Structural Engineering and Mechanics

  • 제77권1호
  • /
  • Pages.89-102
  • /
  • 2021
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural analysis of transverse joints of prefabricated T-girder bridge superstructure

  • Kye, Seungkyung (Applied Science Research Institute, Korean Advanced Institute for Science and Technology) ;
  • Jung, Hyung-Jo (Department of Civil and Environmental Engineering, Korean Advanced Institute for Science and Technology) ;
  • Park, Sun-Kyu (School of Civil, Architectural and Environmental Engineering, Sungkyunkwan University)
  • 투고 : 2020.06.01
  • 심사 : 2020.08.26
  • 발행 : 2021.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

Rapid construction of prefabricated bridges requires minimizing the field work of precast members and ensuring structural stability and constructability. In this study, we conducted experimental and analytical investigations of transverse joints of prefabricated T-girder bridge superstructures to verify the flexural performance and serviceability. In addition, we conducted parametric studies to identify the joint parameters. The results showed that both the segmented and continuous specimens satisfied the ultimate flexural strength criterion, and the segmented specimen exhibited unified behavior, with the flexural strength corresponding to that of the continuous specimen. The segmented specimens exhibited elastic behavior under service load conditions, and the maximum crack width satisfied the acceptance criteria. The reliability of the finite element model of the joint was verified, and parametric analysis of the convexity of the joint section and the compressive strength of the filler concrete showed that the minimum deflection and crack width occurred at a specific angle. As the strength of the filler concrete increased, the deflection and crack width decreased. However, we confirmed that the reduction in the crack width was hardly observed above a specific strength. Therefore, a design suitable for prefabricated bridges and accelerated construction can be achieved by improving the joint specifications based on the required criteria.

키워드

과제정보

This work was financially supported by the Korea Ministry of Land, Infrastructure and Transport (MOLIT) as 'Innovative Talent Education Program for Smart City', and the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (No. 2017R1A5A1014883).

참고문헌

  1. AASHTO (2017), LRFD Bridge Design Specifications, (8th Edition), American Association of State Highway and Transportation Officials, Washington, DC.
  2. ACI Standards (2015), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14), American Concrete Institute, Farmington Hills, MI, USA.
  3. Azizinamini, A., Darwin, D., Eligehausen, R., Pavel, R. and Ghosh, S.K. (1999), "Proposed modifications to ACI 318-95 tension development and lap splice for high-strength concrete", ACI Struct. J., 96(6), 922-926. https://doi.org/10.14359/766.
  4. Bangash, M.Y.H. (1989), Concrete and Concrete Structures: Numerical Modelling and Applications, Elsevier Applied Science, London, U.K.
  5. Bu, Z.Y., Ou, Y.C., Song, J.W. and Lee, G.C. (2016), "Hysteretic modeling of unbonded posttensioned precast bridge columns with circular section based on cyclic loading test", J. Bridg. Eng., 21(6), 1-14. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000902.
  6. Buyukozturk, O., Bakhoum, M.M. and Beattie, S.M. (1990), "Shear behavior of joints in precast concrete segmental bridges", J. Struct. Eng., 116, 3380-3401. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:12(3380)
  7. Chen, W.F. (2007), Plasticity in Reinforced Concrete, McGrawHill, New York, USA.
  8. Cho, C.G and Hotta, H. (2002), "A study on compressive strength of concrete in flexural regions of reinforced concrete beams using finite element analysis", Struct. Eng. Mech., 13(3), 313-328. https://doi.org/10.12989/sem.2002.13.3.313.
  9. Choi, J., Park, S.K., Kim, H.Y. and Hong, S. (2015), "Behavior of high-performance mortar and concrete connections in precast concrete elements: Experimental investigation under static and cyclic loadings", Eng. Struct., 100(2015), 633-644. https://doi.org/10.1016/j.engstruct.2015.06.009.
  10. Choi, J.W., Lee, S.S., Park, S.K. and Hong, S.N. (2014), "Evaluation of structural behavior and serviceability on transverse connection for modular slab bridge system", J. Korea Inst. Struct. Maint. Insp., 18(6), 139-146. https://doi.org/10.11112/jksmi.2014.18.6.139.
  11. Chung, C.H., Kang, M.G., Kim, I.K. and Shin, D.H. (2015), "Finite element analysis of precast deck joints", Comput. Struct. Eng., 28(2), 11-14.
  12. Chung, C.H., Sung, Y.E., Hyun, B.H. and Park, S.J. (2008), "Experimental study on connectability of half-depth precast deck panels with loop joint", J. Korean Soc. Civ. Eng., 28(4), 581-590.
  13. Dassault Systemes (2014), Abaqus Analysis User's Guide, vol. III.
  14. El Shahawy, M. (1990), "Feasibility study of transversely prestressed double tee bridges", PCI J., 35(5), 56-69. https://doi.org/10.15554/pcij.09011990.56.69
  15. Eurocode (2004), Design of concrete structures, European Committee for Standardization, Brussels, Belgium.
  16. Graybeal, B.A. (2010), "Behavior of ultra-high performance concrete connections between precast bridge deck elements", 2010 Concrete Bridge Conference: Achieving Safe, Smart and Sustainable Bridges, Phoenix, Arizona, February.
  17. Henin, E. and Morcous, G. (2015), "Non-proprietary bar splice sleeve for precast concrete construction", Eng. Struct., 83, 154-62. https://doi.org/10.1016/j.engstruct.2014.10.045.
  18. Hognestad, E. (1951), "A Study of Combined Bending and Axial Load in Reinforced Concrete Members", University of Illinois at Urbana Champaign, College of Engineering; Bulletin, No. 399, November.
  19. Issa, M.A., Ribeiro Do Valle, C.L., Abdalla, H.A., Islam, S. and Issa, M.A. (2003), "Performance of transverse joint grout materials in full-depth precast concrete bridge deck systems", PCI J., 48(4), 92-103. https://doi.org/10.15554/pcij.07012003.92.103
  20. Jang, I.Y., Park, H.G. and Yoon, Y.S. (1996), "A proposal of elastic modulus equation for high-strength and ultra-high-strength concrete", J. Korea Concr. Inst., 8(6), 213-222. https://doi.org/10.4334/IJCSM.2006.18.1E.043.
  21. Jang, I.Y., Park, H.G., Won, J.P. and Yoon, Y.S. (1997), "A study on the comparison and evaluation of the stress-strain relationships of high-strength and ultra high-strength concrete", J. Korea Concr. Inst., 9(4), 177-186.
  22. Jnaid, F. and Aboutaha, R.S. (2014), "Residual flexural strength of reinforced concrete beams with unbonded reinforcement", ACI Struct. J., 111, 1419-1430. https://doi.org/10.14359/51686975.
  23. Jung, W.C. and Lee, S.J. (2015), "Estimation of concrete crack width using a Commercial Software", Comput. Struct. Eng., 28(4), 49-64.
  24. Kang, J.O., Kim, K.S., Lee, D.H. and Lee, S.B. (2010), "Correlation between crack widths and deflection in reinforced concrete beams", J. Korea Inst. Struct. Maint. Insp., 14(2), 184-192. https://doi.org/10.11112/jksmi.2010.14.2.184.
  25. Kim, W.J. (1993), "Experimental research to develop P.C. joint design method", OTKNRKX40473; Housing Research Institute of Korea Housing Corporation.
  26. Kim, Y.J., Chung, C.H. and Kim, J.H. (1996), "Shear tests on female-to-female type joint between precast concrete bridge decks", J. Korea Concr. Inst., 10(6), 161-168.
  27. Korean Design Standard (2016a), Design Standard for Anchorage and Coupling of Concrete Structures (KDS 14 20 52), Korea Construction Standards Center; Gyeonggi-do, Republic of Korea.
  28. Korean Design Standard (2016b), Design Standard for Concrete Bridges (Ultimate Strength Design) (KDS 24 14 20), Korea Construction Standards Center; Gyeonggi-do, Republic of Korea.
  29. Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1973), "Behavior of Concrete Under Biaxial Stresses", J. Eng. Mech. Div., 99, 853-866. https://doi.org/10.1061/JMCEA3.0001789
  30. Kye, S. (2014), "Parametric analysis of modular T-girder bridge flange transverse joints by utilizing finite element method", M.Sc. Dissertation, Sungkyunkwan University, Korea.
  31. Lee, H.W., Barnes, R.W. and Kim, K.Y. (2004), "A continuity method for bridges constructed with precast prestressed concrete girders", Struct. Eng. Mech., 17(6), 879-898. https://doi.org/10.12989/sem.2004.17.6.879.
  32. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).
  33. Lee, J.M., Lee, S.Y., Song, J.J. and Park, K.H. (2015), "Static load tests on flexural strength and crack serviceability of a longitudinal joint for the slab-type precast modular bridges", J. Korea Concr. Inst., 27(2), 137-145. https://doi.org/10.4334/jkci.2015.27.2.137.
  34. Lee, S.Y., Song, J.J., Kim, H.Y., Lee, Y.H. and Lee, J.M. (2012), "Study on the shape of a longitudinal joint of the slab-type precast modular bridges", J. Korea Inst. Struct. Maint. Insp., 16(5), 98-111. https://doi.org/10.11112/jksmi.2012.16.5.098.
  35. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plasticdamage model for concrete", Int. J. Solids Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4.
  36. Moyo, P., Sibanda, B. and Beushausen, H. (2012), "Modelling and integrity assessment of shear connectors in precast cast-in-situ concrete bridges", Struct. Eng. Mech., 42(1), 55-72. https://doi.org/10.12989/sem.2012.42.1.055.
  37. Oh, H.C., Chung, C.H., Kang, M.G., Park, S.J. and Shin, D.H. (2016), "Evaluation on flexural performance of precast decks with ribbed joint by FEM", J. Korea Inst. Struct. Maint. Insp., 20(1), 85-94. https://doi.org/10.11112/jksmi.2016.20.1.085.
  38. Orakcal, K., Wallace, J.W. and Conte, J.P. (2004), "Flexural modeling of reinforced concrete walls-model attributes", ACI Struct. J., 101(5), 688-698.
  39. Park, J., Choi, J., Lee, H.M., Park, S.K. and Hong, S. (2015), "Evaluation of structural behavior and moment of inertia on modular slabs subjected to cyclic loading", J. Korea Inst. Struct. Maint. Insp., 19(6), 95-102. https://doi.org/10.11112/jksmi.2015.19.6.095.
  40. Park, W.Y., Kim, S.K. and Jang, I.Y. (2017), "An experimental study on transverse connection part of slab girder bridge fixed by clip unit", J. Korean Soc. Hazard Mitig., 17(5), 241-249. https://doi.org/10.9798/kosham.2017.17.5.241.
  41. Rombach, G.A. and Abendeh, R. (2008), "Bow-shaped segments in precast segmental bridges", Eng. Struct., 30(6), 1711-1719. https://doi.org/10.1016/j.engstruct.2007.11.012.
  42. Ronanki, V.S., Aaleti, S. and Binard, J.P. (2019), "Long-span hybrid precast concrete bridge girder using ultra-high-performance concrete and normalweight concrete", PCI J., 64(6), 45-61.
  43. Russell, H.G. and Graybeal, B.A. (2013), "Ultra-High Performance Concrete: A State-of-the-Art Report for the Bridge Community", FHWA-HRT-13-060; Henry G. Russell, Inc., IL, USA.
  44. Ryu, H.K., Kim, Y.J. and Chang, S.P. (2007), "Experimental study on static and fatigue strength of loop joints", Eng. Struct., 29(2), 145-162. https://doi.org/10.1016/j.engstruct.2006.04.014.
  45. Shufeng, L., Di, Z., Qingning, L., Huajing, Z., Jiaolei, Z. and Dawei, Y. (2020), "Research on prefabricated concrete beam-column joint with high strength bolt-end plate", Struct. Eng. Mech., 74(3), 395-406. https://doi.org/10.12989/sem.2020.74.3.395.
  46. Smith, M.Z., Li, Y. and Bulleit, W.M. (2011), "A method for evaluation of longitudinal joint connections of decked precast concrete girder bridges", Struct. Eng. Mech., 40(3), 297-313. https://doi.org/10.12989/sem.2011.40.3.297.
  47. Wells, Z.B. (2012), "Performance of Post-Tensioned Curved-Strand Connections in Transverse Joints of Precast Bridge Decks", M.Sc. Dissertation, Utah State University, Logan, USA.
  48. Yoon, T.Y. (2011), "Research and business development of modular bridge (Interim report)", TRKO201200009414, Research Institute of Industrial Science and Technology; Ministry of Land, Infrastructure and Transport, Korea.
  49. Yoon, T.Y. (2016), "Research & business development of modular bridge (Final report)", TRKO201700007401, Pohang Iron and Steel Company; Korea.
  50. Zhou, X., Mickleborough, N. and Li, Z. (2005), "Shear strength of joints in precast concrete segmental bridges", ACI Struct. J., 102, 3-11. https://doi.org/10.14359/13525.