Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Design of Slope Correction Device

경사 면 보정 장치의 구조 설계에 관한 연구

  • Kim, Jeong-Hwa (Aeronautical Mechatronics Department, Korea Polytechnic College Aviation Campus) ;
  • Lee, Do-Yeong (Computer Aided Mechanical Design Department, Korea Polytechnic College Changwon Campus)
  • 김정화 (한국폴리텍대학 항공캠퍼스 항공메카트로닉스과) ;
  • 이도영 (한국폴리텍대학 창원캠퍼스 컴퓨터응용기계설계과)
  • Received : 2020.09.21
  • Accepted : 2020.11.30
  • Published : 2021.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents an optimized design technique that can satisfy the design input values. Numerical analysis was performed on the slope correction device based on the first design. The stress distribution was confirmed when the load specified as the design input value was applied, and design changes were introduced for parts for which the design safety factor did not meet the standard to ensure rigidity. And the results were verified through FEA.

Keywords

References

  1. Kim, J. H., "A Study on the Structural Analysis of the Valve Block of Axial Piston Pump with a Swash Plate Type", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 52-57, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.052
  2. Choi, J. W., "Finite Element Analysis Theory and Practice", Bogdoo, pp. 136-137, 2020.
  3. Kim, J. H., Shin, M. S., Kim, M. K., "A study on Structural Improvement of the Shashplate Axial Piston Pump Valve Block (1)", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 69-75, 2018. https://doi.org/10.14775/ksmpe.2018.17.1.069
  4. Kim, J. H., Shin, M. S., Kim, M. K., "A study on Structural Improvement of the Shashplate Axial Piston Pump Valve Block (2)", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 76-81, 2018.
  5. Nam., K. S., Choi, J. K., Choi, H. M., Kim, J. K., Yeum, S. H., Lee, S. S., "Study on the Improvement of Strength of Excavator Attachments Considering the Field Environment", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 122-128, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.122
  6. Lee, W. S., An, B. S., Kim, J. H., Lee, J. C., Woo, B. G., Lee, Y. S., "A Study on Structural Safety of Integrated Machine for Grindin Wheel Forming", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 84-88, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.084