DOI QR코드

DOI QR Code

Stiffness model for "column face in bending" component in tensile zone of bolted joints to SHS/RHS column

  • Ye, Dongchen (Department of Structural Engineering, Tongji University) ;
  • Ke, Ke (Key Laboratory of New Technology for Construction of Cities in Mountain Area, School of Civil Engineering, Chongqing University) ;
  • Chen, Yiyi (Department of Structural Engineering, Tongji University)
  • 투고 : 2019.08.18
  • 심사 : 2021.03.04
  • 발행 : 2021.03.25

초록

The component-based method is widely used to analyze the initial stiffness of joint in steel structures. In this study, an analytical component model for determining the column face stiffness of square or rectangular hollow section (SHS/RHS) subjected to tension was established, focusing on endplate connections. Equations for calculating the stiffness of the SHS/RHS column face in bending were derived through regression analysis using numerical results obtained from a finite element model database. Because the presence of bolt holes decreased the bending stiffness of the column face, this effect was calculated using a novel plate-spring-based model through numerical analysis. The developed component model was first applied to predict the bending stiffness of the SHS column face determined through tests. Furthermore, this model was incorporated into the component-based method with other effective components, e.g., bolts under tension, to determine the tensile stiffness of the T-stub connections, which connects the SHS column, and the initial rotational stiffness of the joints. A comparison between the model predictions, test data, and numerical results confirms that the proposed model shows satisfactory accuracy in evaluating the bending stiffness of SHS column faces.

키워드

참고문헌

  1. Bayo, E., Loureiro, A., LopeZ, M. and Simoes da Silva, L. (2017), General component based cruciform finite elements to model 2D steel joints with beams of equal and different depths, Eng. Struct., 152, 698-708. https://doi.org/10.1016/j.engstruct.2017.09.042.
  2. Bucmys, Z., Daniunas, A., Jaspart, J.P. and Demonceau, J.F. (2018), A component method for cold-formed steel beam-to-column bolted gusset plate joints, Thin-Wall. Struct., 123, 520-527. https://doi.org/10.1016/j.tws.2016.10.022.
  3. Castanheira, D.S., de Lima, L.R.O., da Silva Vellasco, P.C.G., da Silva, A.T. and Rodrigues, M.C. (2019), Numerical modelling of rectangular cold-formed steel and composite columns, Proceedings of the Institution of Civil Engineers - Structures and Buildings, 172(11), 805-818. https://doi.org/10.1680/jstbu.18.00057.
  4. Costa Neves, L. and Gomes, F. (1996), Semi-rigid behaviour of beam-to-column minor-axis joints, IABSE reports, 75, 207-216 https://doi.org/10.5169/SEALS-56911.
  5. de Lima, L.R.O., de Andrade, S.A.L., da S. Vellasco, P.C.G. and da Silva, L.S. (2002), Experimental and mechanical model for predicting the behaviour of minor axis beam-to-column semi-rigid joints, International Journal of Mechanical Sciences, Seventh International Symposium on Structural Failure and Plasticity, 44, 1047-1065. https://doi.org/10.1016/S0020-7403(02)00013-9.
  6. de Lima, L.R.O., Guerrieiro, L.C.B., da S. Vellasco, P.C.G., Costa-Neves, L.F., da Silva, A.T. and Rodrigues, M.C. (2018), Experimental and numerical assessment of flange plate reinforcements on square hollow section T joints, Thin-Wall. Struct., 131, 595-605. https://doi.org/10.1016/j.tws.2018.07.053.
  7. ENV 1993-1-8 (2005), Eurocode 3: Design of steel structures - Part 1-8: Design of joints. CEN, Brussels, Belgium.
  8. Faella, C., Piluso, V. and RiZZano, G. (1998), "Experimental analysis of bolted connections: snug versus preloaded bolts", J. Struct. Eng., 124, 765-774. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(765).
  9. Gomes, F., Jaspart, J.P. and Maquoi, R. (1994), Behaviour of minor-axis joints and 3D joints, State of the Art Cost C1 Workshop.
  10. Gomes, N.V., de Lima, L.R.O., da S. Vellasco, P.C.G., da Silva, A.T., Rodrigues, M.C. and Costa-Neves, L.F. (2019), Experimental and numerical investigation of SHS truss T-joints reinforced with sidewall plates, Thin-Wall. Struct., 145, 106404. https://doi.org/10.1016/j.tws.2019.106404.
  11. Hadianfard, M.A. and RaZani, R. (2003), "Effects of semi-rigid behavior of connections in the reliability of steel frames", Struct. Saf., 25, 123-138. https://doi.org/10.1016/S0167-4730(02)00046-2.
  12. Jordao, S., Simoes da Silva, L. and Simoes, R. (2014), "Design formulation analysis for high strength steel welded beam-tocolumn joints", Eng. Struct., 70, 63-81. https://doi.org/10.1016/j.engstruct.2014.02.028.
  13. Lee, J., Goldsworthy, H.M. and Gad, E.F. (2010), "Blind bolted T-stub connections to unfilled hollow section columns in low rise structures", J. Constr. Steel Res., 66, 981-992. https://doi.org/10.1016/j.jcsr.2010.03.016.
  14. Li, M.X (2017), "Research on Cyclic Behavior and Design Method of Hollow Section Column-to-Beam Connections with Slip-Critical Blind Bolts", Master Dissertation, Tongji University, Shanghai.
  15. Park, A.Y. and Wang, Y.C. (2012), "Development of component stiffness equations for bolted connections to RHS columns", J. Constr. Steel Res., 70, 137-152. https://doi.org/10.1016/j.jcsr.2011.08.004.
  16. Qureshi, J., Mottram, J.T. (2013), "Behaviour of pultruded beam-to-column joints using steel web cleats", Thin-Wal. Struct., 73, 48-56. https://doi.org/10.1016/j.tws.2013.06.019.
  17. Shi, G., Chen, X. and Wang, D. (2017), "Experimental study of ultra-large capacity end-plate joints", J. Constr. Steel Res., 128, 354-361. https://doi.org/10.1016/j.jcsr.2016.09.001.
  18. Silva, L. a. P., Neves, L.F.N. and Gomes, F.C.T. (2003), "Rotational Stiffness of Rectangular Hollow Sections Composite Joints", J. Struct. Eng., 129, 487-494. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(487).
  19. Silva, L., Lima, L., Vellasco, P. and Andrade, S.A.L. (2004), "Behaviour of flush end-plate beam-to-column joints under bending and axial force", Steel Compos. Struct., 4(2), 77-94. https://doi.org/10.12989/scs.2004.4.2.077.
  20. Thai, H.T. and Uy, B. (2016), "Rotational stiffness and moment resistance of bolted endplate joints with hollow or CFST columns", J. Constr. Steel Res., 126, 139-152. https://doi.org/10.1016/j.jcsr.2016.07.005.
  21. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-hill, USA.
  22. Wang, J., Zhang, H. and Jiang, Z. (2016a), "Seismic behavior of blind bolted end plate composite joints to CFTST columns", Thin-Wall. Struct., 108, 256-269. https://doi.org/10.1016/j.tws.2016.08.013.
  23. Wang, J., Zhang, N. and Guo, S. (2016b), "Experimental and numerical analysis of blind bolted moment joints to CFTST columns", Thin-Wall. Struct., 109, 185-201. https://doi.org/10.1016/j.tws.2016.07.017.
  24. Wang, W., Li, M., Chen, Y. and Jian, X. (2017), "Cyclic behavior of endplate connections to tubular columns with novel slip-critical blind bolts", Eng. Struct., 148, 949-962. https://doi.org/10.1016/j.engstruct.2017.07.015.
  25. Wang, Z., Tao, Z., Li, D. and Han, L.-H. (2015), "Behaviour of novel blind-bolted joints with different strengthening components", Proceedings of the 11th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2015), Beijing, China, December.
  26. Wang, Z. and Wang, Q. (2016c), "Yield and ultimate strengths determination of a blind bolted endplate connection to square hollow section column", Eng. Struct., 111, 345-369. https://doi.org/10.1016/j.engstruct.2015.11.058.
  27. Wang, Z., Wang, Q., Liu, X. and Xue, H. (2016), "Yield line theory based loading capacity analytical model of bolted endplate connections to square hollow section columns", J. Build. Struct., 37(6), 160-173. https://doi.org/10.14006/j.jZjgxb.2016.06.020.
  28. Weynand, K., Jaspart, J.P. and Ly, L. (2003), Application of the component method to joints between hollow and open sections; Universite de Liege. http://hdl.handle.net/2268/23026.