과제정보
The authors thank the researchers of the Advanced Dental Device Development Institute, Kyungpook National University, for their time and contributions to the study. This work was supported by the Industrial Strategic Technology Development Program (10062635, New hybrid milling machine with a resolution of less than 10 ㎛ development, using open CAD/CAM S/W integrated platforms for oneday prosthetic treatment of 3D smart medical care system) funded by the Ministry of Trade, Industry and Energy (MOTIE, Korea). This research was conducted under the industrial infrastructure program of laser industry support, which is funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea, N0000598).
참고문헌
- Jain PK, Jain PK. Use of 3D printing for home applications: a new generation concept. Mater Today Proc. 2021; 43: 605-7. https://doi.org/10.1016/j.matpr.2020.12.145
- Soltanzadeh P, Su JM, Habibabadi SR, Kattadiyil MT. Obturator fabrication incorporating computer-aided design and 3-dimensional printing technology: a clinical report. J Prosthet Dent. 2019; 121: 694-7. https://doi.org/10.1016/j.prosdent.2018.06.019
- Schonhoff LM, Mayinger F, Eichberger M, Losch A, Reznikova E, Stawarczyk B. Three-dimensionally printed and milled polyphenylene sulfone materials in dentistry: tensile bond strength to veneering composite resin and surface properties after different pretreatments. J Prosthet Dent. 2021. doi: 10.1016/j.prosdent.2020.12.042. [Epub ahead of print]
- Angwarawong T, Reeponmaha T, Angwaravong O. Influence of thermomechanical aging on marginal gap of CAD-CAM and conventional interim restorations. J Prosthet Dent. 2020; 124: 566.e1-6. https://doi.org/10.1016/j.prosdent.2020.03.036
- Revilla-Leon M, Umorin M, Ozcan M, Piedra-Cascon W. Color dimensions of additive manufactured interim restorative dental material. J Prosthet Dent. 2020; 123: 754-60. https://doi.org/10.1016/j.prosdent.2019.06.001
- Peng CC, Chung KH, Yau HT, Ramos V Jr. Assessment of the internal fit and marginal integrity of interim crowns made by different manufacturing methods. J Prosthet Dent. 2020; 123: 514-22. https://doi.org/10.1016/j.prosdent.2019.02.024
- Cheng CW, Ye SY, Chien CH, Chen CJ, Papaspyridakos P, Ko CC. Randomized clinical trial of a conventional and a digital workflow for the fabrication of interim crowns: an evaluation of treatment efficiency, fit, and the effect of clinician experience. J Prosthet Dent. 2021; 125: 73-81. https://doi.org/10.1016/j.prosdent.2019.08.006
- Kim YH, Jung BY, Han SS, Woo CW. Accuracy evaluation of 3D printed interim prosthesis fabrication using a CBCT scanning based digital model. PLoS One. 2020; 15: e0240508. https://doi.org/10.1371/journal.pone.0240508
- Della Bona A, Cantelli V, Britto VT, Collares KF, Stansbury JW. 3D printing restorative materials using a stereolithographic technique: a systematic review. Dent Mater. 2021; 37: 336-50. https://doi.org/10.1016/j.dental.2020.11.030
- Peng CC, Chung KH, Ramos V Jr. Assessment of the adaptation of interim crowns using different measurement techniques. J Prosthodont. 2020; 29: 87-93. https://doi.org/10.1111/jopr.13122
- Rungrojwittayakul O, Kan JY, Shiozaki K, Swamidass RS, Goodacre BJ, Goodacre CJ, Lozada JL. Accuracy of 3D printed models created by two technologies of printers with different designs of model base. J Prosthodont. 2020; 29: 124-8. https://doi.org/10.1111/jopr.13107
- Kang SY, Park JH, Kim JH, Kim WC. Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique. J Adv Prosthodont. 2018; 10: 354-60. https://doi.org/10.4047/jap.2018.10.5.354
- Revilla-Leon M, Morillo JA, Att W, Ozcan M. Chemical composition, Knoop hardness, surface roughness, and adhesion aspects of additively manufactured dental interim materials. J Prosthodont. 2021; 30: 698-705. https://doi.org/10.1111/jopr.13302
- Berger JC, Driscoll CF, Romberg E, Luo Q, Thompson G. Surface roughness of denture base acrylic resins after processing and after polishing. J Prosthodont. 2006; 15: 180-6. https://doi.org/10.1111/j.1532-849x.2006.00098.x
- Kozmacs C, Hollmann B, Arnold WH, Naumova E, Piwowarczyk A. Polishing of monolithic zirconia crowns-results of different dental practitioner groups. Dent J (Basel). 2017; 5: 30. https://doi.org/10.3390/dj5040030
- Soares IA, Leite PKBDS, Farias OR, Lemos GA, Batista AUD, Montenegro RV. Polishing methods' influence on color stability and roughness of 2 provisional prosthodontic materials. J Prosthodont. 2019; 28: 564-71. https://doi.org/10.1111/jopr.13062
- Al Hamad KQ, Abu Al-Addous AM, Al-Wahadni AM, Baba NZ, Goodacre BJ. Surface roughness of monolithic and layered zirconia restorations at different stages of finishing and polishing: an in vitro study. J Prosthodont. 2019; 28: 818-25. https://doi.org/10.1111/jopr.13071
- Yu BY, Son K, Lee KB. Evaluation of intaglio surface trueness and margin quality of interim crowns in accordance with the build angle of stereolithography apparatus 3-dimensional printing. J Prosthet Dent. 2021; 126: 231-7. https://doi.org/10.1016/j.prosdent.2020.04.028
- Son K, Yu BY, Lee JH, Son YT, Lee KB. Comparison of intaglio surface adjustment in the oral cavity for lithium disilicate crowns fabricated using different scanners. J Prosthodont. 2021; 30: 276-81. https://doi.org/10.1111/jopr.13259
- Arezoobakhsh A, Shayegh SS, Jamali Ghomi A, Hakimaneh SMR. Comparison of marginal and internal fit of 3-unit zirconia frameworks fabricated with CAD-CAM technology using direct and indirect digital scans. J Prosthet Dent. 2020; 123: 105-12. https://doi.org/10.1016/j.prosdent.2018.10.023
- Martinez S, Cuesta E, Barreiro J, Alvarez B. Analysis of laser scanning and strategies for dimensional and geometrical control. Int J Adv Manuf Technol. 2010; 46: 621-9. https://doi.org/10.1007/s00170-009-2106-8
- Choi YK, Banerjee A. Tool path generation and tolerance analysis for free-form surfaces. Int J Mach Tools Manuf. 2007; 47: 689-96. https://doi.org/10.1016/j.ijmachtools.2006.04.014
- Wang W, Yu H, Liu Y, Jiang X, Gao B. Trueness analysis of zirconia crowns fabricated with 3-dimensional printing. J Prosthet Dent. 2019; 121: 285-91. https://doi.org/10.1016/j.prosdent.2018.04.012
- Son K, Yu BY, Yoon TH, Lee KB. Comparative study of the trueness of the inner surface of crowns fabricated from three types of lithium disilicate blocks. Appl Sci. 2019; 9: 1798. https://doi.org/10.3390/app9091798
- Papadiochou S, Pissiotis AL. Marginal adaptation and CAD-CAM technology: a systematic review of restorative material and fabrication techniques. J Prosthet Dent. 2018; 119: 545-51. https://doi.org/10.1016/j.prosdent.2017.07.001
- de Paula Silveira AC, Chaves SB, Hilgert LA, Ribeiro AP. Marginal and internal fit of CAD-CAM-fabricated composite resin and ceramic crowns scanned by 2 intraoral cameras. J Prosthet Dent. 2017; 117: 386-92. https://doi.org/10.1016/j.prosdent.2016.07.017
- Renne W, Wolf B, Kessler R, McPherson K, Mennito AS. Evaluation of the marginal fit of CAD/CAM crowns fabricated using two different chairside CAD/CAM systems on preparations of varying quality. J Esthet Restor Dent. 2015; 27: 194-202. https://doi.org/10.1111/jerd.12148
- Son K, Lee S, Kang SH, Park J, Lee KB, Jeon M, Yun BJ. A comparison study of marginal and internal fit assessment methods for fixed dental prostheses. J Clin Med. 2019; 8: 785. https://doi.org/10.3390/jcm8060785
- Dolev E, Bitterman Y, Meirowitz A. Comparison of marginal fit between CAD-CAM and hot-press lithium disilicate crowns. J Prosthet Dent. 2019; 121: 124-8. https://doi.org/10.1016/j.prosdent.2018.03.035
- Onishi Y, Yamashita R, Amaya K, Hirai Y. Numerical analysis of pattern shape deformation in UV imprint due to curing shrinkage. J Photopolym Sci Technol. 2020; 33: 245-50. https://doi.org/10.2494/photopolymer.33.245
- Zhang Q, Weng S, Hamel CM, Montgomery SM, Wu J, Kuang X, Zhou K, Qi HJ. Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing. Extreme Mech Lett. 2021; 48: 101403. https://doi.org/10.1016/j.eml.2021.101403
- Zhao M, Geng Y, Fan S, Yao X, Zhu M, Zhang Y. 3D-printed strong hybrid materials with low shrinkage for dental restoration. Compos Sci Technol. 2021; 213: 108902. https://doi.org/10.1016/j.compscitech.2021.108902
- Deng Y, Li J, He Z, Hong J, Bao J. Urethane acrylate-based photosensitive resin for three-dimensional printing of stereolithographic elastomer. J Appl Polym Sci. 2020; 137: e49294.
- Motagi S, Namilae S. In-situ investigation of resin shrinkage in the composite manufacturing environment. Appl Compos Mater. 2021; 28: 651-7. https://doi.org/10.1007/s10443-021-09887-x
- Mai HN, Lee KB, Lee DH. Fit of interim crowns fabricated using photopolymer-jetting 3D printing. J Prosthet Dent. 2017; 118: 208-15. https://doi.org/10.1016/j.prosdent.2016.10.030
- Kelvin Khng KY, Ettinger RL, Armstrong SR, Lindquist T, Gratton DG, Qian F. In vitro evaluation of the marginal integrity of CAD/CAM interim crowns. J Prosthet Dent. 2016; 115: 617-23. https://doi.org/10.1016/j.prosdent.2015.10.002
- Zhao Z, Mu X, Wu J, Qi HJ, Fang D. Effects of oxygen on interfacial strength of incremental forming of materials by photopolymerization. Extreme Mech Lett. 2016; 9: 108-18. https://doi.org/10.1016/j.eml.2016.05.012
- Khosravani MR. Mechanical behavior of restorative dental composites under various loading conditions. J Mech Behav Biomed Mater. 2019; 93: 151-7. https://doi.org/10.1016/j.jmbbm.2019.02.009