The Journal of Korean Academy of Prosthodontics (대한치과보철학회지)

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

Digital duplication of provisional prosthesis to fabricate definitive prosthesis for full mouth rehabilitation using double scan technique

잠정수복물의 최종수복물로의 디지털 복제를 통한 완전구강 회복 증례: Double scan technique

  • Hong, Young-Tack (Department of Prosthodontics, Seoul National University School of Dentistry) ;
  • Koak, Jai-Young (Department of Prosthodontics, Seoul National University School of Dentistry) ;
  • Kim, Seong-Kyun (Department of Prosthodontics, Seoul National University School of Dentistry) ;
  • Heo, Seong-Joo (Department of Prosthodontics, Seoul National University School of Dentistry)
  • 홍영택 (서울대학교 치과대학 치과보철학교실) ;
  • 곽재영 (서울대학교 치과대학 치과보철학교실) ;
  • 김성균 (서울대학교 치과대학 치과보철학교실) ;
  • 허성주 (서울대학교 치과대학 치과보철학교실)
  • Received : 2020.08.03
  • Accepted : 2020.10.26
  • Published : 2021.01.29
Download PDF
⟨ Previous Next ⟩

Abstract

Using computer-aided design and manufacturing technique improve quality of treatment in many aspect. This case reports the complete mouth rehabilitation of a patient with amelogenesis imperfecta utilizing digital technology. Clinical examination revealed loss of mastication due to insufficient occlusal stop, missing teeth, interdental spacing due to microdontia, insufficient overbite, and etc. Full veneer crowns for teeth were selected, followed by a fixed partial denture and implant placement was done using CAD-CAM guide template with bone graft for partially edentulous space. Definitive restorations were duplicated by double scanning provisional restorations and successfully delivered to the patient. These full mouth rehabilitation procedures resulted in satisfactory outcomes for the patient functionally and aesthetically.

CAD-CAM 기술의 사용은 다양한 부분에서 치료의 결과를 향상시킨다. 본 증례는 법랑질형 성부전증 환자를 디지털 기술을 이용해 치료한 전악구강회복 증례이다. 임상적 검사 결과 occlusal stop의 부재로 저작기능의 저하와 치아 상실, 왜소치로 인한 치간사이 공간, 불충분한 수직피개 등의 문제점이 파악되었다. 하악의 치아 상실 부위를 수복키 위해 CAD-CAM 수술 스텐트를 이용한 임플란트 식립이 진행되었고 추가적으로 부족한 골량을 보강하기 위해 골유도재생술이 동반되었다. 상하악 자연치는 모두 전장관수복을 통해 새로운 교합평면 설정 및 안정적인 수직교합관계를 형성하였다. ARCUS digma 장비를 통한 잠정수복물 평가 후 디지털 기술을 이용하여 잠정수복물 상태의 수복물을 더블스캔을 통한 복제를 하여 최종수복물을 제작, 환자에게 수복하여 전악수복을 완성하였다. 이를 통해 치료의 효율성과 예지성 있는 결과, 환자의 적응기간 감소와 기능적, 심미적으로 높은 만족도 등을 이루어냈다.

Keywords

References

  1. Kapos T, Ashy LM, Gallucci GO, Weber HP, Wismeijer D. Computer-aided design and computer-assisted manufacturing in prosthetic implant dentistry. Int J Oral Maxillofac Implants 2009;24:110-7.
  2. Becker CM, Kaiser DA. Surgical guide for dental implant placement. J Prosthet Dent 2000;83:248-51. https://doi.org/10.1016/S0022-3913(00)80018-9
  3. Sojka A, Huber J, Kaczmarek E, Hedzelek W. Evaluation of mandibular movement functions using instrumental ultrasound system. J Prosthodont 2017; 26:123-8. https://doi.org/10.1111/jopr.12389
  4. Crawford PJ, Aldred M, Bloch-Zupan A. Amelogenesis imperfecta. Orphanet J Rare Dis 2007;2:17. https://doi.org/10.1186/1750-1172-2-17
  5. Sanz-Sanchez I, Ortiz-Vigon A, Sanz-Martin I, Figuero E, Sanz M. Effectiveness of lateral bone augmentation on the alveolar crest dimension: A systematic review and meta-analysis. J Dent Res 2015;94: 128S-42S. https://doi.org/10.1177/0022034515594780
  6. Sarment DP, Sukovic P, Clinthorne N. Accuracy of implant placement with a stereolithographic surgical guide. Int J Oral Maxillofac Implants 2003;18:571-7.
  7. Shupe RJ, Mohamed SE, Christensen LV, Finger IM, Weinberg R. Effects of occlusal guidance on jaw muscle activity. J Prosthet Dent 1984;51:811-8. https://doi.org/10.1016/0022-3913(84)90382-2
  8. Curtis DA, Sharma A, Finzen FC, Kao RT. Occlusal considerations for implant restorations in the partially edentulous patient. J Calif Dent Assoc 2000;28: 771-9.
  9. Faria-e-Silva AL, De Moraes RR, Menezes Mde S, Capanema RR, De Moura AS, Martelli H Jr. Hardness and microshear bond strength to enamel and dentin of permanent teeth with hypocalcified amelogenesis imperfecta. Int J Paediatr Dent 2011;21:314-20. https://doi.org/10.1111/j.1365-263X.2011.01129.x
  10. Sun Y, Luebbers HT, Agbaje JO, Schepers S, Politis C, Van Slycke S, Vrielinck L. Accuracy of dental implant placement using CBCT-derived mucosa-supported stereolithographic template. Clin Implant Dent Relat Res 2015;17:862-70. https://doi.org/10.1111/cid.12189
  11. Schneider D, Schober F, Grohmann P, Hammerle CH, Jung RE. In-vitro evaluation of the tolerance of surgical instruments in templates for computer-assisted guided implantology produced by 3-D printing. Clin Oral Implants Res 2015;26:320-5.
  12. Stober T, Bermejo JL, Rammelsberg P, Schmitter M. Enamel wear caused by monolithic zirconia crowns after 6 months of clinical use. J Oral Rehabil 2014;41:314-22. https://doi.org/10.1111/joor.12139
  13. Sulaiman TA, Abdulmajeed AA, Donovan TE, Ritter AV, Vallittu PK, Narhi TO, Lassila LV. Optical properties and light irradiance of monolithic zirconia at variable thicknesses. Dent Mater 2015;31:1180-7. https://doi.org/10.1016/j.dental.2015.06.016
  14. Bremer F, Grade S, Kohorst P, Stiesch M. In vivo biofilm formation on different dental ceramics. Quintessence Int 2011;42:565-74.
  15. Roediger M, Gersdorff N, Huels A, Rinke S. Prospective evaluation of zirconia posterior fixed partial dentures: four-year clinical results. Int J Prosthodont 2010;23:141-8.
  16. Sailer I, Gottnerb J, Kanelb S, Hammerle CH. Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: a 3-year follow-up. Int J Prosthodont 2009;22:553-60.

Cited by

  1. Posterior dental implant prosthesis fabrication using double scanning technique: a case report vol.45, pp.3, 2021, https://doi.org/10.21851/obr.45.03.202109.156