DOI QR코드

DOI QR Code

Power Interruption Cost Calculation based on Value-based Methodology

가치평가법을 사용한 정전관련비용의 산정

  • Lee, Buhm (Dept. of Electrical and Semiconductor Eng. Chonnam National Univ.) ;
  • Kim, Kyoung-Min (Dept. of Electrical and Semiconductor Eng. Chonnam National Univ.) ;
  • Choi, Nam-Sup (Dept. of Electrical and Semiconductor Eng. Chonnam National Univ.)
  • 이범 (전남대학교 전기및반도체공학과) ;
  • 김경민 (전남대학교 전기및반도체공학과) ;
  • 최남섭 (전남대학교 전기및반도체공학과)
  • Received : 2021.02.26
  • Accepted : 2021.04.17
  • Published : 2021.04.30

Abstract

This study presents a Power Quality(:PQ) costs calculation methodology based on Value-Based Methodology. A SCDF including Voltage Sag Costs is presented to calculate Sustained Interruption Costs, Momentary Interruption Costs, and Voltage Sags Costs. Authors compared between interruption costs without Back-Up Power Supply and interruption costs with Back-Up Power Supply, and showed reduction of interruption costs by investing Back-UP Power Supply by multi-lateral analyzation. By applying this method to the real system, evaluated and analyzed power quality of the system.

본 연구에서는 SCDF를 사용하여 전력공급의 가치를 산정하고, 부하점별 중요도를 다면적인 평가를 하는 방법을 제시한다. 이의 방법으로 지속정전, 순간정전, 전압 Sag/Swell에 대응할 수 있는 SCDF를 제공하고, 이 SCDF를 사용하여 정전과 관련하여 어느 부하점에 어느 정도의 비용이 발생하는지를 계산하였으며, 이들 비용을 다면평가를 통해 어느 부분이 어느정도 취약한지를 평가하고 어느 부분의 확장이 필요한 지를 수치적으로 설명할 수 있도록 하였다. 본 연구를 우리나라의 실배전계통에 적용하여 평가하고 유용성을 검증하였다.

Keywords

References

  1. IEEE, "IEEE Guide for Electric Power Distribution Reliability Indices, IEEE Std. 1366", Institute of Electrical and Electronics Engineers, 2001.
  2. M. Bollen, D. Sabin, and R. Thallam, Voltage-Sag Indices - Recent Developments in IEEE P1564 Task Force, CIGRE/IEEE PES International Symposium Quality and Security of Electric Power Delivery Systems, Montreal, QC, Canada, 2003, pp. 34-41.
  3. R. Billinton and R. Allan, "Reliability Evaluation of Power Systems", New York, Springer, 1984.
  4. R. Billinton and P. Wang, "Distribution System Reliability Cost/Worth Analysis Using Analytical and Sequential Simulation Techniques," IEEE Trans. Power Systems, vol. 13, no. 4, 1998, pp. 1245-1250. https://doi.org/10.1109/59.736248
  5. IEEE, "IEEE Recommended Practice for Monitoring Electric Power Quality, IEEE Std. 1159", Institute of Electrical and Electronics Engineers, 1995.
  6. IEEE, "IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems, IEEE Std. 519", Institute of Electrical and Electronics Engineers, 1992.
  7. C. Park, S. Choi, and C. Huh, "Assessment of Interruption Costs for Residential Customers," Journal of the the Korean Institute of Illuminating and Electrical Installation Engineerss, vol. 18, no.4, 2004, pp. 131-137. https://doi.org/10.5207/JIEIE.2004.18.4.131
  8. Y. Bin, W. Xiu-Li, B. Zhao-Hong, and W. Xi-fan, "Distribution Network Recon- figuration for Reliability Worth Enhancement," Institute of Electrical and Electronics Engineers, 2002, pp. 2547-2550.
  9. P. Heine, P. Pohjanheimo, M. Lehtonen, and E. Lakervi, "A Method for Estimating the Frequency and Cost of Voltage Sags," IEEE Trans. Power Systems, vol. 17, no. 2, 2002, pp. 290-296. https://doi.org/10.1109/TPWRS.2002.1007895
  10. K. Song, Y. Kim, and Y. Bae, "Study on Multi Parameter Measurement and Analysis of Distribution High Voltage Cable Connection Part," J. of the Korea Institute of Electronic Communication Sciences, vol. 16, no. 1, 2021, pp. 53-60. https://doi.org/10.13067/JKIECS.2021.16.1.53
  11. J. Joo, J. Oh, Y. Lee, and K. Park, "ESS Optimization and Stable Operation for Battery Level Calculation and Failure Prediction Algorithm," J. of the Korea Institute of Electronic Communication Sciences, vol. 15, no. 1, 2020, pp. 71-78. https://doi.org/10.13067/JKIECS.2020.15.1.71