Steel and Composite Structures

  • 제38권6호
  • /
  • Pages.705-716
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural behavior of partially prefabricated partially encased composite beams

  • Liang, Jiong-feng (College of Civil and Architecture Engineering, East China University of Technology) ;
  • Zhang, Liu-feng (College of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Yang, Ying-hua (College of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Wei, Li (College of Civil and Architecture Engineering, Wenzhou University)
  • 투고 : 2019.07.20
  • 심사 : 2021.02.25
  • 발행 : 2021.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

An innovative partially precast partially encased composite beam (PPECB) is put forward based on the existing research. In order to study the flexural performance of the new composite beam which has precast part and cast-in-place part, six prefabricated specimens and one cast-in-place specimen are designed with considering the influence of the production method, the steel flange thickness, the concrete strength grade and the stirrup process on the behavior of the composite beam. Through four points loading and test data collection and analysis, the behavior of partially prefabricated specimen is similar to that of cast-in-place specimen, and the casting method, the thickness of the steel flange, the concrete strength grade and the stirrup process have different influence on the crack, yield and peak load bearing capacity of the component. Finally, the calculation theory of plastic bending of partially precast partially encased concrete composite beams is given. The calculation results are in good agreement with the experimental results, which can be used for practical engineering theory guidance. This paper can provide reference value for further research and engineering application.

키워드

참고문헌

  1. ACI 318 (2011), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
  2. Ahmad, S., Masri A. and Abou Saleh, Z. (2018), "Analytical and experimental investigation on the flexural behavior of partially encased composite beams", Alex. Eng. J., 57(3), 1693-1712. https://doi.org/10.1016/j.aej.2017.03.035.
  3. Ahn, J.K. and Lee, C.H. (2017), "Fire behavior and resistance of partially encased and slim-floor composite beams", J. Constr. Steel Res., 129, 276-285. https://doi.org/10.1016/j.jcsr.2016.11.018.
  4. Arikoglu, P., Baran, E. and Topkaya, C. (2020), "Behavior of channel connectors in steel-concrete composite beams with precast slabs", J. Constr. Steel Res., 172, 21-31. https://doi.org/10.1016/j.jcsr.2020.106167.
  5. Balkos, K.D., Sjaarda, M., West, J.S. and Walbridge, S. (2019), "Static and fatigue tests of steel-precast composite beam specimens with through-bolt shear connectors", J. Bridge Eng., 24(5), https://doi.org/10.1061/(ASCE)BE.1943-5592.0001382
  6. Begum, M., Driver, R.G. and Elwi, A.E. (2015), "Parametric study on eccentrically-loaded partially encased composite columns under major axis bending", Steel Compos. Struct., 19(5), 1299-1319. https://doi.org/10.12989/scs.2015.19.5.1299.
  7. Chen, J.J. (1998), "The characteristics and current status of China's construction industry", Constr. Manage. Economics, 16(6), 711-719. https://doi.org/10.1080/014461998372006.
  8. Chopra, A.K. (2010), Dynamics of structures : theory and applications to earthquake engineering. Higher Education Press, Beijing, China. (in Chinese)
  9. Eurocode (2009), Design of composite steel and concrete structures. Part 5.4: Calculation of action effects, European Committee for Standardization; Brussels, Belgium.
  10. Golewski, G.L. (2020), "Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages", Materials, 13(22), 5241. https://doi.org/10.3390/ma13225241.
  11. Golewski, G.L. (2019a), "A new principles for implementation and operation of foundations for machines: A review of recent advances", Struct Eng Mech., 71(3), 317-327. https://doi.org/10.12989/sem.2019.71.3.317.
  12. Golewski, G.L.(2019b), "A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads", Compos. Struct., 223, 110939. https://doi.org/10.1016/j.compstruct.2019.110939.
  13. Golewski, G.L. and Sadowski, T. (2016), "A study of mode III fracture toughness in young and mature concrete with fly ash additive", Solid State Phenomena, 254, 120-125. https://doi.org/10.4028/www.scientific.net/SSP.254.120.
  14. Hong, J., Shen, Q. and Xue, F. (2016), "A multi-regional structural path analysis of the energy supply chain in china's construction industry", Energy Policy, 92, 56-68. https://doi.org/10.1016/j.enpol.2016.01.017.
  15. Jiang, Y., Hu, X.M., Hong, W. and Wang, B. (2016), "Experimental study and theoretical analysis of partially encased continuous composite beams", J. Constr. Steel Res., 117, 152-160. https://doi.org/10.1016/j.jcsr.2015.10.009.
  16. Kindmann, R., Bergmann, R., Cajot, L.G. and Schleich, J.B. (1993), "Effect of reinforced concrete between the flanges of the steel profile of partially encased composite beams", J. Constr. Steel Res., 27(1-3), 107-122. https://doi.org/10.1016/0143-974X(93)90009-H.
  17. Li, W. and Chen, Y.Y. (2015), "Experimental study on seismic behavior of partially encased composite beams", Journal of Building Structures, 36(S1), 330-336. (in Chinese). https://doi.org/10.14006/j.jzjgxb.2015.S1.050
  18. Lu, Y., Cui, P. and Li, D. (2016), "Carbon emissions and policies in china's building and construction industry: evidence from 1994 to 2012", Build Environ., 95, 94-103. https://doi.org/10.1016/j.buildenv.2015.09.011
  19. Liu, H. and Lin, B. (2016), "Energy substitution, efficiency, and the effects of carbon taxation: evidence from china's building construction industry", J. Clean Prod., 141, 1134-1144. https://doi.org/10.1016/j.jclepro.2016.09.119.
  20. Matthias, M. and Karsten, G. (2020), "Crack and deformation behavior of composite beams using partial-depth precast concrete units", Civil Eng. Design, 2(1), 29-44. https://doi.org/10.1002/cend.202000009.
  21. Nardin, S.D. and Debs, A.L.H.C.E. (2009), "Study of partially encased composite beams with innovative position of stud bolts", J. Constr. Steel Res., 65(2), 342-350. https://doi.org/10.1016/j.jcsr.2008.03.021.
  22. Nguyen, G.B. and Machacek, J. (2016), "Effect of local small diameter stud connectors on behavior of partially encased composite beams", Steel Compos. Struct., 20(2), 211-266. https://doi.org/10.12989/scs.2016.20.2.251.
  23. Pereira, M.F., Nardin, S.D. and El Debs, A.L.H.C. (2016), "Structural behavior of partially encased composite columns under axial loads", Steel Compos. Struct., 20(6), 1305-1322. https://doi.org/10.12989/scs.2016.20.6.1305.
  24. Tsavdaridis, K.D., Mello, C.D. and Hawes, M. (2009), "Experimental study of ultra shallow floor beams (USFB) with perforated steel sections", Nordic Steel, 9, 312-319.
  25. Yong, Y., Xue, Y., Yunlong, Y.U., Shao, Y., Ning, M.A. and Yang, Y. (2017), "Experimental study of partially precast steel reinforced concrete beams under positive bending", J. Build. Struct., 38(9), 46-53. (in Chinese). https://doi.org/10.14006/j.jzjgxb.2017.09.006.
  26. Zhang, X., Zhang, S. and Niu, S. (2019), "Experimental studies on seismic behavior of precast hybrid steel-concrete beam", Adv. Struct. Eng., 22(3), 670-686 https://doi.org/10.1177/1369433218796411.