Computers and Concrete

  • 제27권3호
  • /
  • Pages.283-295
  • /
  • 2021
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A proposal for an approach for meso scale modeling for concrete based on rigid body spring model

  • Zhao, Chao (Hunan Provincial Key Laboratory of Structures for Wind Resistance and Vibration Control & School of Civil Engineering, Hunan University of Science and Technology) ;
  • Shi, Zheng (Hunan Provincial Key Laboratory of Structures for Wind Resistance and Vibration Control & School of Civil Engineering, Hunan University of Science and Technology) ;
  • Zhong, Xingu (Hunan Provincial Key Laboratory of Structures for Wind Resistance and Vibration Control & School of Civil Engineering, Hunan University of Science and Technology)
  • 투고 : 2020.09.17
  • 심사 : 2021.02.19
  • 발행 : 2021.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Existing meso-scale models of concrete need to refine the mesh grids of aggregate and cement mortar, which may greatly reduce the computational efficiency. To overcome this problem, a novel meso-scale modeling strategy, which is based on rigid body spring method and Voronoi diagram, is proposed in this study to establish the meso-scale model of concrete. Firstly, establish numerical aggregate models according to user-defined programs. Circle aggregates are adopted due to their high efficiency in generation and packing process, and the grading of aggregate are determined according to the distribution curve proposed by Full and Thompson; Secondly, extract the centroids of aggregates, and then develop the Voronoi diagram in which aggregate centroids are defined as initial scatters; Finally, establish the rigid body spring model for concrete based on the Voronoi diagram. Aggregates are represented by rigid blocks, and assumed to be unbreakable. Cement mortar is concentrated into the interface between adjacent blocks and represented by two uniform springs. The number of grids is consistent with that of aggregates in specimens, and no mesh-refinement of aggregates and cement mortar is required. The accuracy and efficiency of the proposed modeling strategy are firstly identified by comparing the numerical results with the experimental ones, and then the applicability of the proposed strategy with different volume percentage occupied by aggregates is investigated.

키워드

참고문헌

  1. Aoyagi, Y. and Yamada, K. (1983), "Strength and deformation characteristics of reinforced concrete shell elements subjected to in-plane forces", Proc. JPN Soc. Civil Eng., 331, 167-180. https://doi.org/10.2208/jscej1969.1983.331_167
  2. Burns, S.J. and Hanley, K.J. (2017), "Establishing stable time-steps for DEM simulations of non-collinear planar collisions with linear contact laws", Int. J. Numer. Meth. Eng., 110, 186-200. https://doi.org/10.1002/nme.5361.
  3. Chen, H., Xu, B., Mo, Y.L. and Zhou, T. (2018), "Behaviour of meso-scale heterogeneous concrete under uniaxial tensile and compressive loadings", Constr. Build. Mater., 178, 418-431. https://doi.org/10.1016/j.conbuildmat.2018.05.052.
  4. Contrafatto, L., Cuomo, M. and Gazzo, S. (2016), "A concrete homogenisation technique at meso-scale level accounting for damaging behaviour of cement paste and aggregates", Comput. Struct., 173, 1-18. https://doi.org/10.1016/j.compstruc.2016.05.009.
  5. Eddy, L. and Nagai, K. (2016), "Numerical simulation of beam-column knee joints with mechanical anchorages by 3D rigid body spring model", Eng. Struct., 126, 547-558. https://doi.org/10.1016/j.engstruct.2016.07.054.
  6. Haeri, H., Sarfarazi, V., Zhu, Z. and Marji, M.F. (2018), "Simulating the influence of pore shape on the Brazilian tensile strength of concrete specimens using PFC2D", Comput. Concrete, 22(5), 469-479. https://doi.org/10.12989/cac.2018.22.5.469.
  7. He, J., Pan, F., Cai, C.S., Habte, F. and Chowdhury, A. (2018), "Finite-element modelling framework for predicting realistic responses of light-frame low-rise buildings under wind loads", Eng. Struct., 164, 53-69. https://doi.org/10.1016/j.engstruct.2018.01.034.
  8. Li, D., Li, Z., Lv, C., Zhang, G. and Yin, Y. (2018), "A predictive model of the effective tensile and compressive strengths of concrete considering porosity and pore size", Constr. Build. Mater., 170, 520-526. https://doi.org/10.1016/j.conbuildmat.2018.03.028.
  9. Long, X. and Lee, C.K. (2015), "Improved strut-and-tie method for 2D RC beam-column joints under monotonic loading", Comput. Concrete, 15(5), 807-831. https://doi.org/10.12989/cac.2015.15.5.807.
  10. Lopez, C.M., Carol, I. and Aguado, A. (2008), "Meso-structural study of concrete fracture using interface elements. II: compression, biaxial and Brazilian test", Mater. Struct., 41, 601-620. https://doi.org/10.1617/s11527-007-9312-3.
  11. Luthfi, M.M., Zhuang, X.Y. and Rabczuk, T. (2018), "Computational modelling of fracture in encapsulation-based self-healing concrete using cohesive elements", Compos. Struct., 196, 63-75. https://doi.org/10.1016/j.compstruct.2018.04.066.
  12. Nguyen, T., Ghazlan, A., Kashani, A., Bordas, S. and Ngo, T. (2018), "3D meso-scale modelling of foamed concrete based on X-ray computed tomography", Constr. Build. Mater., 188, 583-598. https://doi.org/10.1016/j.conbuildmat.2018.08.085.
  13. Ostrowski, K., Sadowski, L., Stefaniuk, D., Walach, D., Gawenda, T., Oleksik, K. and Usydus, I. (2018), "The effect of the morphology of coarse aggregate on the properties of self-compacting high-performance fibre-reinforced concrete", Mater., 11(8), 1372. https://doi.org/10.3390/ma11081372.
  14. Ostrowski, K., Stefaniuk, D., Sadowski, L., Krzywinski, K., Gicala, M. and Rozanska, M. (2020), "Potential use of granite waste sourced from rock processing for the application as coarse aggregate in high-performance self-compacting concrete", Constr. Build. Mater., 238, 117794. https://doi.org/10.1016/j.conbuildmat.2019.117794.
  15. Rasmussen, L.L., de Farias, M.M. and de Assis, A.P. (2018), "Extended rigid body spring network method for the simulation of brittle rocks", Comput. Geotech., 99, 31-41. https://doi.org/10.1016/j.compgeo.2018.02.021.
  16. Ren, W., Yang, Z., Sharma, R., Zhang, C.H. and Withers, P.J. (2015), "Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete", Eng. Fract. Mech., 133, 24-39. https://doi.org/10.1016/j.engfracmech.2014.10.016.
  17. Roubin, E., Colliat, J.B. and Benkemoun, N. (2015), "Meso-scale modelling of concrete: A morphological description based on excursion sets of random fields", Comput. Mater. Sci., 102, 183-195. https://doi.org/10.1016/j.commatsci.2015.02.039.
  18. Sadowski, L., Hola, J., Czarnecki, L. and Mathia, T.G. (2021), "New paradigm in the metrology of concrete surface morphology: Methods, parameters and applications", Measure., 169, 108497. https://doi.org/10.1016/j.measurement.2020.108497.
  19. Sadowski, L., Nikoo, M. and Nikoo, M. (2018), "Concrete compressive strength prediction using the imperialist competitive algorithm", Comput. Concrete, 22(4), 355-363. https://doi.org/10.12989/cac.2018.22.4.355.
  20. Shen, M., Shi, Z., Zhao, C., Zhong, X., Liu, B. and Shu, X. (2019), "2-D meso-scale complex fracture modeling of concrete with embedded cohesive elements", Comput. Concrete, 24(3), 207-222. https://doi.org/10.12989/cac.2019.24.3.207.
  21. Skarzynski, L., Nitka, M. and Tejchman, J. (2015), "Modelling of concrete fracture at aggregate level using FEM and DEM based on X-ray μCT images of internal structure", Eng. Fract. Mech., 147, 13-35. https://doi.org/10.1016/j.engfracmech.2015.08.010.
  22. Talischi, C., Paulino, G.H. and Pereira, A. (2010), "Polygonal finite elements for topology optimization: A unifying paradigm", Int. J. Numer. Meth. Eng., 82, 671-698. https://doi.org/10.1002/nme.2763.
  23. Tekin, I., Birgul, R. and Aruntas, H.Y. (2018), "X-ray CT monitoring of macro void development in mortars exposed to sulphate attack", Comput. Concrete, 21(4), 367-376. https://doi.org/10.12989/cac.2018.21.4.367.
  24. Trawinski, W., Bohinski, J. and Tejchman, J. (2016), "Two-dimensional simulations of concrete fracture at aggregate level with cohesive elements based on X-ray μCT images", Eng. Fract. Mech., 168, 204-226. https://doi.org/10.1016/j.engfracmech.2016.09.012.
  25. Trawinski, W., Tejchman, J. and Bohinski, J. (2018), "A three-dimensional meso-scale modelling of concrete fracture based on cohesive elements and X-ray μCT images", Eng. Fract. Mech., 189, 27-50. https://doi.org/10.1016/j.engfracmech.2017.10.003.
  26. Walraven, J. and Reinhardt, H. (1981), "Theory and experiments on the mechanical behaviour of cracks in plain and reinforced concretes subjected to shear loading", Herony, 26, 26-33.
  27. Wang, Z.L., Gu, X.L. and Lin, F. (2011), "Experimental study on failure criterion of mortar under combined stresses", J. Build. Mater., 4(4), 235-245.
  28. Xu, Y. and Chen, S.H. (2016), "A method for modelling the damage behavior of concrete with a three-phase mesostructure", Constr. Build. Mater., 102, 26-38. https://doi.org/10.1016/j.conbuildmat.2015.10.151.
  29. Yilmaz, O. and Molinari, J.F. (2018), "A mesoscale fracture model for concrete", Cement Concrete Res., 97, 84-94. https://doi.org/10.1016/j.cemconres.2017.03.014.
  30. Yin, A., Yang, X., Zeng, G. and Gao, H. (2018), "Experimental and numerical investigation of fracture behaviour of asphalt mixture under direct shear loading", Constr. Build. Mater., 86, 21-32. https://doi.org/10.1016/j.conbuildmat.2015.03.099.
  31. Yin, A., Yang, X., Zhang, C., Zeng, G. and Yang, Z. (2015), "Three-dimensional heterogeneous fracture simulation of asphalt mixture under uniaxial tension with cohesive crack model", Constr. Build. Mater., 76, 103-117. https://doi.org/10.1016/j.conbuildmat.2014.11.065.
  32. Yu, J. and Li, F.M. (2017), "A meso-scale model for analysing the chloride diffusion of concrete subjected to external stress", Constr. Build. Mater., 130, 11-21. https://doi.org/10.1016/j.conbuildmat.2016.11.054.
  33. Zeng, G., Yang, X., Yin, A. and Bai, F. (2014), "Simulation of damage evolution and crack propagation in three-point bending pre-cracked asphalt mixture beam", Constr. Build. Mater., 55, 323-332. https://doi.org/10.1016/j.conbuildmat.2014.01.058.
  34. Zhang, Z., Song, X., Liu, Y., Wu, D. and Song, C. (2017), "Three-dimensional mesoscale modelling of concrete composites by using random walking algorithm", Compos. Sci. Technol., 149, 235-245. https://doi.org/10.1016/j.compscitech.2017.06.015.
  35. Zhao, C., Zhong, X., Liu, B., Shu, X. and Shen, M. (2018), "A modified RBSM for simulating the failure process of RC structures", Comput. Concrete, 21(1), 219-229. https://doi.org/10.12989/cac.2018.21.2.219.
  36. Zhong, X., Peng, X., Yan, S., Shen, M. and Zhai, Y. (2018), "Assessment of the feasibility of detecting concrete cracks in images acquired by unmanned aerial vehicles", Auto. Constr., 89, 49-57. https://doi.org/10.1016/j.autcon.2018.01.005.
  37. Zhong, X., Zhao, C., Liu, B., Shu, X. and Shen, M. (2018), "A 3-D RBSM for simulating the failure process of RC structures", Struct. Eng. Mech., 65(3), 291-302. https://doi.org/10.12989/SEM.2018.65.3.291
  38. Ziaei-Rad, V., Nouri, N., Ziaei-Rad, S. and Abtahi, M. (2012), "A numerical study on mechanical performance of asphalt mixture using a meso-scale finite element model", Finite Elem. Anal. Des., 57, 81-91. https://doi.org/10.1016/j.finel.2012.03.004.
  39. Ziaei-Rad, V., Nouri, N., Ziaei-Rad, S. and Abtahi, M. (2012), "A numerical study on mechanical performance of asphalt mixture using a meso-scale finite element model", Finite Elem. Anal. Des., 57, 81-91. https://doi.org/10.1016/j.finel.2012.03.004.