DOI QR코드

DOI QR Code

Strength and Earth Pressure Characteristics of Industrial Disposal Flowable Filling Materials Utilizing Backfiller

뒤채움재로 사용된 산업폐기물 유동화 처리토의 강도 및 토압특성

  • Bang, Seongtaek (Department of Construction & Disaster Prevention Engineering, Kyungpook National University)
  • Received : 2020.09.18
  • Accepted : 2021.02.08
  • Published : 2021.03.01

Abstract

Due to population growth and industrial development, the amount of industrial waste is increasing every year. In particular, in a thermal power plant using finely divided coal, a large amount of coal ash is generated after combustion of the coal. Among them, fly ash is recycled as a raw material for cement production and concrete admixture, but about 20% is not utilized and is landfilled. Due to the continuous reclamation of such a large amount of coal ash, it is required to find a correct treatment and recycling plan for the coal ash due to problems of saturation of the landfill site and environmental damage such as soil and water pollution. In recent years, the use of a fluid embankment material that can exhibit an appropriate strength without requiring a compaction operation is increasing. The fluid embankment material is a stable treated soil formed by mixing solidifying materials such as water and cement with soil, which is the main material, and has high fluidity before hardening, so compaction work is not required. In addition, after hardening, it is used for backfilling or filling in places where compaction is difficult because higher strength and earth pressure reduction effect can be obtained compared to general soil. In this study, the possibility of use of fluidized soil using high water content cohesive soil and coal ash is considered. And it is intended to examine the flow characteristics, strength, and bearing capacity characteristics of the material, and to investigate the effect of reducing the earth pressure when applied to an underground burial.

인구증가와 산업발달로 산업폐기물의 발생량은 매년 증가하고 있으며, 미분된 석탄을 사용하는 화력발전소에서는 석탄의 연소 후에 많은 양의 석탄회가 발생된다. 이 중 비산재(fly ash)는 시멘트 제조 원료 및 콘크리트 혼화재 등으로 재활용되고 있으나, 약 20%는 활용되지 못하고 매립되고 있다. 이러한 많은 양의 석탄회가 지속적으로 매립됨으로 인해 매립지의 포화문제와 토양 및 수질오염 등의 환경오염 문제로 석탄회의 올바른 처리와 재활용 방안의 모색이 필요하다. 최근 지하구조물 공사와 고성토부의 교대 뒷채움 공사 등 장소가 협소하여 다짐작업이 어려운 공사가 증가하고 있으며 특히, 복토 및 뒤채움 작업은 굴착과정 중 자연지반의 교란을 수반하기 때문에 복토에 따른 철저한 다짐관리가 구조물과 지반의 안정에 필수적이다. 그러나 배후지반이 협소하거나 적절한 다짐장비의 부족, 과다짐으로 인한 구조물의 손상 등의 문제로 인하여 다짐관리가 어려운 실정이다. 따라서, 최근에는 다짐작업이 필요하지 않으면서도 적정한 강도를 발휘할 수 있는 유동성 성토재료의 사용이 증가하고 있다. 유동성 성토재료는 주재료인 토사에 물과 시멘트 등의 고화재를 혼합하여 조성된 안정처리토로서 경화되기 전에는 높은 유동성을 지니고 있어 다짐작업이 필요하지 않으며, 경화 후에는 일반 토사에 비해 높은 강도와 지중매설물에 작용하는 토압 감소효과를 얻을 수 있기 때문에 다짐이 곤란한 장소에서의 되메우기나 충전 등에 활용되고 있다. 본 연구에서는 고함수비의 점성토와 산업폐기물인 석탄회를 활용한 유동화 처리토의 사용 가능성을 평가하기 위하여 재료의 유동 특성, 강도, 지지력 특성을 분석하고 지중매설물에 적용 시 토압감소 효과를 규명하고자 한다.

Keywords

References

  1. ACI Commitee 229 (1994), Controlled low strength materials (CLSM), American Concrete Institute, 229R-2, pp. 1-12.
  2. ASTM (2004), Standard test method for flow consistency of controlled low strength material (CLSM), ASTM D 6103, pp. 1-3.
  3. Chae, D. H., Kim, K. O., Shin, H. Y. and Cho, W. J. (2014), Dynamic characteristics of liquidity filling materials mixed with reclaimed ash, Journal of the Korean Geo-Environmental Society, Vol. 15, No. 4, pp. 5-11 (In Korean).
  4. Jo, B. W., Park, J. B. and Koo, J. G. (2005), Experimental study for fracture characteristic of new building materials with recycled ash, Journal of the Korea Concrete Institute, Vol. 17, No. 2, pp. 255-261 (In Korean). https://doi.org/10.4334/JKCI.2005.17.2.255
  5. Jo, Y. K., Kim, C. S., Nam, S. Y., Jo, S. H., Lee, H. W. and Ahn, J. W. (2018), Properties evaluation and flowability of controlled low strength materials utilizing industrial by-products, Journal of Energy Engineering, Vol. 27, No. 4, pp. 64-69 (In Korean). https://doi.org/10.5855/ENERGY.2018.27.4.064
  6. Korea Coal Ash Recycling Association (2013).
  7. Marston, A. (1930), The theory of external loads on closed conduits in the light of the latest experiments, Bul, No. 96, Iowa Engineering Experiment Station, Ames, Iowa.
  8. Park, C. W., Lee, H. G. and Kang, T. S. (2010), Evaluation of durability characteristics of high performance shotcrete using fly ash, Journal of the Korea Concrete Institute, Vol. 22, No. 3, pp. 305-311 (In Korean). https://doi.org/10.4334/JKCI.2010.22.3.305
  9. Shin, B. W., Lee, J. K., Bang, S. T. and Yea, I. D. (2001), Earth pressure characteristics of flowable fill recycling disposal materials, Proceedings of Korean Geo-Environmental Society, pp. 47-52 (In Korean).
  10. Spangler, M. G. (1947), Underground conduits - An appraisal of modern research, Transaction ASCE, Vol. 113, June, pp. 316-374.
  11. White, H. L. and Layer, J. P. (1960), The corrugated metal conduit as a comression ring, Proc. HBR, Vol. 39, pp. 389-397.