Advances in concrete construction

  • 제11권3호
  • /
  • Pages.207-217
  • /
  • 2021
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation towards strength properties of ternary blended concrete

  • Imam, Ashhad (Department of Civil Engineering, Vaugh Institute of Agriculture Engineering and Technology, SHUATS) ;
  • Moeeni, Shahzad Asghar (Department of Civil Engineering, Vaugh Institute of Agriculture Engineering and Technology, SHUATS) ;
  • Srivastava, Vikas (Department of Civil Engineering, Vaugh Institute of Agriculture Engineering and Technology, SHUATS) ;
  • Sharma, Keshav K (Department of Civil Engineering, NIT Jamshedpur)
  • 투고 : 2019.11.08
  • 심사 : 2021.01.26
  • 발행 : 2021.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study relates to a production of Quaternary Cement Concrete (QCC) prepared by using Micro Silica (MS), Marble Dust (MD) and Rice Husk Ash (RHA), followed by an investigation towards fresh and hardened properties of blended concrete. A total of 39 mixes were cast by incorporating different percentages of MS (6%, 7% and 8%), MD (5%, 10% and 15%) and RHA (5%, 10%, 15% and 20%) as partial replacement of Ordinary Portland Cement. The workability of fresh concrete was maintained in the range of 100±25 mm by adding 0.7% of Super Plasticizer in the mix. Optimum mechanical strength was observed at combination of 8% MS+5% MD+10% RHA. Marble dust replacement from 10 to 15% and Rice husk ash replacements from 15 to 20% depicted a substantial reduction in compressive strength at all ages. Durability parameter with respect to water absorption at 28 days shows an increasing trend as the percentage of blending increases.

키워드

참고문헌

  1. Abreu, A.G. and Dal-Molin, D.C.C. (1997), "Effect of silica fume addition on electric resistivity of normal strength concrete", IV Congresso Iberoamericano de Patologia das Constructoes, VI Congresso de Controle de Qualidade, Anais, 1, 201-208.
  2. AENOR. UNE - EN 197-1 (2000), Cement Part 1: Composition, Specifications and Conformity Criteria for Common Cements.
  3. Agarwal, S.K. and Gulati, D. (2006), "Utilization of industrial wastes and unprocessed micro-fillers for making cost effective mortars", Constr. Build. Mater., 20(10), 999-1004. https://doi.org/10.1016/j.conbuildmat.2005.06.009.
  4. Alam, J. and Akhtar, M.N. (2011), "Fly ash utilization in different sectors in Indian scenario", Int. J. Emerg. Trend. Eng. Develop., 1(1), 1-14.
  5. Almeida, N., Branco, F. and Santos, J.R. (2007), "Recycling of stone slurry in industrial activities: Application to concrete mixtures", Build. Envir., 42, 810-819. https://doi.org/10.1016/j.buildenv.2005.09.018.
  6. Alonso, M.C., Garcia Calvo, J.L., Sanchez, M. and Fernandez, A (2012), "Ternary mixes with high mineral additions contents and corrosion related properties", Mater. Corros., 63(12), 1-9. https://doi.org/10.1002/maco.201206654.
  7. Asociacion Marmol de Alicante (2013), http://www.marmoldealicante.es.
  8. Bai, J., Wild, S. and Sabir, B.B. (2002), "Sorptivity and strength of air-cured PC-PFA-MK concrete and the influence of binder composition on carbonation depth", Cement Concrete Res., 32, 1813-1821. https://doi.org/10.1016/S0008-8846(02)00872-4
  9. Boukhelkhal, A., Azzouz, L., Belaidi, A.S.E. and Benabed, B. (2016), "Effects of marble powder as a partial replacement of cement on some engineering properties of self compacting concrete", J. Adhes. Sci. Technol., 30(22), 2405-2419. https://doi.org/10.1080/01694243.2016.1184402.
  10. Centre for Studies and Experimentation of Public Works (CEDEX)-Ministerio de Fomento (2013), Usable Waste Catalogue under Construction.
  11. Chidambaram, N., Srikanth, J., Karthikeyan, B. and Dhinakaran, G. (2015), "Mechanical properties and micro structure characteristics of ternary blended concrete with ceramic powder and SiO2", Asian J. Scientif. Res., 8(3), 304-314. https://doi.org/10.3923/ajsr.2015.304.314
  12. Clear, C. (2006), "Forty year of UK cement manufacture 1966-2006", Concrete Magazine, 34-36.
  13. Delagrave, A., Pigeon, M., Marchand, J. and Revertegat, E. (1996), "Influence of chloride ions and pH level on the durability of high performance cements pastes (Part II)", Cement Concrete Res., 26(5), 749-760. https://doi.org/10.1016/S0008-8846(96)85012-5.
  14. Detwiler, D. and Mehta, J. (1989), "Chemical and physical effects of silica fume on the mechanical behaviour of concrete", ACI Mater. J., 86(6), 609-614.
  15. Dhinakaran, G. and Sreekanth, B. (2018), "Physical, mechanical, and durability properties of ternary blend concrete", Scientia Iranica A, 25(5), 2440-2450. https://doi.org/10.24200/SCI.2017.4210.
  16. Ghosh, S.P. and Roychowdhury, K.K. (2009), "The sustainability chain: climate change-global warming-clean development mechanism (CDM)-energy efficiency -carbon trading-Indian cement industry. NCB-CMA special publication", 11th NCB International Seminar on Cement and Building Materials, New Delhi, India, November.
  17. Grilo, M.J., Pereira, J. and Costa, C. (2013), "Waste marble dust blended cement", Mater. Sci. Forum, 671-676.
  18. Grilo, M.J., Pereira, J. and Costa, C. (2013), "Waste marble dust blended cement", Mater. Sci. Forum, 671-676.
  19. Heikal, M., Didamony, E. and Morsy, M.S. (2000), "Limestone filled pozzolanic cement", Cement Concrete Res., 30, 1827-1834. https://doi.org/10.1016/S0008-8846(00)00402-6.
  20. Isaia, C. (1995), "Effects of binary and ternary pozzolanic mixtures in high portland concrete: A durability study", Dissertation, S. Paulo, Polytechnic School of Universidade de Sao Paulo.
  21. Kavas, T. and Olgun, A. (2008), "Properties of cement and mortar incorporating marble dust and crushed brick", Ceramics-Silikaty, 52(1), 24-28.
  22. Khana, R., Jabbara, A., Ahmada, I., et al. (2012), "Reduction in environmental problems using rice-husk ash in concrete", Constr. Build. Mater., 30, 360-365. https://doi.org/10.1016/j.conbuildmat.2011.11.028.
  23. Madandoust, R., Ranjbar, M.M., Moghadam, H.A. and Mousavi, S.Y. (2011), "Mechanical properties and durability assessment of rice husk ash concrete", Biosyst. Eng., 110(2), 144-152. https://doi.org/10.1016/j.biosystemseng.2011.07.009.
  24. Mineral Product Association (MPA), Performance (2012), "A sector plan report from the UK cements industry", http://www.mineralproducts.org.
  25. Naveen, B.S. and Antil, Y. (2015), "Effect of rice husk on compressive strength of concrete", Int. J. Emerg. Technol., 6(1), 144-150.
  26. Newman, J. and Choo, B.S. (2003), Advanced Concrete Technology: Constituent Materials, Elsevier, Burlington MA.
  27. Praveen Kumar, V.V. and Prasada, D.R. (2019), "Influence of supplementary cementitious materials on strength and durability characteristics of concrete", Adv. Concrete Constr., 7(2), 75-85. http://dx.doi.org/10.12989/acc.2019.7.2.075.
  28. Ramasamy, V. (2012), "Compressive strength and durability properties of rice husk ash concrete", KSCE J. Civil Eng., 16(1), 93-102. https://doi.org/10.1007/s12205-012-0779-2.
  29. Rukzon, S. and Chindaprasirt, P. (2014), "Use of ternary blend of portland cement and two pozzolans to improve durability of high-strength concrete", KSCE J. Civil Eng., 18(6), 1745-1752. ttps://doi.org/10.1007/s12205-014-0461-y.
  30. Saraswathy, V. and Song, H. (2007), "Corrosion performance of rice husk ash blended concrete", Constr. Build. Mater., 21, 1779-1784. https://doi.org/10.1016/j.conbuildmat.2006.05.037.
  31. Sarkar, R.D., Mandal, S.K. and Maiti, H.S. (2006), "Phase and microstructure evolution during hydrothermal solidification of clay-quartz mixture with marble dust source of reactive lime", J. Eur. Ceram. Soc., 26(3), 297-304. https://doi.org/10.1016/j.jeurceramsoc.2004.11.006.
  32. Sidique, R. and Khan, M.I. (2011), Supplementary Cementing Materials. Springer, Verlag Berlin Heidelberg, 350.
  33. Sounthararajan, V.M. and Sivakumar, A. (2013), "Effect of the lime content in marble powder for producing high strength concrete", ARPN J. Eng. Appl. Sci., 8(4), 260-264.
  34. The European Cement Association (2012), Sustainable Cement Production: Co-processing of Alternative Fuels and Raw Materials in the European Cement Industry. http://www.cembureau.be.
  35. Thomas, M.D.A., Shehata, M.H., Shashiprakash, S.G., Hopkins, D.S. and Cail, K. (1999), "Use of ternary cementitious systems containing silica fume and fly ash in concrete", Cement Concrete Res., 29, 1207-1214. https://doi.org/10.1016/S0008-8846(99)00096-4.
  36. Tushir, S. and Mohit, K.G. (2016), "Effect of rice husk ash on split tensile strength of concrete", Int. J. Emerg. Technol., 7(1), 78-82. https://doi.org/10.1016/S0008-8846(99)00096-4.
  37. Veena, G.P. and Gulfam, P. (2014), "Feasibility and need of use of waste marble powder in concrete production", International Organisation of Scientific Research Journal of Mechanical and Civil Engineering, 23-26.
  38. Wolf, J. (1991), "Study about durability of high-performance concrete with silica fume addition", Master's Thesis, P. Alegre, Engineering School of Universidade Federal do Rio Grande do Sull.
  39. Wongkeo, W., Thongsanitgarn, P. and Chaipanich, A. (2012), "Compressive strength of binary and ternary blended cement mortars containing fly ash and silica fume under autoclaved curing", Adv. Mater. Res., 343-344, 316-321. https://doi.org/10.4028/www.scientific.net/AMR.343-344.316.