The Journal of Korean Academy of Prosthodontics (대한치과보철학회지)

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

Full mouth rehabilitation using transfer coping pick up impression in a patient with severe bleeding: A case report

출혈이 심한 환자에서 개별치아 인상채득후 트랜스퍼 코핑 픽업 인상법을 이용한 전악수복증례

  • Ha, Seung-Ryong (Department of Prosthodontics, School of Dentistry, Dankook University)
  • 하승룡 (단국대학교 치과대학 치과보철학교실)
  • Received : 2020.11.23
  • Accepted : 2020.12.28
  • Published : 2021.01.29
Download PDF
⟨ Previous Next ⟩

Abstract

In the case of excessively worn dentition, there is often insufficient space for the prosthesis, and if physiologically acceptable, the prosthesis can be fabricated by increasing the vertical dimension of occlusion. Various methods have been introduced to determine the vertical dimension of occlusion. Clinicians have to choose a method that can comfort the patient among several methods. A removable appliance can be used as a reversible method to ensure that the determined vertical dimension of occlusion does not cause physiological problems. When making impressions of many teeth, it is often difficult to make accurate impressions at once. In this case, after making an accurate impression of the individual teeth, a transfer coping was made and a pickup impression was taken in the oral cavity to create a master cast. In this case, a fixed partial denture was fabricated and full mouth rehabilitation was performed by increasing the vertical dimension of occlusion in a patient with excessively worn dentition and lack of space for restoration. As a result of follow-up of the patient for 7 years, satisfactory results were obtained both esthetically and functionally.

과도하게 마모된 치열의 경우 보철물이 들어갈 공간이 부족한 경우가 많으며, 생리적으로 허용되는 경우에는 교합을 거상해서 보철물을 제작할 수 있다. 결정된 교합고경이 생리적 문제를 일으키지 않는지 확인하는 가역적인 방법으로 가철성 장치를 이용할 수 있다. 여러 인접한 치아의 인상채득을 하는 경우에 한번에 정확한 인상채득을 만들어내기 어려운 경우가 많다. 이러한 경우에 개개 치아의 정확한 인상채득을 나눠서 시행한 후 하나의 작업모형을 만들기 위해 트랜스퍼 코핑을 제작하고 구강내에서 픽업인상을 채득하는 방법을 이용할 수 있다. 본 증례는 과도하게 마모된 치열을 지녀 보철수복 공간이 부족하고 출혈경향이 심한 환자에서, 개별치아의 인상채득 후 트랜스퍼 코핑 픽업인상법을 이용하여 작업모형을 만든 후, 교합고경을 거상시켜 고정성 보철물을 제작하여 전악수복한 환자를 7년의 추적 관찰 결과 심미적 및 기능적으로 만족스러운 결과를 얻었기에 보고하고자 한다.

Keywords

References

  1. Dawson PE. Functional occlusion-e-book: from TMJ to smile design. Elsevier Health Sciences; 2006.
  2. Beier US, Grunert I, Kulmer S, Dumfahrt H. Quality of impressions using hydrophilic polyvinyl siloxane in a clinical study of 249 patients. Int J Prosthodont 2007;20:270-4.
  3. Baba NZ, Goodacre CJ, Jekki R, Won J. Gingival displacement for impression making in fixed prosthodontics: contemporary principles, materials, and techniques. Dent Clin North Am 2014;58:45-68. https://doi.org/10.1016/j.cden.2013.09.002
  4. Donovan TE, Chee WWL. Curremt concepts in gingival displacement. Dent Clin North Am 2004;48:433-44. https://doi.org/10.1016/j.cden.2003.12.012
  5. Stewardson DA. Trends in indirect dentistry: 5. Impression materials and techniques. Dent Update 2005;32:374-6, 379-80, 382-4 passim. https://doi.org/10.12968/denu.2005.32.7.374
  6. Wassell RW, Barker D, Walls AW. Crowns and other extra-coronal restorations: impression materials and technique. Br Dent J 2002;192:679-84, 687-90. https://doi.org/10.1038/sj.bdj.4801456
  7. Abduo J, Lyons K. Clinical considerations for increasing occlusal vertical dimension: a review. Aust Dent J 2012;57:2-10. https://doi.org/10.1111/j.1834-7819.2011.01640.x
  8. Turner KA, Missirlian DM. Restoration of the extremely worn dentition. J Prosthet Dent 1984;52:467-74. https://doi.org/10.1016/0022-3913(84)90326-3
  9. Carlsson GE, Ingervall B, Kocak G. Effect of increasing vertical dimension on the masticatory system in subjects with natural teeth. J Prosthet Dent 1979;41:284-9. https://doi.org/10.1016/0022-3913(79)90008-8
  10. Dahl BL, Krogstad O. Long-term observations of an increased occlusal face height obtained by a combined orthodontic/prosthetic approach. J Oral Rehabil 1985;12:173-6. https://doi.org/10.1111/j.1365-2842.1985.tb00632.x
  11. Dahl BL, Krogstad O. The effect of a partial bite raising splint on the occlusal face height. An x-ray cephalometric study in human adults. Acta Odontol Scand 1982;40:17-24. https://doi.org/10.3109/00016358209019805
  12. Gross MD, Ormianer Z. A preliminary study on the effect of occlusal vertical dimension increase on mandibular postural rest position. Int J Prosthodont 1994;7:216-26.
  13. Ormianer Z, Gross M. A 2-year follow-up of mandibular posture following an increase in occlusal vertical dimension beyond the clinical rest position with fixed restorations. J Oral Rehabil 1998;25:877-83. https://doi.org/10.1046/j.1365-2842.1998.00326.x
  14. Ormianer Z, Palty A. Altered vertical dimension of occlusion: a comparative retrospective pilot study of tooth- and implant-supported restorations. Int J Oral Maxillofac Implants 2009;24:497-501.
  15. Donovan TE, Chee WW. A review of contemporary impression materials and techniques. Dent Clin North Am 2004;48:vi-vii, 445-70.
  16. Rubel BS. Impression materials: a comparative review of impression materials most commonly used in restorative dentistry. Dent Clin North Am 2007;51: 629-42. https://doi.org/10.1016/j.cden.2007.03.006
  17. Johnson GH, Lepe X, Aw TC. The effect of surface moisture on detail reproduction of elastomeric impressions. J Prosthet Dent 2003;90:354-64. https://doi.org/10.1016/S0022-3913(03)00429-3
  18. Sorensen JA, Doherty FM, Newman MG, Flemmig TF. Gingival enhancement in fixed prosthodontics. Part I: Clinical findings. J Prosthet Dent 1991;65:100-7. https://doi.org/10.1016/0022-3913(91)90059-6
  19. Nemetz H, Donovan T, Landesman H. Exposing the gingival margin: a systematic approach for the control of hemorrhage. J Prosthet Dent 1984;51:647-51. https://doi.org/10.1016/0022-3913(84)90410-4
  20. Laufer BZ, Baharav H, Cardash HS. The linear accuracy of impressions and stone dies as affected by the thickness of the impression margin. Int J Prosthodont 1994;7:247-52.
  21. Finger WJ, Kurokawa R, Takahashi H, Komatsu M. Sulcus reproduction with elastomeric impression materials: a new in vitro testing method. Dent Mater 2008;24:1655-60. https://doi.org/10.1016/j.dental.2008.03.025
  22. Baharav H, Laufer BZ, Langer Y, Cardash HS. The effect of displacement time on gingival crevice width. Int J Prosthodont 1997;10:248-53.
  23. Christensen GJ. Laboratories want better impressions. J Am Dent Assoc 2007;138:527-9. https://doi.org/10.14219/jada.archive.2007.0207
  24. Abdel Gabbar F, Aboulazm SF. Comparative study on gingival retraction using mechanochemical procedure and pulsed Nd = YAG laser irradiation. Egypt Dent J 1995;41:1001-6.
  25. Kamansky FW, Tempel TR, Post AC. Gingival tissue response to rotary curettage. J Prosthet Dent 1984;52:380-3. https://doi.org/10.1016/0022-3913(84)90449-9
  26. Brady WF. Periodontal and restorative considerations in rotary gingival curettage. J Am Dent Assoc 1982;105:231-6. https://doi.org/10.14219/jada.archive.1982.0104
  27. Howat AP, Capp NJ, Barrett NVJ. Color atlas of occlusion & malocclusion. Mosby Incorporated; 1991.