Acknowledgement
본 논문은 안동대학교 기본연구지원사업에 의하여 연구되었습니다.
References
- Jongsoo Kim, Heesan Kim, Effects of Organic Additives on Residual Stress and Surface Roughness of Electroplated Copper for Flexible PCB, Corrosion Science and Technology, 6, 154 (2007). https://www.j-cst.org/opensource/pdfjs/web/pdf_viewer.htm?code=C00060400154
- Kang Yong Seok, Lee Kuk Hee, Shin Dong Man, Factors Affecting Stress Corrosion Cracking Susceptibility of Alloy 600 MA Steam Generator Tubes, Corrosion Science and Technology, 20, 22 (2021). Doi: https://doi.org/10.14773/cst.2021.20.1.22
- G. S. Schajer, Advances in Hole-Drilling Residual Stress Measurements, Experimental Mechanics, 50, 159, (2010). Doi: https://doi.org/10.1007/s11340-009-9228-7
- W. Woo, G. B. An, E. J. Kingston, A. T. DeWald, D. J. Smith, M. R. Hill, Through-thickness distributions of residual stresses in two extreme heat-input thick welds: A neutron diffraction, contour method and deep hole drilling study, Acta Materialia, 61, 3564 (2013). Doi: https://doi.org/10.1016/j.actamat.2013.02.034
- W.-D. Choi, D.-S. Gil, S.-G. Lee, Y.-H. Lee, A Study on the Comparative Evaluation of Welding Residual Stresses of Pipes in Power Plants using Saw-cutting and Indentation Methods, Journal of the Korean Society for Nondestructive Testing, 23, 328 (2003).
- J. H. Han, J. S. Lee, Y. H. Lee, M. J. Choi, G. J. Lee, K. H, Kim, D. Kwon, Residual Stress Estimation with Identification of Stress Directionality Using Instrumented Indentation Technique, Key Engineering Materials, 345-346, 1125 (2007). Doi: https://doi.org/10.4028/www.scientific.net/KEM.345-346.1125
- M.-J. Choi, S.-K. Kang, I. Kang, and D. Kwon, Evaluation of nonequibiaxial residual stress using Knoop indenter, Journal of Materials Research, 27, 121 (2012). Doi: https://doi.org/10.1557/jmr.2011.335
- Y.-C. Kim, H.-J. Ahn, D. Kwon, J.-Y. Kim, Modeling and experimental verification for non-equibiaxial residual stress evaluated by Knoop indentations, Metals and Materials International, 22, 12 (2016). Doi: https://doi.org/10.1007/s12540-015-5515-2
- W. J. Kim, Y. J. Kim, and Y.-C. Kim, Stress Conversion Factor Penetration Depth of Knoop Indentation for Assessment of Nano Residual Stress, Journal of the Microelectronics and Packaging Society, 26, 95 (2019). Doi: https://doi.org/10.6117/kmeps.2019.26.4.095
- Y.-H. Lee and D. Kwon, Estimation of biaxial surface stress by instrumented indentation with sharp indenters, Acta Materialia, 52, 1555 (2004). Doi: https://doi.org/10.1016/j.actamat.2003.12.006