DOI QR코드

DOI QR Code

A comparison of the performance characteristics of large 2 MW and 3 MW wind turbines on existing onshore wind farms

  • Bilgili, Mehmet (Department of Mechanical Engineering, Faculty of Ceyhan Engineering, Cukurova University) ;
  • Ekinci, Firat (Department of Energy System Engineering, Faculty of Engineering, Adana Alparslan Turkes Science and Technology University) ;
  • Demirdelen, Tugce (Department of Electrical and Electronics Engineering, Faculty of Engineering, Adana Alparslan Turkes Science and Technology University)
  • Received : 2019.07.27
  • Accepted : 2021.01.27
  • Published : 2021.02.25

Abstract

The aim of the current study is to compare the performance of large 2 MW and 3 MW wind turbines operating on existing onshore wind farms using Blade Element Momentum (BEM) theory and Angular Momentum (AM) theory and illustrate the performance characteristic curves of the turbines as a function of wind speed (U∞). To achieve this, the measurement data obtained from two different Wind Energy Power Plants (WEPPs) located in the Hatay region of Turkey was used. Two different horizontal-axis wind turbines with capacities of 2 MW and 3 MW were selected for evaluation and comparison. The hub-height wind speed (UD), turbine power output (P), atmospheric air temperature (Tatm) and turbine rotational speed (Ω) data were used in the evaluation of the turbine performance characteristics. Curves of turbine power output (P), axial flow induction factor (a), turbine rotational speed (Ω), turbine power coefficient (CP), blade tip speed ratio (λ), thrust force coefficient (CT) and thrust force (T) as a function of U∞ were obtained for the 2 MW and 3 MW wind turbines and these characteristic curves were compared. Results revealed that, for the same wind speed conditions, the higher-capacity wind turbine (3 MW) was operating at higher turbine power coefficient rates, while rotating at lower rotational speed ratios than the lower-capacity wind turbine (2 MW).

Keywords

References

  1. Ashrafi, Z.N., Ghaderi, M. and Sedaghat, A. (2015), "Parametric study on off-design aerodynamic performance of a horizontal axis wind turbine blade and proposed pitch control", Energy Conversion Management, 93(15), 349-356. https://doi.org/10.1016/j.enconman.2015.01.048.
  2. Bai, C.J. and Wang, W.C. (2016), "Review of computational and experimental approaches to analysis of aerodynamic performance in horizontal-axis wind turbines (HAWTs)", Renew. Sustain. Energy Rev., 63, 506-519. https://doi.org/10.1016/j.rser.2016.05.078.
  3. Bilgili, M. and Yasar, A. (2017), "Performance evaluation of a horizontal axis wind turbine in operation", Int. J. Green Energy 14, 1048-1056. https://doi.org/10.1080/15435075.2017.1357039.
  4. Bilgili, M., Ozbek, A., Sahin, B. and Kahraman, A. (2015), "An overview of renewable electric power capacity and progress in new technologies in the world", Renew. Sustain. Energy Rev., 49, 323-334. https://doi.org/10.1016/j.rser.2015.04.148.
  5. Burton, T., Jenkins, N., Sharpe, D. and Bossanyi, E. (2011), Wind Energy Handbook, John Wiley and Sons, United Kingdom.
  6. GWEC (2020), Global Wind Energy Council, http://www.gwec.net.
  7. Hansen, M.O.L., Sorensen, J.N., Voutsinas, S., Sorensen, N. and Madsen, H.A. (2006), "State of the art in wind turbine aerodynamics and aeroelasticity", Progress Aerosp. Sci., 42(4), 285-330. https://doi.org/10.1016/j.paerosci.2006.10.002.
  8. He, Y., Chan, P. and Li, Q. (2013), "Wind characteristics over different terrains", J. Wind Eng. Ind. Aerod., 120, 51-69. https://doi.org/10.1016/j.jweia.2013.06.016.
  9. IEA (International Energy Agency) (2013), Technology Roadmap Wind Energy, OECD/IEA-2013. https://www.iea.org/publications/freepublications/publication/Wind_2013_Roadmap.pdf.
  10. Ilhan, A., Bilgili M. and Sahin. B. (2018), "Analysis of aerodynamic characteristics of 2 MW horizontal axis large wind turbine", Wind Struct., 27(3), 187-197. http://dx.doi.org/10.12989/was.2018.27.3.187.
  11. Kishinami, K., Taniguchi, H., Suzuki, J., Ibano, H., Kazunou, T. and Turuhami, M. (2005), "Theoretical and experimental study on the aerodynamic characteristics of a horizontal axis wind turbine", Energy, 30, 2089-2100. https://doi.org/10.1016/j.energy.2004.08.015.
  12. Lanzafame, R. and Messina, M. (2010), "Horizontal axis wind turbine working at maximum power coefficient continuously", Renew. Energy, 35(1), 301-306. https://doi.org/10.1016/j.renene.2009.06.020.
  13. Manwell, J.F., McGowan, J.G. and Rogers, A.L. (2009), Wind Energy Explained Theory, Design and Application, John Wiley & Sons, Ltd., United Kingdom.
  14. Rodriguez-Hernandez, O., del Rio, J.A. and Jaramillo, O.A. (2016), "The importance of mean time in power resource assessment for small wind turbine applications", Energy for Sustain. Developm., 30, 32-38. https://doi.org/10.1016/j.esd.2015.10.008.
  15. Sedaghat, A., Assad, M.E.H. and Gaith, M. (2014), "Aerodynamics performance of continuously variable speed horizontal axis wind turbine with optimal blades", Energy, 77(1), 752-759. https://doi.org/10.1016/j.energy.2014.09.048.
  16. VESTAS (2018), https://www.vestas.com/en
  17. Wekesa, D.W., Wang, C. and Wei, Y. (2016), "Empirical and numerical analysis of small wind turbine aerodynamic performance at a plateau terrain in Kenya", Renew. Energy, 90, 377-385. https://doi.org/10.1016/j.renene.2016.01.004