Geomechanics and Engineering

  • 제24권4호
  • /
  • Pages.399-406
  • /
  • 2021
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Probabilistic tunnel face stability analysis: A comparison between LEM and LAM

  • Pan, Qiujing (Department of Civil Engineering, Central South University) ;
  • Chen, Zhiyu (Department of Civil Engineering, Central South University) ;
  • Wu, Yimin (Department of Civil Engineering, Central South University) ;
  • Dias, Daniel (Laboratory 3SR, Grenoble Alpes University) ;
  • Oreste, Pierpaolo (Department of Environmental, Land and Infrastructural Engineering)
  • 투고 : 2019.06.20
  • 심사 : 2021.02.06
  • 발행 : 2021.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

It is a key issue in the tunnel design to evaluate the stability of the excavation face. Two efficient analytical models in the context of the limit equilibrium method (LEM) and the limit analysis method (LAM) are used to carry out the deterministic calculations of the safety factor. The safety factor obtained by these two models agrees well with that provided by the numerical modelling by FLAC 3D, but consuming less time. A simple probabilistic approach based on the Mote-Carlo Simulation technique which can quickly calculate the probability distribution of the safety factor was used to perform the probabilistic analysis on the tunnel face stability. Both the cumulative probabilistic distribution and the probability density function in terms of the safety factor were obtained. The obtained results show the effectiveness of this probabilistic approach in the tunnel design.

키워드

참고문헌

  1. Anagnostou, G. and Perazzelli, P. (2015), "Analysis method and design charts for bolt reinforcement of the tunnel face in cohesive-frictional soils", Tunn. Undergr. Sp. Tech., 47, 162-181. https://doi.org/10.1016/j.tust.2014.10.007.
  2. Anthoine, A. (1989), "Mixed modelling of reinforced soils within the framework of the yield design theory", Comput. Geotech., 7(1), 67-82. https://doi.org/10.1016/0266-352x(89)90007-4.
  3. Baecher, G.B. and Christian, J.T. (2005), Reliability and Statistics in Geotechnical Engineering. John Wiley &sons Inc., Hoboken, New Jersey, U.S.A.
  4. Chen, G.H., Zou, J.F. and Qian, Z.H. (2019), "An improved collapse analysis mechanism for the face stability of shield tunnel in layered soils", Geomech. Eng., 17(1), 97-107. https://doi.org/10.12989/gae.2019.17.1.097.
  5. Chen, W.F. (1975), Limit Analysis and Soil Plasticity, Elsevier Scientific Publishing Company lnc., Amsterdam.
  6. Chok, Y., Jaksa, M.B., Kaggwa, W.S., Griffiths, D.V. and Fenton, G.A. (2016), "Neural network prediction of the reliability of heterogeneous cohesive slopes", Int. J. Numer. Anal. Met. Geomech., 40(11), 1556-1569. https://doi.org/10.1002/nag.2496.
  7. Dias, D. and Oreste, P. (2013), "Key factors in the face stability analysis of shallow tunnels". Am. J. Appl. Sci., 10(9), 1025. https://doi.org/10.3844/ajassp.2013.1025.1038.
  8. Fargnoli, V., Gragnano, C.G., Boldini, D. and Amorosi, A. (2015), "3D numerical modelling of soil-structure interaction during EPB tunneling", Geotechnique, 65(1), 23-37. https://doi.org/10.1680/geot.14.p.091.
  9. GuhaRay, A. and Dilip K.B. (2014), "Partial safety factors for retaining walls and slopes: a reliability based approach", Geomech. Eng., 6(2), 99-115. https://doi.org/10.12989/gae.2014.6.2.099.
  10. Ibrahim, E., Soubra, A. H., Mollon, G., Raphael, W., Dias, D. and Reda, A. (2015), "Three-dimensional face stability analysis of pressurized tunnels driven in a multilayered purely frictional medium", Tunn. Undergr. Sp. Tech., 49, 18-34. https://doi.org/10.1016/j.tust.2015.04.001.
  11. Javankhoshdel, S. and Bathurst, R.J. (2015), "Influence of cross-correlation between soil parameters on probability of failure of simple cohesive and c-phi slopes", Can. Geotech. J., 53(5), 839-853. https://doi.org/10.1139/cgj-2015-0109.
  12. Jin, D., Yuan, D., Li, X. and Su, W. (2020), "Probabilistic analysis of the disc cutter failure during TBM tunneling in hard rock", Tunn. Undergr. Sp. Tech., 109, 103744. https://doi.org/10.1016/j.tust.2020.103744
  13. Khezri, N., Mohamad, H. and Fatahi, B. (2016), "Stability assessment of tunnel face in a layered soil using upper bound theorem of limit analysis", Geomech. Eng., 11(4), 471-492. https://doi.org/10.12989/gae.2016.11.4.471.
  14. Lee, I.M., Lee, J.S. and Nam, S.W. (2004), "Effect of seepage force on tunnel face stability reinforced with multi-step pipe grouting", Tunn. Undergr. Sp. Tech., 19(6), 551-565. https://doi.org/10.1016/j.tust.2004.01.003.
  15. Leung, Y.F. and Lo, M.K, (2018), "Probabilistic assessment of pile group response considering superstructure stiffness and three-dimensional soil spatial variability", Comput. Geotech., 103, 193-200. https://doi.org/10.1016/j.compgeo.2018.07.010.
  16. Liu, L.L., Cheng, Y. and Wang, X. (2017), "Genetic algorithm optimized Taylor Kriging surrogate model for system reliability analysis of soil slopes", Landslides, 14(2), 535-546. https://doi.org/10.1007/s10346-016-0736-0.
  17. Liu, L.L., Cheng, Y.M., Pan, Q.J. and Dias, D. (2020). "Incorporating stratigraphic boundary uncertainty into reliability analysis of slopes in spatially variable soils using one-dimensional conditional Markov chain model", Comput. Geotech., 118, 103321. https://doi.org/10.1016/j.compgeo.2019.103321.
  18. Mazek, S. A. (2014), "Evaluation of surface displacement equation due to tunnelling in cohesionless soil", Geomech. Eng., 7(1), 55-73. https://doi.org/10.21608/asat.2013.22232.
  19. Michalowski, R.L. and Nadukuru, S.S. (2013), "Three-dimensional limit analysis of slopes with pore pressure", J. Geotech. Geoenviron. Eng., 39(9), 1604-1610. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000867.
  20. Mollon, G., Dias, D. and Soubra, A.H. (2011), "Rotational failure mechanisms for the face stability analysis of tunnels driven by a pressurized shield", Int. J. Numer. Anal. Met. Geomech., 35(12), 1363-1388. https://doi.org/10.1002/nag.962.
  21. Mollon, G., Dias, D. and Soubra, A.H. (2013), "Continuous velocity fields for collapse and blowout of a pressurized tunnel face in purely cohesive soil", Int. J. Numer. Anal. Met. Geomech., 37(13), 2061-2083. https://doi.org/10.1002/nag.2121.
  22. Pandit, B., Tiwari, G., Latha, G.M. and Babu, G.L.S. (2018), "Stability analysis of a large gold mine open-pit slope using advanced probabilistic method", Rock Mech. Rock Eng., 51(7), 2153-2174. https://doi.org/10.1007/s00603-018-1465-6.
  23. Pinyol, N.M. and Alonso, E.E. (2011), "Design of micropiles for tunnel face reinforcement: Undrained upper bound solution", J. Geotech. Geoenviron. Eng., 138(1), 89-99. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000562.
  24. Oreste, P. (2005), "A probabilistic design approach for tunnel supports", Comput. Geotech., 32(7), 520-534. https://doi.org/10.1016/j.compgeo.2005.09.003.
  25. Oreste, P.P. and Dias, D. (2012), "Stabilisation of the excavation face in shallow tunnels using fibreglass dowels", Rock Mech. Rock Eng., 45(4), 499-517. https://doi.org/10.1007/s00603-012-0234-1.
  26. Phoon, K.K. and Kulhawy, F.H. (1999), "Characterization of geotechnical variability", Can. Geotech. J., 36(4), 612-624. https://doi.org/10.1139/t99-038.
  27. Pan, Q. and Dias, D. (2015), "Face Stability Analysis for a Shield-Driven Tunnel in Anisotropic and Nonhomogeneous Soils by the Kinematical Approach", Int. J. Geomech., 16(3), 04015076. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000569.
  28. Pan, Q. and Dias, D. (2016), "The effect of pore water pressure on tunnel face stability", Int. J. Numer. Anal. Met. Geomech., 40(15), 2123-2136. https://doi.org/10.1002/nag.2528.
  29. Pan, Q. and Dias, D. (2017). "Upper-bound analysis on the face stability of a non-circular tunnel", Tunn. Undergr. Sp. Tech., 62, 96-102. https://doi.org/10.1016/j.tust.2016.11.010.
  30. Saada, Z., Maghous, S. and Garnier. D. (2012), "Stability analysis of rock slopes subjected to seepage forces using the modified Hoek-Brown criterion", Int. J. Rock Mech. Min. Sci., 55, 45-54. https://doi.org/10.1016/j.ijrmms.2012.06.010.
  31. Senent, S. and Jimenez, R. (2015), "A tunnel face failure mechanism for layered ground, considering the possibility of partial collapse", Tunn. Undergr. Sp. Tech., 47, 182-192. https://doi.org/10.1016/j.tust.2014.12.014.
  32. Yang, X.L., Xu, J.S., Lu, Y.X. and Yan, R.M. (2016), "Collapse mechanism of tunnel roof considering joined influences of nonlinearity and non-associated flow rule", Geomech. Eng., 10(1), 21-35. https://doi.org/10.12989/gae.2016.10.1.021.
  33. Yang, X.L. and Li, W.T. (2017). "Reliability analysis of shallow tunnel with surface settlement", Geomech. Eng., 12(2), 313-326. https://doi.org/10.12989/gae.2017.12.2.313.
  34. Zou, J.F. and Xia, M.Y. (2017), "A new approach for the quasi-plane strain-softening problem of cylindrical cavity expansion based on generalized Hoek-Brown failure criterion", Geomech. Eng., 12(2), 257-263. https://doi.org/10.1007/s12206-017-0230-1.
  35. Zhang, W.G., Li, H.R., Wu, C.Z., Li, Y.Q., Liu, Z.Q. and Liu, H.L. (2020), "Soft computing approach for prediction of surface settlement induced by earth pressure balance shield tunneling", Undergr. Sp. https://doi.org/10.1016/j.undsp.2019.12.003.
  36. Zhang, J., Feng, T., Yang, J., Yang, F. and Gao, Y. (2018a), "Upper-bound stability analysis of dual unlined horseshoe-shaped tunnels subjected to gravity", Comput. Geotech., 97, 103-110. https://doi.org/10.1016/j.compgeo.2018.01.006.
  37. Zhang, J., Feng, T., Yang, J., Yang, F. and Gao, Y. (2018b), "Upper-bound finite-element analysis of characteristics of critical settlement induced by tunneling in undrained clay", Int. J. Geomech., 18(9), 04018110. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001224.