Structural Engineering and Mechanics

  • 제77권6호
  • /
  • Pages.745-751
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Concrete filled double skin square tubular stub columns subjected to compression load

  • Uenaka, Kojiro (Department of Civil Engineering, Kobe City College of Technology)
  • 투고 : 2019.09.04
  • 심사 : 2021.01.19
  • 발행 : 2021.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Concrete filled double skin tubular members (CFDST) consist of double concentric circular or square steel tubes with concrete filled between the two steel tubes. The CFDST members, having a hollow section inside the internal tube, are generally lighter than ordinary concrete filled steel tubular members (CFT) which have a solid cross-section. Therefore, when the CFDST members are applied to bridge piers, reduction of seismic action can be expected. The present study aims to investigate, experimentally, the behavior of CFDST stub columns with double concentric square steel tubes filled with concrete (SS-CFDST) when working under centric compression. Two test parameters, namely, inner-to-outer width ratio and outer square steel tube's width-to-thickness were selected and outer steel tube's width-to-thickness ratio ranging from 70 to 160 were considered. In the results, shear failure of the concrete fill and local buckling of the double skin tubes having largest inner-to-outer width ratio were observed. A method to predict axial loading capacity of SS-CFDST is also proposed. In addition, the load capacity in the axial direction of stub column test on SS-CFDST is compared with that of double circular CFDST. Finally, the biaxial stress behavior of both steel tubes under plane stress is discussed.

키워드

참고문헌

  1. Architectural Institute of Japan (2008), Recommendations for Design and Construction of Concrete Filled Steel Tubular Structures, Maruzen, Tokyo, Japan.
  2. Ding, F.X., Zhang, T., Liu, X.M., Lu, Z.H., Guo, Q. and Jian, G.S. (2017), "Behavior of steel-reinforced concrete-filled square steel tubular stub columns under axial loading", Thin Wall. Struct., 119, 737-748. https://doi.org/10.1016/j.tws.2017.07.021.
  3. Farahi, M., Heidarpour, A., Zhao, X.L. and Al-Mahaidi, R. (2016), "Parametric study on the static compressive behaviour of concrete-filled double-skin sections consisting of corrugated plates", Thin Wall. Struct., 107, 526-542. https://doi.org/10.1016/j.tws.2016.07.007.
  4. Farahi, M., Heidarpour, A., Zhao, X.L. and Al-Mahaidi, R. (2017), "Effect of ultra-high strength steel on mitigation of non-ductile yielding of concrete-filled double-skin columns", Constr. Build. Mater., 147, 736-749. https://doi.org/10.1016/j.conbuildmat.2017.04.189.
  5. Japanese Society of Civil Engineers (1989), Introduction to Mathematical Models of Material Characteristics-Terminology of Constitutive Laws, Tokyo, Japan.
  6. Sulthana, U.M. and Jayachandran, S.A. (2017), "Axial compression behavior of long concrete filled double skinned steel tubular columns", Struct.-Res. J. Inst. Struct. Eng., 9, 157-164. https://doi.org/10.1016/j.istruc.2016.12.002.
  7. Uenaka, K. (2016a), "CFDST stub columns having outer circular and inner square sections under compression", J. Constr. Steel Res., 120, 1-7. https://doi.org/10.1016/j.jcsr.2015.12. 005.
  8. Uenaka, K. (2016b), "Experimental study on concrete filled double square skin tubular columns under centric loading", Proceedings of 7th International Conference of Asian Concrete Federation, Hanoi, Vietnam.
  9. Uenaka, K. and Kitoh, H. (2011), "Mechanical behavior of concrete filled double skin tubular circular deep beams", Thin Wall. Struct., 49(2), 256-263. https://doi.org/10.1016/j.tws.2010.10.005.
  10. Uenaka, K., Kitoh, H. and Sonoda, K. (2008), "Concrete filled Double Skin Tubular Members subjected to Bending", Steel Compos. Struct., 8(4), 297-312. https://doi.org/10.12989/scs.2008.8.4.297.
  11. Uenaka, K., Kitoh, H. and Sonoda, K. (2010), "Concrete filled double skin circular stub columns under compression", Thin Wall. Struct., 48, 19-24. https://doi.org/10.1016/j.tws.2009.08.001.
  12. Wei, S., Mau, S.T., Vipulanandan, C. and Mantrala, S.K. (1995a), "Performance of new sandwich tube under axial loading: Experiment", J. Struct. Eng., 121(12), 1806-1814. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1806).
  13. Wei, S., Mau, S.T., Vipulanandan, C. and Mantrala, S.K. (1995b), "Performance of new sandwich tube under axial loading: Analysis", J. Struct. Eng., 121(12), 1815-1821. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1815).
  14. Yang, Y.F., Bie, X.M., Hou, C. and Han, L.H. (2019), "Analytical behavior and design of square CFDST subjected to local bearing force", J. Constr. Steel Res., 159, 198-214. ttps://doi.org/10.1016/j.jcsr.2019.04.038.
  15. Yang, Y.F., Hou, C., Meng. C.Y. and Han, L.H. (2015), "Investigation on square concrete filled double-skin steel tube (CFDST) subjected to local bearing force: Experiments", Thin Wall. Struct., 94, 394-409. https://doi.org/10.1016/j.tws.2015.04.026.
  16. Zhang, F., Wu, C., Zhao, X.L., Li, Z.X., Heidarpour, A. and Wang, H. (2015), "Numerical modeling of concrete-filled double-skin square tubular columns under blast loading", J. Perform. Constr. Facil., 29(5), B4015002. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000749.
  17. Zhao, X.L. and Grzebieta, R. (2002), "Strength and ductility of concrete filled double skin (SHS inner and SHS outer) tubes", Thin Wall. Struct., 40, 199-213. https://doi.org/10.1016/S0263-8231(01)00060-X.
  18. Zhong, T. and Han, L.H. (2006), "Behaviour of concrete-filled double skin rectangular steel tubular beam-columns", J. Constr. Steel Res., 62, 631-646. https://doi.org/10.1016/j.jcsr.2005.11.008.