratio, unconfined compressive strength, resilient modulus, and shear wave velocity. The microstructures of treated soils are observed by scanning electron microscopy, x-ray diffraction, and energy dispersive spectroscopy to understand the behaviour of the expansive clay blended with cement and lime. Test results confirmed that cement and lime are effective agents for improving the swelling behaviour and other engineering properties of natural expansive clay. In general, chemical treatments reduce the swelling and increase the strength and modulus of expansive clay, subjected to chemical content and curing time. Scanning electron microscopy analysis can observe the increase in formation of particle clusters with curing period, and x-ray diffraction patterns display hydration and pozzolanic products from chemical particles. The correlations of mechanical properties and microstructures for chemical stabilised expansive clay are recommended.

Keywords

References

  1. AASHTO (2017), "Standard method of test for determining the resilient modulus of soils and aggregate materials", American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C., U.S.A.
  2. Al-Bared, M.A., Harahap, I.S., Marto, A., Mohamad, H., Abad, S.V.A.N.K. and Mustaffa, Z. (2020), "Cyclic behavior of RT-cement treated marine clay subjected to low and high loading frequencies", Geomech. Eng., 21(5), 433-445. http://doi.org/10.12989/gae.2020.21.5.433.
  3. Al-Mukhtar, M., Khattab, S. and Alcover, J. (2012), "Microstructure and geotechnical properties of lime-treated expansive clayey soil Muzahim", Eng. Geol., 139-140, 17-27. https://doi.org/10.1016/j.enggeo.2012.04.004.
  4. Al-Rawas, A.A. and McGown, A. (1999), "Microstructure of Omani expansive soils", Can. Geotech. J., 36(2), 272-290. https://doi.org/10.1139/t98-111.
  5. Alrubaye, A.J., Hasan, M. and Fattah, M.Y. (2018), "Effects of using silica fume and lime in the treatment of kaolin soft clay", Geomech. Eng., 14(3), 247-255. http://doi.org/10.12989/gae.2018.14.3.247.
  6. Al-Taie, A.Y., Disfani, M.M., Evans, R.P., Arulrajah, A. and Horpibulsuk, S. (2015), "Determination of optimum lime content for volcanic expansive clays", Fund. Appl. Geotech., 1623-1630. https://doi.org/10.3233/978-1-61499-603-3-1623.
  7. Arabi, M. and Wild, S. (1986), "Microstructural development in cured soil-lime composites", J. Mater. Sci., 21(2), 497-503. https://doi.org/10.1007/BF01145514.
  8. ASTM (1999), Standard test method for using pH to estimate the soil-lime proportion requirement for soil stabilization, ASTM D6276, ASTM International, Philadelphia, U.S.A.
  9. ASTM (2003), Standard test methods for one-dimensional swell or swell settlement potential of cohesive soils, ASTM D4546, ASTM International, Philadelphia, U.S.A.
  10. ASTM (2012), Standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ft3(2700 kN-m/㎥)), ASTM D 1557, ASTM International, Philadelphia, U.S.A.
  11. ASTM (2016a), Standard test method for California bearing ratio (CBR) of laboratory-compacted soils, ASTM D 1883, ASTM International, Philadelphia, U.S.A.
  12. ASTM (2016b), Standard test method for unconfined compressive strength of cohesive soil, ASTM D 2166/D 2166M, ASTM International, Philadelphia, U.S.A.
  13. ASTM (2016c), Standard test method for pulse velocity through concrete, ASTM C597-16, ASTM International, Philadelphia, U.S.A.
  14. Austroads (2017), Guide to Pavement Technology Part 2: Pavement Structural Design, Austroads, Sydney, Australia.
  15. Avsar, E., Ulusay, R. and Sonmez, H. (2009), "Assessments of swelling anisotropy of Ankara clay", Eng. Geol., 105(1-2), 24-31. https://doi.org/10.1016/j.enggeo.2008.12.012.
  16. Azam, S. and Wilson, G.W. (2006), "Volume change behavior of a fissured expansive clay containing anhydrous calcium sulfate", Proceedings of the 4th International Conference on Unsaturated Soils, Carefree, Arizona, U.S.A., April.
  17. Bell, F.G. (1996) "Lime stabilization of clay minerals and soils", Eng. Geol., 42(4), 223-237. https://doi.org/10.1016/0013-7952(96)00028-2.
  18. Bilondi, M.P., Toufigh, M.M. and Toufigh, V. (2018), "Experimental investigation of using a recycled glass powder-based geopolymer to improve the mechanical behavior of clay soils", Constr. Build. Mater., 170, 302-313. https://doi.org/10.1016/j.conbuildmat.2018.03.049.
  19. Boardman, D.I., Glendinning, S. and Rogers, C.D.F. (2001), "Development of stabilization and solidification in lime-clay mixes", Geotechnique, 51(6), 533-543. https://doi.org/10.1680/geot.2001.51.6.533.
  20. Bozbey, I., Kelesoglu, M.K., Oztoprak, S., Komut, M., Comez, S., Ozturk, T., Mert, A. and Ocal, K. (2021), "Effects of soaking on a lime stabilized clay and implications for pavement design", Geomech. Eng., 24(2), 115-127. http://doi.org/10.12989/gae.2021.24.2.115.
  21. Brandl, H. (1981), "Alteration of soil parameters by stabilization with lime", Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Sweden, June.
  22. Cherian, C. and Arnepalli, D.N. (2015), "A critical appraisal of the role of clay mineralogy in lime stabilization", Int. J. Geosynth. Ground Eng., 1(8), 1-20. https://doi.org/10.1007/s40891-015-0009-3.
  23. Chhun, K.T., Choo, H., Kaothon, P. and Yune, C.Y. (2020), "Experimental study on the strength behavior of cement-stabilized sand with recovered carbon black", Geomech. Eng., 23(1), 31-38. http://doi.org/10.12989/gae.2020.23.1.031.
  24. Chompoorat, T. and Likitlersuang, S. (2016), "Assessment of shrinkage characteristic in blended cement and fly ash admixed soft clay", Proceedings of the 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, Kyushu, Japan, November. https://doi.org/10.3208/jgssp.THA-01.
  25. Chompoorat, T., Likitlersuang, S. and Jongvivatsakul, P. (2018), "The performance of controlled low-strength material base supporting a high-volume asphalt pavement", KSCE J. Civ. Eng., 22(6), 2055-2063. https://doi.org/10.1007/s12205-018-1527-z.
  26. Chompoorat, T., Maikhun, T. and Likitlersuang, S. (2019a), "Cement improved lake bed sedimentary soil for road construction", Proc. Inst. Civ. Eng. Ground Improv., 172(3), 192-201. https://doi.org/10.1680/jgrim.18.00076.
  27. Chompoorat, T., Likitlersuang, S. and Jongvivatsakul, P. (2019b), "Engineering properties of controlled low-strength material (CLSM) as an alternative fill material", Proceedings of the 16th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (16ARC), Taipei, Taiwan, October.
  28. Chompoorat, T., Thanawong, K. and Likitlersuang, S. (2021), "Swell-shrink behaviour of cement with fly ash-stabilised lakebed sediment", B. Eng. Geol. Environ., 80, 2617-2628. https://doi.org/10.1007/s10064-020-02069-2.
  29. Croft, J.B. (1967), "The influence of soil mineralogical composition on cement stabilization", Geotechnique, 17(2), 119-135. https://doi.org/10.1680/geot.1967.17.2.119.
  30. Diamond, S. and Kinter, E.B. (1965), "Mechanisms of soil-lime stabilization", Highway Res. Rec., 92, 83-102.
  31. Eades, J.L. and Grim, R.E. (1966), "A quick test to determine lime requirements for lime stabilization", Highway Res. Rec., 139, 61-72.
  32. Fatahi, B., Fatahi, B., Le, T.M. and Khabbaz, H. (2013), "Small-strain properties of soft clay treated with fibre and cement", Geosynth. Int., 20(4), 286-300. https://doi.org/10.1680/gein.13.00018.
  33. Freitas, J.B., Rezende, L.R. and Gitirana Jr., G.F.N. (2020), "Prediction of the resilient modulus of two tropical subgrade soils considering unsaturated conditions", Eng. Geol., 270, 5. https://doi.org/10.1016/j.enggeo.2020.105580.
  34. Ghiyas, S.M.R. and Bagheripour, M.H. (2020), "Stabilization of oily contaminated clay soils using new materials: Micro and macro structural investigation", Geomech. Eng., 20(3), 207-220. http://doi.org/10.12989/gae.2020.20.3.207.
  35. Ghose, A. and Subbarao, C. (2007), "Strength characteristics of class F fly ash modified with lime and gypsum", J. Geotech. Geoenviron. Eng., 133(7), 757-766. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:7(757).
  36. Guidobaldia, G., Cambi, C., Cecconi, M., Deneele, D., Paris, M., Russo, G. and Vitale, E. (2017), "Multi-scale analysis of the mechanical improvement induced by lime addition on a pyroclastic soil", Eng. Geol., 221, 193-201. https://doi.org/10.1016/j.enggeo.2017.03.012.
  37. Horpibulsuk, S., Rachan, R., Raksachon, Y., Suddepong, A. and Chinkulkijniwat, A. (2010), "Analysis of strength development in cement-stabilised silty clay based on microstructural considerations", Constr. Build. Mater., 24(10), 2011-2021. https://doi.org/10.1016/j.conbuildmat.2010.03.011.
  38. Horpibulsuk, S., Rachan, R. and Suddeepong, A. (2011), "Assessment of strength development in blended cement admixed Bangkok clay", Constr. Build. Mater., 25(4), 1521-1531. https://doi.org/10.1016/j.conbuildmat.2010.08.006.
  39. Horpibulsuk, S., Phojan, W., Suddeepong, A., Chinkulkijniwat, A. and Liu, M.D. (2012), "Strength development in blended cement admixed saline clay", Appl. Clay Sci., 55, 44-52. https://doi.org/10.1016/j.clay.2011.10.003.
  40. Jamsawang, P., Nuansrithongb, N., Voottipruexc, P., Songpiriyakijd, S. and Jongpradiste, P. (2017), "Laboratory investigations on the swelling behavior of composite expansive clays stabilised with shallow and deep clay-cement mixing methods", Appl. Clay Sci., 148, 83-94. https://doi.org/10.1016/j.clay.2017.08.013.
  41. Jiang, H., Wang, B., Inyang, H.I., Liu, J., Gu, K. and Shi, B. (2013), "Role of expansive soil and topography on slope failure and its countermeasures, Yun county, China", Eng. Geol., 152, 155-161. https://doi.org/10.1016/j.enggeo.2012.10.020.
  42. Jiang, M., Li, T., Cui, Y. and Zhu, H. (2017), "Mechanical behavior of artificially cemented clay with open structure: Cell and physical model analyses", Eng. Geol., 221, 133-142. https://doi.org/10.1016/j.enggeo.2017.03.002.
  43. Julphunthong, P., Thongdetsri, T. and Chompoorat, T. (2018), "Stabilisation of soft Bangkok clay using Portland cement and calcium sulfoaluminate-belite cement", Key Eng. Mater., 775, 582-588. https://doi.org/10.4028/www.scientific.net/KEM.775.582.
  44. Khan, M.S., Hossain, S., Ahmed, A. and Faysal, M. (2017), "Investigation of a shallow slope failure on expansive clay in Texas", Eng. Geol., 219, 118-129. https://doi.org/10.1016/j.enggeo.2016.10.004.
  45. Khattab, S.A., Al-Mukhtar, M. and Fleureau, J.M. (2007), "Long-term stability characteristics of a lime-treated plastic soil", J. Mater. Civ. Eng., 19(4), 358-366. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:4(358).
  46. Komin, H. and Ogata, N. (1996), "Prediction for swelling characteristics of compacted bentonite", Can. Geotech. J., 33(1), 11-22. https://doi.org/10.1139/t96-021.
  47. Locat, J., Berube, M.A. and Choquett, M. (1990), "Laboratory investigations on the lime stabilization of sensitive clays: Shear strength development", Can. Geotech. J., 27(3), 294-304. https://doi.org/10.1139/t90-040.
  48. Mase, L.Z., Likitlersuang, S. and Tobita, T. (2019), "Cyclic behavior and liquefaction resistance of Izumio sands in Osaka, Japan", Mar. Georesour. Geotec., 37(7), 765-774. https://doi.org/10.1080/1064119X.2018.1485793.
  49. Mutaz, E. and Dafalla, M. (2014), "Utilizing chemical treatment in improving bearing capacity of highly expansive clays", Proceedings of the Geo-Hubei 2014 International Conference on Sustainable Civil Infrastructure, Hubei, China, July. https://doi.org/10.1061/9780784478486.010.
  50. Nelson, J.D. and Miller, J.D. (1997), Expansive Soils: Problems and Practice in Foundation and Pavement Engineering, John Wiley and Sons, New York, U.S.A.
  51. Nicholson, P.G. (2015), Soil Improvement and Ground Modification Methods, Butterworth-Heinemann, Waltham, U.S.A.
  52. Osinubi, K.J. (2000), "Stabilization of tropical black clay with cement and pulverized coal bottom ash admixture", Adv. Unsatur. Geotech., 2000, 289-302. https://doi.org/10.1061/40510(287)20.
  53. Phanikumar, B.R. (2009), "Effect of lime and fly ash on swell, consolidation and shear strength characteristics of expansive clays: A comparative study", Geomech. Geoeng., 4(2), 175-181. https://doi.org/10.1080/17486020902856983.
  54. Por, S., Likitlersuang, S. and Nishimura, S. (2015), "Investigation of shrinkage and swelling behavior of expansive/non-expansive clay mixtures", Geotech. Eng., 46(1), 117-127.
  55. Por, S., Nishimura S. and Likitlersuang, S. (2017), "Deformation characteristics and stress responses of cement-treated expansive clay under confined one-dimensional swelling", Appl. Clay Sci., 146, 316-324. https://doi.org/10.1016/j.clay.2017.06.022.
  56. Puppala, A.J., Balakrishna, K. and Hoyos, L.R. (2004), "Volumetric shrinkage strain measurements in expansive soils using digital imaging technology", Geotech. Test. J., 27(6), 547-556. https://doi.org/10.1520/GTJ12069.
  57. Rao, S.M. and Shivananda, P. (2005), "Compressibility behavior of lime-stabilised clay", Geotech. Geol. Eng., 23, 309-319. https://doi.org/10.1007/s10706-004-1608-2.
  58. Seed, H.B., Woodward, R.J. and Lundgren, R. (1962), "Prediction of swelling potential for compacted clays", J. Soil Mech. Found. Div., 88(3), 53-87. https://doi.org/10.1061/TACEAT.0008724.
  59. Sharma, N.K., Swain, S.K. and Sahoo, U.C. (2012), "Stabilization of a clayey soil with fly ash and lime: A micro level investigation", Geotech. Geol. Eng., 30(5), 1197-1205. https://doi.org/10.1007/s10706-012-9532-3.
  60. Sivapullaiah, P.V., Sridharan, A. and Ramesh, H.N. (2000), "Strength behavior of lime treated soils in the presence of sulphate", Can. Geotech. J., 37(6), 1358-1367. https://doi.org/10.1139/t00-052.
  61. Souza, R.F.C. and Pejon, O.J. (2020), "Pore size distribution and swelling behavior of compacted bentonite/claystone and bentonite/sand mixtures", Eng. Geol., 275, 20. https://doi.org/10.1016/j.enggeo.2020.105738.
  62. Sun, H., Weng, Z., Liu, S., Geng, X., Pan, X., Cai, Y. and Shi, L. (2020), "Compression and consolidation behaviors of lime-treated dredging slurry under vacuum pressure", Eng. Geol., 270, 5. https://doi.org/10.1016/j.enggeo.2020.105573.
  63. Tastan, E.O., Edil, T.B., Benson, C.H. and Aydilek, A.H. (2011), "Stabilization of organic soils with fly ash", J. Geotech. Geoenviron. Eng., 137(9), 819-833. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000502.
  64. Thay, S., Likitlersuang, S. and Pipatpongsa, T. (2013), "Monotonic and cyclic behavior of Chiang Mai sand under simple shear mode", Geotech. Geol. Eng., 31(1), 67-82. https://doi.org/10.1007/s10706-012-9563-9.
  65. Thomas, G. and Rangaswamy, K. (2020), "Strengthening of cement blended soft clay with nano-silica particles", Geomech. Eng., 20(6), 505-516. http://doi.org/10.12989/gae.2020.20.6.505.
  66. Turkoz, M. (2019), "Delayed compaction effect on the strength and dynamic properties of clay treated with lime", Geomech. Eng., 18(5), 471-480. http://doi.org/10.12989/gae.2019.18.5.471.
  67. Verastegui-Flores, R.D., Di Emidio, G. and Van Impe, W.F. (2010), "Small-strain shear modulus and strength increase of cement-treated clay", Geotech. Test. J., 33(1), 62-71. https://doi.org/10.1520/GTJ102354.
  68. Wayne, A.C., Osman, M.A. and Ali, E.M. (1984), "Construction on expansive soil in Sudan", J. Constr. Eng. Manag., 110(3), 359-374. https://doi.org/10.1061/(ASCE)0733-364(1984)110:3(359).
  69. Wei, L., Xu, Q., Wang, S., Wang, C. and Chen, J. (2019), "Development of transparent cemented soil for geotechnical laboratory modelling", Eng. Geol., 262, 28. https://doi.org/10.1016/j.enggeo.2019.105354.
  70. Yoobanpot, N., Jamsawang, P. and Horpibulsuk, S. (2017), "Strength behavior and micro- structural characteristics of soft clay stabilised with cement kiln dust and fly ash residue", Appl. Clay Sci., 141, 146-156. https://doi.org/10.1016/j.clay.2017.02.028.
  71. Yoobanpot, N., Jamsawang, P., Poorahong, H., Jongpradist, P. and Likitlersuang, S. (2020), "Multiscale laboratory investigation of the mechanical and microstructural properties of dredged sediments stabilized with cement and fly ash", Eng. Geol., 267, 20. https://doi.org/10.1016/j.enggeo.2020.105491.
  72. Zaimoglu, A.S., Tan, O. and Akbulut, R.K. (2015), "Optimization of consistency limits and plasticity index of fine-grained soils modified with polypropylene fibers and additive materials", KSCE J. Civ. Eng., 20(2), 662-669. https://doi.org/10.1007/s12205-015-0540-8.

Cited by

  1. Use of Microbially Induced Calcite Precipitation for Soil Improvement in Compacted Clays vol.7, pp.4, 2021, https://doi.org/10.1007/s40891-021-00327-1
  2. Solidification of Sediments Deposited in Reservoirs with Cement and Fly Ash for Road Construction vol.7, pp.4, 2021, https://doi.org/10.1007/s40891-021-00328-0