DOI QR코드

DOI QR Code

Fragility evaluation of integral abutment bridge including soil structure interaction effects

  • Sunil, J.C. (CSIR-Structural Engineering Research Centre) ;
  • Atop, Lego (Department of Civil Engineering, Indian Institute of Technology) ;
  • Anjan, Dutta (Department of Civil Engineering, Indian Institute of Technology)
  • Received : 2020.03.19
  • Accepted : 2021.02.08
  • Published : 2021.02.25

Abstract

Contrast to the conventional jointed bridge design, integral abutment bridges (IABs) offer some marked advantages like reduced maintenance and enhanced service life of the structure due to elimination of joints in the deck and monolithic construction practices. However, the force transfer mechanism during seismic and thermal movements is a topic of interest owing to rigid connection between superstructure and substructure (piers and abutments). This study attempts to model an existing IAB by including the abutment backfill interaction and soil-foundation interaction effects using Winkler foundation assumption to determine its seismic response. Keeping in view the significance of abutment behavior in an IAB, the probability of damage to the abutment is evaluated using fragility function. Incremental Dynamic Analysis (IDA) approach is used in this regard, wherein, nonlinear time history analyses are conducted on the numerical model using a selected suite of ground motions with increasing intensities until damage to abutment. It is concluded from the fragility analysis results that for a MCE level earthquake in the location of integral bridge, the probability of complete damage to the abutment is minimal.

Keywords

References

  1. Allotey, N. and El Naggar, M.H. (2008a), "A numerical study into lateral cyclic nonlinear soil pile response", Canadian Geotech. J., 45(9), 1268-1281. https://doi.org/10.1139/T08-050.
  2. Allotey, N. and El Naggar, M.H. (2008b), "Generalized dynamic Winkler model for nonlinear soil structure interaction analysis", Canadian Geotech. J., 45(4), 560-573. https://doi.org/10.1139/T07-106.
  3. American Petroleum Institute (2007), Recommended practice for Planning, Designing and Constructing Fixed Offshore Platform - Working Stress Design, Transportation Research Board; API Publishing Services, Washington D.C, U.S.A.
  4. BA42 Highway Agency (2003), Design Manual for Integral Bridges: Design Manual for Road and Bridges, The Stationary Office London.
  5. Baker, J.W. (2015), "Efficient analytical fragility function fitting using dynamic structural analysis", Earthq. Spectra, 31(1), 579-599. https://doi.org/10.1193/02F021113EQS025M.
  6. Billah, A.H.M. and Alam, S. (2015), "Seismic fragility assessment of highway bridges: a state-of-the-art review", Struct. Infrastruct. Eng., 11(6), 804-832. https://doi.org/10.1080/15732479.2014.912243.
  7. Burke, M.P. Jr. (2009), Integral and Semi-Integral Bridges, John Wiley & Sons, Ltd.
  8. CALTRANS (2010), Seismic Design Criteria, CALTRANS, California, U.S.A.
  9. Chiou, J.S., Yang, H.H. and Chen, C.H. (2009), "Use of plastic hinge model in nonlinear pushover analysis of a pile", J. Geotech. Eng., 135(9), 1341-1345. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000015.
  10. Choi, E. (2002), Seismic analysis and retrofit of Mid-America bridges, Ph.D. Dissertation, Georgia Institute of Technology, Georgia, U.S.A.
  11. Clough, G.M. and Duncan, D.W. (1991), In: Fang HY Foundation Engineering Handbook, CBS Publishers, India.
  12. Cornell, A.C., Jayaler, F., Hamburger, R.O. and Foutch, A.D. (2002), "Probabilistic basis for 2000 SAC Federal Emergency Management Agency steel moment frame guidelines", J. Struct. Eng., 128(4), 526-533. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526).
  13. COSMOS Virtual Data Center (2021), https://strongmotioncenter.org/vdc/scripts/default.plx
  14. CSI (2015), Integrated software for structural analysis and design SAP2000 v.17.2.0, Computers and Structures Inc. Berkeley, U.S.A.
  15. Dhakal, R.P., Mander, J.B., Mashiko, N. and Solberg, K.M. (2007), "Incremental dynamic analysis applied to seismic financial risk assessment of bridges", Eng. Struct., 29(10), 2662-2672. https://doi.org/10.1016/j.engstruct.2006.12.015.
  16. Erhan, S. and Dicleli. M. (2014), "Effect of dynamic soil-bridge interaction modelling assumptions on the calculated seismic response of integral bridges", Soil Dyn. Earthq. Eng., 66, 42-55. https://doi.org/10.1016/j.soildyn.2014.06.033.
  17. Erhan, S. and Dicleli. M. (2015), "Comparative assessment of the seismic performance of integral and conventional bridges with respect to the differences at the abutments", Bull. Earthq. Eng., 13(2), 653-677. https://doi.org/10.1007/s10518-014-9635-8.
  18. Federal Emergency Management Agency (2003), HAZUS MR4: Technical Manual, Department of Homeland Security, U.S.A.
  19. Franchin, P. and Pinto, P.E. (2014), "Performance-based seismic design of integral abutment bridges", Bull. Earthq. Eng., 12, 939-960. https://doi.org/10.1007/s10518-013-9552-2.
  20. Gazetas, G. and Dobry, R. (1984), "Horizontal reponse of piles in layered soils", J. Geotech. Environ. Eng., 110, 20-40. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:1(20).
  21. Giberson, M.F. (1967), The Response of Nonlinear Multi Story Structures Subjected to Earthquake Excitation, Ph.D. Dissertation, California Institute of Technology, California, U.S.A.
  22. Griorios, T., Maria, P. and Stergios, M. (2019), "Response of integral abutment bridges under a sequence of thermal loading and seismic shaking", Earthq. Struct., 16(1), 11-28. https://doi.org/10.12989/eas.2019.16.1.011.
  23. IS 1893 Part 3 (2014), Criteria for Earthquake Resistant Design of Structures, Bureau of Indian Standards, India.
  24. Kappos, A.J., Panagopoulos, G., Panagiotopoulos, C. and Penelis, G. (2006), "A hybrid method for the vulnerability assessment of R/C and URM buildings", Bull. Earthq. Eng., 4, 391-413. https://doi.org/10.1007/s10518-006-9023-0.
  25. Kennedy, R.P., Cornell, C.A., Campbell, R.D., Kaplan, S. and Perla, H.F. (1980), "Probabilistic seismic safety study of an existing nuclear power plant", Nuclear Eng. Des., 59, 315-38. https://doi.org/10.1016/0029-5493(80)90203-4.
  26. Kim, S.H. and Shinozuka, M. (2004), "Development of fragility curves of bridges retrofitted by column jacketing", Prob. Eng. Mech., 19(1-2), 105-112. https://doi.org/10.1016/j.probengmech.2003.11.009.
  27. Kozak, D.L., LaFave, J.M. and Fahnestock, L.A. (2018), "Seismic modelling of integral abutment bridges in Illinois", Eng. Struct., 165, 170-183. https://doi.org/10.1016/j.engstruct.2018.02.088.
  28. Kramer, S.L. (1996), Geotechnical Earthquake Engineering, Prentice Hall.
  29. Lego, A. (2018), Seismic Response Control of Integral Abutment Bridge Using Sleeved Piles, Ph.D. Dissertation, Indian Institute of Technology, Guwahati, India.
  30. Mackie, K. and Stojadinovic, B. (2001), "Probabilistic seismic demand model for California highway bridges", J. Bridge Eng., 6(6), 468-480. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(468).
  31. Mackie, K. and Stojadinovic, B. (2005), Fragility Basis for California Highway Overpass Bridge Seismic Decision Making, Report No. 2005/02, Pacific Earthquake Engineering Research Center, University of California, Berkeley, U.S.A.
  32. Mander, J.B., Priestley M.J.N. and Park. R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  33. Maniyar, M.M. and Khare, R.K. (2011), "Selection of ground motion performing incremental dynamic analysis of existing reinforced concrete buildings in India", Current Sci., 100, 701-713. https://www.currentscience.ac.in/cs/Volumes/100/05/0701.pdf.
  34. Mistry, V.C. (2005), "Integral abutment and jointless bridges", Proceedings of the FHWA Conference on Integral Abutment and Jointless Bridges, Baltimore, Maryland.
  35. Nielson, B.G. (2005), Analytical Fragility Curves for Highway Bridges in Moderate Seismic Zones, Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, GA, U.S.A.
  36. Nogami T., Otani J., Konagai, K. and Chen H.L. (1992), "Nonlinear soil pile interaction model for dynamic lateral motion", J. Geotech. Geoenviron. Eng., 118(1), 89-106. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:1(89).
  37. Nogami, T. and Konagai, K. (1988), "Time domain flexural response of dynamically loaded single piles", J. Eng. Mech., 114(9), 1512-1525. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:9(1512).
  38. Pender, M.J. and Pranjoto, S. (2003), "Gapping effects on the lateral stiffness of piles in cohesive soils", In Proceedings of the 11th World Conference on Earthquake Engineering, Mexico.
  39. Polam, I.M., Kapuskar and Chaudhuri, D. (1998), Modelling of Pile Footings and Drilled Shafts for Seismic Design, Report No. 98-0018, Multidisciplinary Centre for Earthquake Engineering Research, MCEER, University of California, Berkeley, U.S.A.
  40. Porter, K., Kennedy, R. and Bachman, R. (2007), "Creating fragility functions for performance based earthquake engineering", Earthq. Spectra, 23(2), 471-489. https://doi.org/10.1193/1.2720892.
  41. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridges, Wiley, New York, U.S.A.
  42. Ramanathan, K.N. (2012), Next Generation Seismic Fragility Curves for California Bridges incorporating the evolution in Seismic Design philosophy, Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, U.S.A.
  43. Seismosoft (2006), A computer program for Response Spectrum Matching - SeismoMatch ver1.3.0. http://www.seismosoft.com
  44. Shome, N. and Cornell, A.C. (1999), Probabilistic Seismic Demand Analysis of Nonlinear Structures, Report No. 35, Reliability of Marine Structures Program, Department of Civil and Environmental engineering, Stanford University, C.A.
  45. Simon, J. and Vigh, L.G. (2016), "Seismic fragility assessment of integral precast multi-span bridges in areas of moderate seismicity", Bull. Earthq. Eng., 14, 3125-3150. https://doi.org/10.1007/s10518-016-9947-y.
  46. Song, S.T., Chai, Y.H. and Tom, H.H. (2004), "Limit state analysis of fixed-head concrete piles under lateral loads", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, B.C, Canada.
  47. Sritharan, S., Werff, J.V., Abendroth, R.E., Wassef, W.G. and Greimann, L.F. (2005), "Seismic behavior of a concrete/steel integral bridge pier system", J. Struct. Eng., 131(7), 1083-1094. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:7(1083).
  48. Vamvatsikos, D. and Cornell, C.A, (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31, 491-514. https://doi.org/10.1002/eqe.141.
  49. Wood, J.H. (2015), "Earthquake design of bridges with integral abutments", The 6th International Conference on Earthquake Geotechnical Engineering, Christchurch, New Zealand.
  50. Zhao, Q., Vasheghani-Farahani, R. and Burdette, E.G. (2011), "Seismic analysis of integral abutment bridges including soilstructure interaction", Struct. Congress, Las Vegas, https://doi.org/10.1061/41171(401)26.

Cited by

  1. Response modification factor and seismic fragility assessment of skewed multi-span continuous concrete girder bridges vol.20, pp.4, 2021, https://doi.org/10.12989/eas.2021.20.4.389