과제정보
본 연구는 2021년도 산업통상자원부의 재원으로 한국에너지기술평가원(KETEP)의 에너지인력양성사업(No. 20194030202410) 및 2019년도 산업기술평가관리원(KEIT) 연구비 지원에 의한 성과임(20006868).
참고문헌
- Dong-Il Seo and Jae-Bong Lee, Ti-6Al-4V alloy fabricated by additive manufacturing method using microdroplet cell and critical pitting temperature techniques and evaluation of its resistance to corrosion, Corrosion Science and Technology, 17, 129 (2018. Doi: https://doi.org/10.14773/cst.2018.17.3.129
- Cheng, Xiaoliang, and Sharon G. Roscoe, Influence of surface polishing on the electrochemical behavior of titanium, Electrochemical and Solid State Letters, 8, B38 (2005). Doi: https://doi.org/10.1149/1.1996509
- Guangfang Chi, Danqing Yi, and Huiqun Liu, Effect of roughness on electrochemical and pitting corrosion of Ti6Al-4V alloy in 12 wt% HCl solution at 35 ℃, Journal of Materials Research and Technology, 9, 1162 (2020). Doi: https://doi.org/10.1016/j.jmrt.2019.11.044
- Danaila, Eliza, and Lidia Benea, The effect of surface roughness on corrosion behavior of Ti-6Al-4V alloy in saliva solution, 2015 E-Health and Bioengineering Conference (EHB), IEEE (2015).
- Jean-Yves Gal, Yannick Fovet, and Myriam Adib-Yadzi, About a synthetic saliva for in vitro studies, Talanta, 53, 1103 (2001). Doi: https://doi.org/10.1016/S0039-9140(00)00618-4
- Carolina Aurelia Ribeiro Maestro, , Marina Cristina Ferreira, Alysson Helton Santos Bueno, and Artur Mariano de Sousa Malafaia, Corrosion Resistance of Ti-6Al4V Machined Surfaces Improved by Thermal Oxidation, Engineering Journal, 24, 185 (2020). Doi: https://doi.org/10.4186/ej.2020.24.5.185
- Haijun Gong, H. Khalid Rafi, Thomas Starr, and Brent Stucker, The effects of processing parameters on defect regularity in Ti-6Al-4V parts fabricated by selective laser melting and electron beam melting, 24th annual international solid freeform fabrication symposium-an additive manufacturing conference, Austin, TX (2013). Doi: http://dx.doi.org/10.26153/tsw/15565
- Ross Cunningham, Sneha P. Narra, Tugce Ozturk, Jack Beuth and A. D. Rollett, Evaluating the effect of processing parameters on porosity in electron beam melted Ti-6Al4V via synchrotron X-ray microtomography, Jom, 68, 765 (2016). Doi: https://doi.org/10.1007/s11837-015-1802-0
- M. Simonelli, Y. Y. Tse, and C. Tuck, Microstructure of Ti-6Al-4V produced by selective laser melting, Journal of Physics: Conference Series, Vol. 371. No. 1., IOP Publishing (2012). Doi: https://doi.org/10.1088/1742-6596/371/1/012084
- Jing Bo Gao, Xiao Li Zhao, Ju Kun Yue, Meng Chao Qi, and De Liang Zhang, Microstructure and mechanical properties of Ti-6Al-4V alloy samples fabricated by selective laser melting, Key Engineering Materials, Vol. 770, pp. 179 - 186, Trans Tech PublicationsLtd. (2018). Doi: https://doi.org/10.4028/www.scientific.net/KEM.770.179
- J. Gunther, D. Krewerth, T. Lippmann, S. Leuders, T. Troster, A. Weidner, H. Biermann, and T. Niendorf, Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime, International Journal of Fatigue, 94, 236 (2017). Doi: https://doi.org/10.1016/j.ijfatigue.2016.05.018