Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Shear behavior of concrete-encased square concrete-filled steel tube members: Experiments and strength prediction

  • Yang, Yong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Chen, Xin (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Xue, Yicong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Yu, Yunlong (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Zhang, Chaorui (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • Received : 2020.10.03
  • Accepted : 2021.02.11
  • Published : 2021.02.25
⟨ Previous Next ⟩

Abstract

This paper presents experiments and theoretical analysis on shear behavior of eight concrete-encased square concrete-filled steel tube (CECFST) specimens and three traditional reinforced concrete (RC) specimens. A total of 11 specimens with the test parameters including the shear span-to-depth ratio, steel tube size and studs arrangement were tested to explore the shear performance of CECFST specimens. The failure mode, shear capacity and displacement ductility were thoroughly evaluated. The test results indicated that all the test specimens failed in shear, and the CECFST specimens enhanced by the interior CFST core exhibited higher shear capacity and better ductility performance than that of the RC specimens. When the other parameters were the same, the larger steel tube size, the smaller shear span-to-depth ratio and the existence of studs could lead to the more satisfactory shear behavior. Then, based on the compatible truss-arch model, a set of formulas were developed to analytically predict the shear strength of the CECFST members by considering the compatibility of deformation between the truss part, arch part and the steel tube. Compared with the calculated results based on several current design specifications, the proposed formulas could get more accurate prediction.

Keywords

References

  1. ACI 318 (2014), Building Code Requirements for Structural Concrete and Commentary; American Concrete Institute, USA.
  2. Alatshan, F., Osman, S.A., Mashiri, F. and Hamid, R. (2020), "Explicit simulation of circular CFST stub columns with external steel confinement under axial compression", Materials, 13(1), https://doi.org/10.3390/ma13010023.
  3. Al Zand, A.W., Badaruzzaman, W.H.W. and Tawfeeq, W.M. (2020), "New empirical methods for predicting flexural capacity and stiffness of CFST beam", J. Constr. Steel Res., 164(1), 105778.1-105778.15. https://doi.org/10.1016/j.jcsr.2019.105778.
  4. An, Y.F. and Han, L.H. (2014), "Behaviour of concrete-encased CFST columns under combined compression and bending", J. Constr. Steel Res., 101, 314-330. https://doi.org/10.1016/j.jcsr.2014.06.002
  5. Aoyama, H. (1993), "Design philosophy for shear in earthquake resistance in Japan", https://doi.org/10.1016/j.jcsr.2014.06.002.
  6. ASIC 360 (2016), Specification for structural steel buildings, American Institute of Steel Construction; Chicago, USA.
  7. CECS 188:2005 (2005), Technical Specification for Steel Tube Reinforced Concrete Column Structure, China Planning Press; Beijing, China.
  8. Choi, K.K., Park, H.G. and Wight, J.K. (2007), "Unified shear strength model for reinforced concrete beams-Part I: Development", ACI Struct. J., 104(2),142-152.
  9. Choi, K.K. and Park, H.G. (2007), "Unified shear strength model for reinforced concrete beams-Part II: Verification and simplified method", ACI Struct. J., 104(2), 153-161.
  10. Ekmekyapar, T., Alwan, O.H., Hasan, H.G., Shehab, B.A. and Al-Eliwi, B.J.M. (2019), "Comparison of classical, double skin and double section CFST stub columns: experiments and design formulations", J. Constr. Steel Res., 155(4), 192-204. https://doi.org/10.1016/j.jcsr.2018.12.025.
  11. Eom, S.S., Vu, Q.V. and Choi, J.H., Papazafeiropoulos, G. and Kim, S.E. (2019), "Behavior of composite CFST beam-steel column joints(Article)", Steel Compos. Struct., 32(5), 583-594. https://doi.org/10.12989/scs.2019.32.5.583.
  12. Eurocode 2 (1992), Design of concrete structures - Part 1 : General rules and rules for Buildings. European Committee for Standardization ; Brussels, European.
  13. Eurocode 3 (2005), Design of steel structures - Part 1-1 : General rules and rules for Buildings. European Committee for Standardization; Brussels, European.
  14. GB 50010-2010. Code for design of concrete structures, Ministry of Construction of China, Beijing, China; 2010 [in Chinese].
  15. GB 50917-2013. Code for Design of Steel and Concrete Composite Bridges, Ministry of Construction of China, Beijing, China; 2013 [in Chinese].
  16. Gao, D.Y., You, P.B., Zhang, L.J. and Yan, H.H. (2018), "Seismic behavior of SFRC shear wall with CFST columns". Steel Compos. Struct., 28(5), 527-539. https://doi.org/10.12989/scs.2018.28.5.527.
  17. Han, L.H., Li, W. and Bjorhovde, R. (2014), "Developments and advanced applications of concrete-filled steel tubular (CFST) structures: members", J. Constr. Steel Res., 100(9), 211-228. https://doi.org/10.1016/j.jcsr.2014.04.016.
  18. Han, L.H. and An, Y.F. (2014), "Performance of concrete-encased CFST box stub columns under axial compression", J. Constr. Steel Res., 93(2), 62-76. https://doi.org/10.1016/j.jcsr.2013.10.019.
  19. Hsu, T.T.C. and Mo, H.Y.L (2010), "Unified Theory of Concrete Structures", Wiley. https://doi.org/10.1002/9780470688892
  20. Khateeb, B.M., Siddiqui, N.A., Almusallam, T.H., Abbas, H. and Al-Salloum, Y.A. (2020), "Behavior of novel CFST circular column-to-foundation connections under cyclic loading", Eng. Struct., 221, 111051. https://doi.org/10.1016/j.engstruct.2020.111051.
  21. Kim, J.H. and Mander. J.B. (1999), "Truss modeling of reinforced concrete shear-flexure behavior", Multidisciplinary Center for Earthquake Engineering Research, Buffalo, USA.
  22. Lehman, D., Roeder, C., Heid, A., Maki, T. and Khaleghi, B. (2018), "Shear response of concrete filled tubes part 1: experiments", J. Constr. Steel Res., 150(11), 528-540. https://doi.org/10.1016/j.jcsr.2018.08.027.
  23. Li, W., Xu, L.F. and Qian, W.W. (2019), "Seismic performance of concrete-encased CFST column to steel beam joints with different connection details", Eng. Struct., 204, 109875. https://doi.org/10.1016/j.engstruct.2019.109875.
  24. Pan, Z. and Li, B. (2013), "Truss-arch model for shear strength of shear-critical reinforced concrete columns", J. Struct. Eng., 139(4), 548-560. https://doi.org/36.10.1061/(ASCE)ST.1943-541X.0000677.
  25. Patel, V.I., Hassanein, M.F., Thai, H.T., Abadi, H.A., Elchalakani, M. and Bai, Y. (2019), "Ultra-high strength circular short CFST columns: axisymmetric analysis, behaviour and design", Eng. Struct., 179(1), 268-283. https://doi.org/10.1016/j.engstruct.2018.10.081.
  26. Qian, W.W., Li, W., Han, L.H. and Zhao, X.L. (2016), "Analytical behavior of concrete-encased CFST columns under cyclic lateral loading", J. Constr. Steel Res., 120(4), 206-220. https://doi.org/11.10.1016/j.jcsr.2015.12.018.
  27. Xue, J., Zhou, C. and Lin, J. (2018), "Seismic performance of mixed column composed of square CFST column and circular RC column in Chinese archaized buildings", Steel Compos. Struct., 29(4), 451-464. https://doi.org/10.12989/scs.2018.29.4.451.
  28. Xue, Y.C., Yang, Y. and Yu, Y.L. (2020), "Shear strength model for steel reinforced concrete composite members: Short columns and deep beams", Eng. Struct., 216, 110748. https://doi.org/10.1016/j.engstruct.2020.110748.
  29. YB 9082-2006. Technical specification of steel-reinforced concrete structures. Beijing: Metallurgical Industry Press; 2006.
  30. Zarringol, M., Thai, H.T., Ngo, T. and Patel, V. (2020), "Behaviour and design calculations of rectangular CFST beam-columns with slender sections", Eng. Struct., 222, 111142. https://doi.org/10.1016/j.engstruct.2020.111142.
  31. Zhang, J., Li, X., Cao, W. and Yu, C. (2019), "Cyclic behavior of steel tube-reinforced high-strength concrete composite columns with high-strength steel bars", Eng. Struct., 189(6), 565-579. https://doi.org/17.10.1016/j.engstruct.2019.04.006.
  32. Zhou, K. and Han, L.H. (2019), "Modelling the behaviour of concrete-encased concrete-filled steel tube (CFST) columns subjected to full-range fire", Eng. Struct., 183, 265-280. https://doi.org/10.1016/j.engstruct.2018.12.100.