Steel and Composite Structures

  • 제39권1호
  • /
  • Pages.35-50
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimized stiffener detailing for shear links in eccentrically braced frames

  • Ozkilic, Yasin O. (Department of Civil Engineering, Necmettin Erbakan University)
  • 투고 : 2020.12.11
  • 심사 : 2021.03.09
  • 발행 : 2021.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

Eccentrically braced frames (EBFs) are utilized as a lateral resisting system in high seismic zones. Links are the primary source of energy dissipation and they are exposed to high deformation, which may lead to buckling. Web stiffeners were introduced to prevent buckling of shear link. AISC 341 provides the required vertical stiffeners for a shear link. In this study, different stiffener configurations were examined. The main objective is to improve the behavior of short links using different stiffener configurations. Pursuant to this goal, a comprehensive numerical study is conducted using ABAQUS. Shear links with different stiffener configurations were subjected to cyclic loading using loading protocol mandated by AISC 341. The results are compared in terms of energy dissipation and shear capacities and rupture index. The proposed stiffener configurations were further verified with different link length ratios, I-shapes and thickness of stiffener. Based on the results, the stiffener configuration with two vertical and two diagonal stiffeners perpendicular to each other is recommended. The proposed stiffener configuration can increase the shear capacity, energy dissipation capacity and the ratio of energy/weight up to 27%, 38% and 30%, respectively. Detailing of the proposed stiffener configuration is presented.

키워드

참고문헌

  1. AISC (2016), AISC 341-16, Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, IL, USA
  2. Abar, B.M., Ghobadi, M.S. and Jazany, R.A. (2020), "Double shear bolted bracket moment connections, part 2: Four-bolt configuration response evaluation", J. Constr. Steel Res., 174, 106281. https://doi.org/10.1016/j.jcsr.2020.106281
  3. Aksoylu, C., Ozkilic, Y.O. and Arslan, M.H. (2020a), "Damages on prefabricated concrete dapped-end purlins due to snow loads and a novel reinforcement detail", Eng. Struct., 225, 111225. https://doi.org/10.1016/j.engstruct.2020.111225.
  4. Aksoylu, C., Ozkilic, Y.O., Yazman, S., Gemi, L. and Arslan, M.H. (2021), "Inceltilmis Uclu Onuretimli Asik Kirislerinin Yuk Tasima Kapasitelerinin Deneysel ve Numerik Olarak Irdelenmesi ve Cozum Onerileri", Teknik Dergi, 32(3). (in Turkish) https://doi.org/10.18400/tekderg.667066.
  5. Bozkurt, M.B. and Topkaya, C. (2017), "Replaceable links with direct brace attachments for eccentrically braced frames", Earthq. Eng. Struct. D., 46(13), 2121-2139. https://doi.org/10.1002/eqe.2896.
  6. Bozkurt, M.B., Kazemzadeh Azad, S. and Topkaya, C. (2018), "Low-cycle fatigue testing of shear links and calibration of a damage law", J. Struct. Eng., 144(10), 04018189. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002192.
  7. Bozkurt, M.B., Kazemzadeh Azad, S. and Topkaya, C. (2019), "Development of detachable replaceable links for eccentrically braced frames", Earthq. Eng. Struct. D., 48(10), 1134-1155. https://doi.org/10.1002/eqe.3181.
  8. Chao, S.H., Khandelwal, K. and El-Tawil, S. (2006), "Ductile web fracture initiation in steel shear links", J. Struct. Eng., 132(8), 1192-1200. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:8(1192).
  9. Chegeni, B. and Mohebkhah, A. (2014), "Rotation capacity improvement of long link beams in eccentrically braced frames", Scientia Iranica, 21(3), 516-524.
  10. Daneshmand, A. and Hashemi, B.H. (2012), "Performance of intermediate and long links in eccentrically braced frames", J. Constr. Steel Res., 70, 167-176. https://doi.org/10.1016/j.jcsr.2011.10.011.
  11. Davarpanah, M., Ronagh, H., Memarzadeh, P. and Behnamfar, F. (2020), "Cyclic behaviour of elliptical-shaped reduced web section connection", Structures, 24, 955-973. Elsevier. https://doi.org/10.1016/j.istruc.2020.02.016.
  12. El-Tawil, S., Vidarsson, E., Mikesell, T. and Kunnath, S.K. (1999). "Inelastic behavior and design of steel panel zones", J. Struct. Eng., 125(2), 183-193. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:2(183).
  13. Elkady, A. and Lignos, D.G. (2015), "Analytical investigation of the cyclic behavior and plastic hinge formation in deep wide-flange steel beam-columns", Bull. Earthq. Eng., 13(4), 1097-1118. http://doi.org 10.1007/s10518-014-9640-y.
  14. He, L., Chen, S. and Jiang, H. (2020), "Study of a new type of steel slit shear wall with introduced out-of-plane folding", Struct. Eng. Mech., 75(2), 229-237. http://doi.org/10.12989/sem.2020.75.2.229.
  15. Hjelmstad, K.D and Popov, E.P. (1983), "Cyclic behavior and design of link beams", J. Struct. Eng., 109(10), 2387-2403. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:10(2387)
  16. Hu, S. and Wang, Z. (2014), "Study of an optimum design method for links", The Open Civil Eng. J., 8(1), 335-343. http://doi.org/10.2174/1874149501408010335.
  17. Karalis, A.A. and Stylianidis, K.C. (2013), "Experimental investigation of existing R/C frames strengthened by high dissipation steel link elements", Earthq. Struct., 5(2), 143-160. http://doi.org/10.12989/eas.2013.5.2.143.
  18. Kasai, K. and Popov, E.P. (1986). "Cyclic web buckling control for shear link beams", J. Struct. Eng., 112(3), 505-523. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(505)
  19. Kazemzadeh, A. and Topkaya, C. (2017), "A review of research on steel eccentrically braced frames", J. Constr. Steel Res., 128, 53-73. https://doi.org/10.1016/j.jcsr.2016.07.032.
  20. Koken, A. and Koroglu, M.A. (2015), "Experimental study on beam-to-column connections of steel frame structures with steel slit dampers", J. Perform. Constr. Fac., 29(2), 04014066. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000553.
  21. Koroglu, M.A., Koken, A. and Dere, Y. (2018), "Use of different shaped steel slit dampers in beam to column connections of steel frames under cycling loading", Adv. Steel Constr., 14(2), 251-273. https://doi.org/10.18057/IJASC.2018.14.2.7.
  22. Labed, A. and Benmansour, T. (2020), "A numerical investigation of the inelastic cyclic behaviour of short and long links designed according to RPA 99 provisions", Asian J. Civil Eng., 21(2), 217-228. https://doi.org/10.1007/s42107-019-00200-7.
  23. Latour, M., D'Aniello, M., Zimbru, M., Rizzano, G., Piluso, V. and Landolfo, R. (2018), "Removable friction dampers for low-damage steel beam-to-column joints", Soil Dynam. Earthq. Eng., 115, 66-81. https://doi.org/10.1016/j.soildyn.2018.08.002.
  24. Lian, M., Cheng, Q., Zhang, H. and Su, M. (2020), "Numerical study of the seismic behavior of steel frame-tube structures with bolted web-connected replaceable shear links", Steel Compos. Struct., 35(3), 305-325. http://doi.org/10.12989/scs.2020.35.3.305.
  25. Lian, M., Zhang, H., Cheng, Q. and Su, M. (2019), "Finite element analysis for the seismic performance of steel frame-tube structures with replaceable shear links", Steel Compos. Struct., 30(4), 365-382. http://doi.org/10.12989/scs.2019.30.4.365.
  26. Madenci, E., Ozkilic, Y.O. and Gemi, L. (2020a), "Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations", Compos. Struct., 254, 112806. https://doi.org/10.1016/j.compstruct.2020.112806.
  27. Madenci, E., Ozkilic, Y.O. and Gemi, L. (2020b), "Experimental and theoretical investigation on flexure performance of pultruded GFRP composite beams with damage analyses", Compos. Struct., 242, 112162. https://doi.org/10.1016/j.compstruct.2020.112162.
  28. Madenci, E., Ozkilic, Y.O. and Gemi, L. (2020c), "Theoretical investigation on static analysis of pultruded GFRP composite beams. Akademik Platform Muhendislik ve Fen Bilimleri Dergisi", 8(3), 483-490. https://doi.org/10.21541/apjes.734770.
  29. Mao, C., Ricles, J., Lu, L.W. and Fisher, J. (2001), "Effect of local details on ductility of welded moment connections", J. Struct. Eng., 127(9), 1036-1044. https://doi.org/10.1061/(asce)0733-9445(2001)127:9(1036)
  30. Mojarad, M., Daei, M. and Hejazi, M. (2017), "Optimal Stiffeners Spacing for Intermediate Link in Eccentrically Braced Frame to Increase Energy Dissipation", AUT J. Civil Eng., 1(1), 39-44. https://doi.org/10.22060/CEEJ.2017.12345.5176.
  31. Mojarad, M., Daei, M. and Hejazi, M. (2020), "Optimal Design Parameters of Stiffeners for Improving Seismic Performance of Links in EBFs", Int. J. Steel Struct., 1(18), 1765-1782. https://doi.org/10.1007/s13296-020-00406-5.
  32. Nazaralizadeh, H., Ronagh, H., Memarzadeh, P. and Behnamfar, F. (2020), "Cyclic performance of bolted end-plate RWS connection with vertical-slits", J. Constr. Steel Res., 173, 106236. https://doi.org/10.1016/j.jcsr.2020.106236.
  33. Nia, M.M. and Moradi, S. (2020), "Effects of design factors on the cyclic response of sloped RBS moment connections", Eng. Struct., 207, 110228. https://doi.org/10.1016/j.engstruct.2020.110228
  34. Okazaki, T. and Engelhardt, M.D. (2007), "Cyclic loading behavior of EBF links constructed of ASTM A992 steel", J. Constr. Steel Res., 63(6), 751-765. https://doi.org/10.1016/j.jcsr.2006.08.004.
  35. Ozkilic, Y.O. (2019), "The Effects of Stiffener Configurations on Long Links", Proceedings of the 8th InternatIonal Steel Structures Symposium, Konya, Turkey, October.
  36. Ozkilic, Y.O. (2020a), "A new replaceable fuse for moment resisting frames: Replaceable bolted reduced beam section connections", Steel Compos. Struct., 35(3), 353-370. http://doi.org/10.12989/scs.2020.35.3.353.
  37. Ozkilic, Y.O. (2020b), Experimental and Numerical Studies on Replaceable Links for Eccentrically Braced Frames, Middle East Technical University, doctoral dissertation
  38. Ozkilic, Y.O., Madenci, E. and Gemi, L. (2020c), "Tensile and compressive behaviors of the pultruded GFRP lamina", Turkish J. Eng., 4(4), 169-175. https://doi.org/10.31127/tuje.631481
  39. Ozkilic, Y.O., Bozkurt, M.B. and Topkaya, C. (2021a), "Mid-Spliced End-Plated Replaceable Links for Eccentrically Braced Frames", Engineering Structures, (in press).
  40. Ozkilic, Y.O., Aksoylu, C. and Arslan, M.H. (2021b), "Experimental and numerical investigations of steel fiber reinforced concrete dapped-end purlins", J. Build. Eng., 36, 102119. https://doi.org/10.1016/j.jobe.2020.102119.
  41. Ozkilic, Y.O., Yazman, S., Aksoylu, C., Arslan, M.H. and Gemi, L. (2021c), "Numerical investigation of the parameters influencing the behavior of dapped end prefabricated concrete purlins with and without CFRP strengthening", Constr. Build. Mater., 275, 122173. https://doi.org/10.1016/j.conbuildmat.2020.122173.
  42. Pandikkadavath, M.S. and Sahoo, D.R. (2016), "Cyclic testing of short-length buckling-restrained braces with detachable casings", Earthq. Struct., 10(3), 699-716. https://doi.org/10.12989/eas.2016.10.3.699.
  43. Razavi Tabatabaei, S.A., Mirghaderi, S.R. and Hosseini, A. (2014), "Experimental and numerical developing of reduced length buckling-restrained braces", Eng. Struct., 77, 143-160. https://doi.org/10.1016/j.engstruct.2014.07.034.
  44. Richards, P.W. and Uang, C.M. (2005). "Effect of flange width-thickness ratio on eccentrically braced frames link cyclic rotation capacity", J. Struct. Eng., 131(10), 1546-1552. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:10(1546).
  45. Rousta, A.M. and Zahrai, S.M. (2017), "Cyclic testing of innovative two-level control system: Knee brace & vertical link in series in chevron braced steel frames", Struct. Eng. Mech., 64(3), 301-310. http://doi.org/10.12989/sem.2017.64.3.301.
  46. Saadatnia, M., Riahi, H.T. and Izadinia, M. (2020), "The effect of cyclic loading on the rubber bearing with slit damper devices based on finite element method", Earthq. Struct., 18(2), 215-222. http://doi.org/10.12989/eas.2020.18.2.215.
  47. Saleh, A., Zahrai, S.M. and Mirghaderi, S.R. (2016), "Experimental study on innovative tubular web RBS connections in steel MRFs with typical shallow beams", Struct. Eng. Mech., 57(5), 785-808. http://dx.doi.org/10.12989/sem.2016.57.5.785.
  48. Tashakori, J., Razzaghi, J. and Ansari, S. (2019), "Reassessment of current design criteria of plastic hinges in shear links", J. Constr. Steel Res., 158, 350-365. https://doi.org/10.1016/j.jcsr.2019.04.006.
  49. Xu, J., Wang, S.L., Mohamed, H.S., Han, J., Han, Z., Tu, J. and Li, Z. (2021), "Seismic performance of shear energy dissipation beams in D-shaped eccentrically braced steel frames", J. Constr. Steel Res., 180, 106584. https://doi.org/10.1016/j.jcsr.2021.106584.
  50. Vajdian, M., Parvari, A. and Afzali, M. (2020), "Improvement of Seismic Performance of Beam-column Connection With Replaceable Drilled Attachment Parts", Periodica Polytechnica Civil Engineering, https://doi.org/10.3311/PPci.15239.
  51. Vatansever, C. and Kutsal, K. (2018), "Effect of bolted splice within the plastic hinge zone on beam-to-column connection behavior", Steel Compos. Struct., 28(6), 767-778. https://doi.org/10.12989/scs.2018.28.6.767.
  52. Volynkin, D., Dusicka, P. and Clifton, G.C. (2019). "Intermediate Web Stiffener Spacing Evaluation for Shear Links", J. Struct. Eng., 145(2), 04018257. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002244.
  53. Yurisman, Y., Budiono, B., Moestopo, M. and Suarjana, M. (2010), "Behavior of Shear Link of WFSection with Diagonal Web Stiffener of Eccentrically Braced Frame (EBF) of Steel Structure", J. Eng. Technol. Sci., 42(2), 103-128. http://dx.doi.org/10.5614%2Fitbj.eng.sci.2010.42.2.1. https://doi.org/10.5614%2Fitbj.eng.sci.2010.42.2.1
  54. Zahrai, S.M., Mirghaderi, S.R. and Saleh, A. (2017a). "Increasing plastic hinge length using two pipes in a proposed web reduced beam section, an experimental and numerical study", Steel Compos. Struct., 23(4), 421-433. https://doi.org/10.12989/scs.2017.23.4.421.
  55. Zahrai, S.M., Mirghaderi, S.R. and Saleh, A. (2017b), "Tubular Web Reduced Beam Section (TW-RBS) connection, a numerical and experimental study and result comparison", Steel Compos. Struct., 23(5), 571-583. https://doi.org/10.12989/scs.2017.23.5.571
  56. Zarsav, S., Zahrai, S.M. and Oskouei, A.V. (2016), "Effect of stiffener arrangement on hysteretic behavior of link-to-column connections", Struct. Eng. Mech., 57(6), 1051-1064. https://doi.org/10.12989/sem.2016.57.6.1051.

피인용 문헌

  1. Experimental analysis of shear deficient reinforced concrete beams strengthened by glass fiber strip composites and mechanical stitches vol.40, pp.2, 2021, https://doi.org/10.12989/scs.2021.40.2.267
  2. Numerical evaluation of effects of shear span, stirrup spacing and angle of stirrup on reinforced concrete beam behaviour vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.309