Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Punching Shear Safety of a Two-Way Void Plywood Slab System with Form

거푸집 패널이 부착된 2방향 중공슬래브의 뚫림 전단 안전성 평가

  • Received : 2021.09.24
  • Accepted : 2021.10.12
  • Published : 2021.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

VPS(Void Plywood Slab System, VPS) has optimized the shape of the hollow material. In addition, it has a function to prevent the floating of the hollow material and the separation due to the working load. In this study, the punching shear capacity of flat plate was performed using Void Plywood Slab System with form work panel proposed in the previous study. As a result of the test, the strength of the VSPS specimen in which the hollow material was placed beyond 2.0 times the column width from the loading point was reduced by 9.4% compared to the reference specimen. However, the strength value was about 1.57 times higher than the design value suggested by KBC 2016. It was found that there was no change in stiffness compared to the reference specimen until shear failure occurred in the VSPS specimen in which the hollow material was placed. It can be seen that this experiment is being destroyed by shear as the flexural reinforcing bars are sufficiently reinforced.

VPS는 중공재의 형상을 최적화 하고 중공재의 부상 및 작업하에 의한 이탈을 방지하는 기능을 가진 기존 중공슬래브공법이다. 본 연구에서는 기존연구에서 제안한 거푸집 패널이 부착된 중공슬래브(VPS)를 활용하여 플랫 플레이트의 뚫림전단 안전성을 검토하였다. 실험 결과, 가력점으로 부터 기둥 폭의 2.0배를 넘어 중공재를 배치한 VSPS 실험체는 기준 실험체에 대비 내력이 9.4%감소하였다. KBC2016에서 제시한 설계 값의 약 1.57배 이상의 강도 값을 나타내었다. 중공재를 배치한 VSPS 실험체가 전단파괴가 발생하기 전까지 기준 실험체 대비 강성의 변화는 없는 것으로 나타났다. 이는 휨 철근을 충분하게 배근하여 본 실험이 전단에 의해 파괴되고 있음을 알 수 있다.

Keywords

Acknowledgement

본 연구는 국토교통부 국토교통기술촉진연구사업(과제번호: N20CTAP-C157477-01)에 의한 연구 결과이며 이에 감사드립니다.

References

  1. Gardner, N. J., Huh, J. S., and Chung, L., (2002), Lessons from the Sampoong Department Store Colla, Cement & Concrete Composites, 24, 523-529. https://doi.org/10.1016/S0958-9465(01)00068-3
  2. Choi, C. S., Bae, B. I., Choi, Y, C., and Choi, H. G. (2012), The Effect of Anchorage with Shear Reinforcement in Flat Plate System, Journal of Korea Concrete Institute, 24(3), 667-675. https://doi.org/10.4334/JKCI.2012.24.6.667
  3. Choi, K. K., and Park, H. G. (2004), Strength Model for Punching Shear of Flat Plate-column Connections, Journal of Korea Concrete Institute, 16(2), 163-174. https://doi.org/10.4334/JKCI.2004.16.2.163
  4. Eom, T. S., Kang, S. M., Choi, T. W., and Park, H, G. (2018), Punching Shear Tests of Reinforced Concrete Slabs with High-strength Continuous Hoop Shear Reinforcement, ACI Structural Journal 115(5), 1259-1305.
  5. Kang, S. M., and Jang, J. I. (2018), Punching Shear Performance of Self-supporting Bar Truss for the Shear Reinforcement of Slab-column Connection, Journal of Korea Concrete Institute, 32(1), 53-64. https://doi.org/10.4334/jkci.2020.32.1.053
  6. Hur, M. W., Chae, K. H., Hwang, K. S., Yoon, S. H., and Park, T. W.(2021), Structural Performance of One-way Void Plywood Slab System with form work Panel, Journal of the Korea Institute for Structural Maintenance and Inspection, 25(1),7-15. https://doi.org/10.11112/JKSMI.2021.25.1.7
  7. Lee, Y. J., Kim, H. G., Kim, M. J., Kim, D. H., and Kim, K. H., (2020), Evaluation of Flexural Performance for Prestressed Concrete Hollow Core Slabs, Journal of the Korea Concrete Institute, 32(2), 193-200. https://doi.org/10.4334/jkci.2020.32.2.193
  8. Lee, Y. J., Kim, H. K., Kim, M. J., Lee, J. S., and Kim, K. H., (2019), Evaluation of Structural Performance for Prestressed Concrete Hollow Core Slabs, Journal of the Korea Concrete Institute, 31(5), 505-512. https://doi.org/10.4334/jkci.2019.31.5.505
  9. Park, M. K., Lee, D. H., Han, S. J., and Kim, K. D., (2019), Web-shear Capacity of Thick Precast Prestressed Hollow-core Slabs Units Produced by Extrusion Method, International Journal of Concrete Structures and Materials, 13(7), 19-32. https://doi.org/10.1186/s40069-018-0329-5
  10. Cho. G. Y., Park. Y. C., and Choi, C. S., (2018), An Experimental Study on the One-way Shear Strength of Void Slabs with Automatic Prefabrication of Welded Wire Truss, Journal of the Korea Concrete Institute, 30(3), 305-314. https://doi.org/10.4334/JKCI.2018.30.3.305
  11. ACI Committee 318, (2011), Building Code Requirements For Structural Concrete and Commentary.
  12. Korean Building and Commentary, (2016), Architectural Institute of Korea.
  13. Winhitech (2014), Void Deck Slab System Technical Report.
  14. Yoon, S. H., (2014), Structural Performance and Serviceability of Void Slabs with Deck Plate and Polystyrene Form, Ph. D. Dissertation, Dankook University, 16-20.
  15. Yoon, S. H., (2013), Hollow Slab Structure Using Multifunctional Rail and Construction Method Thereof Patent of Korea, 10-1318721.