Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

An analysis on the drop impact simulation of dual pump cap container made of eco-friendly materials

친환경 소재로 형성된 듀얼 펌프캡 용기의 낙하충격 시뮬레이션 분석

  • Wi, Eun-Chan (Department of Mechanical Convergence Engineering, Induk University) ;
  • Ko, Min-Sung (Department of Mechanical Convergence Engineering, Induk University) ;
  • Kim, Hyun-Jeong (Department of Mechanical Convergence Engineering, Induk University) ;
  • Lee, Joong-Bae (ILLUPACK Co.,Ltd) ;
  • Kim, Min-Su (ILLUPACK Co.,Ltd) ;
  • Lee, Joo-Hyung (Department of Mechanical Design and Robot Engineering, Seoul National University of Science&Technology) ;
  • Kong, Jung-Shik (Department of Mechanical Convergence Engineering, Induk University) ;
  • Baek, Seung-Yub (Department of Mechanical Convergence Engineering, Induk University)
  • 위은찬 (인덕대학교 융합기계공학과) ;
  • 고민성 (인덕대학교 융합기계공학과) ;
  • 김현정 (인덕대학교 융합기계공학과) ;
  • 이중배 ((주)이루팩) ;
  • 김민수 ((주)이루팩) ;
  • 이주형 (서울과학기술대학교 기계설계로봇공학과) ;
  • 공정식 (인덕대학교 융합기계공학과) ;
  • 백승엽 (인덕대학교 융합기계공학과)
  • Received : 2021.03.21
  • Accepted : 2021.03.31
  • Published : 2021.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Pump cap is a product that is widely used due to its ease of use and simple operation. These pump caps are applied to heterogeneous functional cosmetics and are being developed as dual pump caps. However, the conventional dual pump cap has a problem in that it is inconvenient to use and leakage occurs. In addition, it is formed of a plurality of materials, and there is a problem that is difficult to recycle. Lately, since the problem of environmental pollution is getting serious, the dual pump cap, which is difficult to recycle, cannot be used. Currently, eco-friendliness has been considered in Korea, and there are no dual pump cap containers with excellent sealing performance. Therefore, in this study, a dual pump cap container made of eco-friendly material was designed. In addition, finite element analysis was performed to verify the design feasibility of the product.

Keywords

References

  1. Sung-Taek Jung, Seong-Hyun Kim, Hyun-Jeong Kim, Joong-Bae Lee and Seung-Yub Baek, "An analysis on the injection mold simulation of single cushion pact cosmetic container for the friendly-environment and high productivity," Journal of the Korea Society of Die and Mold Engineering, 12 (2), pp. 51-56, 2018.
  2. Sung-Taek Jung, Hyun-Jeong Kim, Eun-Chan Wi, Min-Su Kim, Joong-Bae Lee and Seung-Yub Baek, "Hinge Design and Injection Molding Simulation of Cosmetic Cushion Fact Container Using Eco-Friendly Materials," Journal of the Korea Society of Die and Mold Engineering, 13 (3), pp. 35-40, 2019.
  3. Jae-Hak Joung, Young-Ho Seong, and Hyun-Ho Choi., "A Study on Strength Evaluation of LCD Glass for Drop test," Journal of the Korean Society for Precision Engineering, 24(10), pp. 99-108 2007.
  4. Young Kim, Mu-Yeol Seo, Hakim Cimm, and Tae-Won Kim., "Determination of the Shear Modulus of Silicone Rubber by using Impact Test and Finite Element Analysis," The Korean Society of Mechanical Engineers spring and autumn Academic conference, pp. 17-21, 2008.
  5. Jenq, S. T., Sheu, H. S., Yeh, C. L., Lai, Y. S., and Wu, J. D., "High-G drop impact response and failure analysis of a chip packaged printed circuit board," International journal of impact engineering, 34(10), pp. 1655-1667, 2007. https://doi.org/10.1016/j.ijimpeng.2006.07.004
  6. Jiang, F., Dong, S., Zhao, Y., Xie, Z., and Soares, C. G., "Investigation on the deformation response of submarine pipelines subjected to impact loads by dropped objects," Ocean Engineering, 194, 106638, 2019. https://doi.org/10.1016/j.oceaneng.2019.106638
  7. Dong-Hwan Kang, Mu-Yeol Seo, Hakin Gimm, and Tae-Won Kim., "Determination of Shock Absorption Performance and Shear Modulus of Rubbers by Drop Impact Tes," Transactions of the Korean Society of Mechanical Engineers - A 33(4), pp. 321-328, 2009. 4, https://doi.org/10.3795/KSME-A.2009.33.4.321
  8. Sung-Soo Kang, Jong-Su Kim, and Gyun-Ho Seol., "Impact Analysis of Freely Falling Cellular Phone," Journal of the Korean Society of Manufacturing Technology Engineers 22(6), pp. 963-968, 2013. https://doi.org/10.7735/ksmte.2013.22.6.963
  9. Wang, Y. Y., Lu, C., Li, J., Tan, X. M., and Tse, Y. C., "Simulation of drop/impact reliability for electronic devices," Finite elements in analysis and design, 41(6), pp. 667-680, 2005. https://doi.org/10.1016/j.finel.2004.09.001