Steel and Composite Structures

  • 제38권2호
  • /
  • Pages.223-239
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Axial behavior of steel reinforced lightweight aggregate concrete columns: Analytical studies

  • Mostafa, Mostafa M.A. (Structural Engineering Department, School of Civil Engineering, Chang'an University) ;
  • Wu, Tao (Structural Engineering Department, School of Civil Engineering, Chang'an University) ;
  • Fu, Bo (Structural Engineering Department, School of Civil Engineering, Chang'an University)
  • 투고 : 2019.05.20
  • 심사 : 2021.01.11
  • 발행 : 2021.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the analytical modeling and finite element (FE) analysis, using ABAQUS software, of the new types of steel reinforced lightweight aggregate concrete (SRLAC) columns with cross-shaped (+shaped and X-shaped) steel section, using proposed three analytical and two FE models in total. The stress-strain material models for different components in the columns, including the confined zones of the lightweight aggregate concrete (LWAC) using three and four concrete zones divisions approaches and with and without taking into account the stirrups reaction effect, are established first. The analytical models for determining the axial load-deformation behavior of the SRLAC columns are drawn based on the materials models. The analytical and FE models' results are compared with previously reported test results of the axially loaded SRLAC columns. The proposed analytical and FE models accurately predict the axial behavior and capacities of the new types of SRLAC columns with acceptable agreements for the load-displacement curves. The LWAC strength, steel section ratio, and steel section configuration affect the contact stress between the concrete and steel sections. The average ratios of the ultimate test load to the three analytical models and FEA model loads, Put /Pa1, Put /Pa2, Put /Pa3, and Put /PFE1, for the tested specimens are 0.96, 1.004, 1.016, and 1.019, respectively. Finally, the analytical parametric studies are also studied, in terms of the effects of confinement, LWAC strength, steel section ratio, and the reinforcement ratio on the axial capacity of the SRLAC column. When concrete strength, confinements, area of steel sections, or reinforcement bars ratio increased, the axial capacities increased.

키워드

과제정보

The first author would like to thank the Chinese Scholarship Council (CSC) and the Egyptian Ministry of Higher Education for supporting his Ph.D. degree scholarship.

참고문헌

  1. ACI-213R-03 (2003), Guide for Structural Lightweight-Aggregate Concrete, American Concrete Institute, USA.
  2. AL-Eliwi, B.J., Ekmekyapar, T., Faraj, R.H., Gogus, M.T. and AL-Shaar, A.A. (2017), "Performance of lightweight aggregate and self-compacted concrete-filled steel tube columns", Steel. Compos. Struct., 25(3), 299-314. https://doi.org/10.12989/scs.2017.25.3.299.
  3. Al-Shahari, A.M., Hunaiti, Y.M. and Ghazaleh, B.A. (2003), "Behavior of lightweight aggregate concrete-encased composite columns", Steel. Compos. Struct., 3(2), 97-110. https://doi.org/10.12989/scs.2003.3.2.097.
  4. An, G.-H., Seo, J.-K., Cha, S.-L. and Kim, J.-K. (2018), "An experimental and numerical study on long-term deformation of SRC columns", Comput. Concrete, 22(3), 261-267. https://doi.org/10.12989/cac.2018.22.3.261.
  5. Birtel, V. and Mark, P. (2006). "Parameterised finite element modelling of RC beam shear failure", ABAQUS Users' Conference.
  6. Campian, C., Nagy, Z. and Pop, M. (2015), "Behavior of fully encased steel-concrete composite columns subjected to monotonic and cyclic loading", Procedia Eng., 117, 439-451. https://doi.org/10.5937/jaes12-5672.
  7. Chen, C. and Lin, N. (2006), "Analytical model for predicting axial capacity and behavior of concrete encased steel composite stub columns", J. Constr. Steel Res., 62(5), 424-433. https://doi.org/10.1016/j.jcsr.2005.04.021.
  8. Chen, S. and Wu, P. (2017), "Analytical model for predicting axial compressive behavior of steel reinforced concrete column", J. Constr. Steel Res., 128, 649-660. https://doi.org/10.1016/j.jcsr.2016.10.001.
  9. Chicoine, T., Tremblay, R. and Massicotte, B. (2002), "Finite element modelling and design of partially encased composite columns", Steel. Compos. Struct., 2(3), 171-194. https://doi.org/10.12989/scs.2002.2.3.171.
  10. Chin, Y.S. (2009), "Stress-strain behavior of highly confined concrete in SRC Stub columns", Master Thesis, National Taiwan University of Science and Technology, Taipei, Taiwan. [in Chinese]
  11. de-Sousa, J.B.M. and Caldas, R.B. (2005), "Numerical analysis of composite steel-concrete column of arbitrary cross section", J. Struct. Eng., 131(11), 1721-1730. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1721).
  12. De Nardin, S. and El Debs, A. (2007), "Shear transfer mechanisms in composite columns: an experimental study", Steel. Compos. Struct., 7(5), 377-390. https://doi.org/10.12989/scs.2007.7.5.377.
  13. Du, Q. (2016), "Finite Element Modelling of Steel/Concrete Bond for Corroded Reinforcement", Master Thesis, Universite d'Ottawa/University of Ottawa, Qixin Du, Ottawa, Canada.
  14. ECP-203 (2018), Egyptian code of practice for design and construction of concrete structures, Housing and Building National Research Center (HBRC), Cairo, Egypt.
  15. El-Tawil, S. and Deierlein, G.G. (1999), "Strength and ductility of concrete encased composite columns", J. Struct. Eng., 125(9), 1009-1019. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(1009).
  16. Ellobody, E., Alfazari, S., Alghafri, W. and Aladawi, A. (2018), "Eccentrically loaded SFRC-filled stainless steel columns", Struct. Build., 172(7), 1751-7702. https://doi.org/10.1680/jstbu.17.00165.
  17. Ellobody, E. and Young, B. (2011), "Numerical simulation of concrete encased steel composite columns", J. Constr. Steel Res., 67(2), 211-222. https://doi.org/10.1016/j.jcsr.2010.08.003.
  18. Ellobody, E., Young, B. and Lam, D. (2006), "Behaviour of normal and high strength concrete-filled compact steel tube circular stub columns", J. Constr. Steel Res., 62(7), 706-715. https://doi.org/10.1016/j.jcsr.2005.11.002.
  19. Ellobody, E., Young, B. and Lam, D. (2011), "Eccentrically loaded concrete encased steel composite columns", Thin Wall. Struct., 49(1), 53-65. https://doi.org/10.1016/j.tws.2010.08.006.
  20. Elzien, A., Ji, B., Fu, Z. and Hu, Z. (2011), "The behavior of lightweight aggregate concrete filled steel tube columns under eccentric loading", Steel. Compos. Struct., 11(6), 469-488. https://doi.org/10.12989/scs.2011.11.6.469.
  21. Fang, L., Zhang, B., Jin, G.F., Li, K.W. and Wang, Z.L. (2015), "Seismic behavior of concrete-encased steel cross-shaped columns", J. Constr. Steel Res., 109 24-33. https://doi.org/10.1016/j.jcsr.2015.03.001.
  22. Fukuhara, M. and Minami, K. (2008). "Seismic performance of new type steel-concrete composite structures considering characteristic both SRC and CFT structures", Proceedings of 14th World Conference on Earthquake Engineering, Beijing, China, October.
  23. Ghannam, S., Jawad, Y.A. and Hunaiti, Y. (2004), "Failure of lightweight aggregate concrete-filled steel tubular columns", Steel. Compos. Struct., 4(1), 1-8. https://doi.org/10.12989/scs.2004.4.1.001.
  24. Khan, A. (2002), "Composite behaviour of normal weight and lightweight concrete panels with partially embedded light-gauge steel channels", Master Thesis, University of New Brunswick
  25. Kim, C.S., Park, H.G., Chung, K.S. and Choi, I.R. (2012), "Eccentric Axial Load Testing for Concrete-Encased Steel Columns Using 800 MPa Steel and 100 MPa Concrete", J. Struct. Eng., 138(8), 1019-1031. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000533.
  26. Kratzig, W.B. and Polling, R. (2004), "An elasto-plastic damage model for reinforced concrete with minimum number of material parameters", Comput. Struct., 82(15), 1201-1215. https://doi.org/10.1016/j.compstruc.2004.03.002.
  27. Lai, B., Liew, J.R. and Wang, T. (2019), "Buckling behaviour of high strength concrete encased steel composite columns", J. Constr. Steel Res., 154 27-42. https://doi.org/10.1016/j.jcsr.2018.11.023.
  28. Liang, C.Y., Chen, C., Weng, C., Yin, Y. and Wang, J. (2014), "Axial compressive behavior of square composite columns confined by multiple spirals", J. Constr. Steel Res., 103(103), 230-240. https://doi.org/10.1016/j.jcsr.2014.09.006.
  29. Liu, B., Bai, G.L., Xu, Z.H., Ma, J.F. and Han, Y.Y. (2019), "Experimental study and finite element modeling of bond behavior between recycled aggregate concrete and the shaped steel", Eng. Struct., 201(2019), 109840. https://doi.org/10.1016/j.engstruct.2019.109840.
  30. Liu, X., Liu, Y., Wu, T. and Wei, H. (2020), "Bond-slip properties between lightweight aggregate concrete and rebar", Constr. Build. Mater., 255 119355. https://doi.org/10.1016/j.conbuildmat.2020.119355.
  31. Mander, J.B., Priestley, M.J.N. and Park, R. (1988a), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  32. Mander, J.B., Priestley, M.J.N. and Park, R. (1988b), "Observed Stress-Strain Behavior of Confined Concrete", J. Struct. Eng., 114(8), 1827-1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827).
  33. Mirza, S.A. and Skrabek, B. (1992), "Statistical analysis of slender composite beam-column strength", J. Struct. Eng., 118(5), 1312-1332. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1312).
  34. Morino, S. (1998), "Recent developments in hybrid structures in Japan-research, design and construction", Eng. Struct., 20(4-6), 336-346. https://doi.org/10.1016/S0141-0296(97)00022-9.
  35. Mostafa, M.M.A., Wu, T., Liu, X. and Fu, B. (2019), "The composite steel reinforced concrete column under axial and seismic loads: A review", Int. J. Steel. Struct., 19(6), 1969-1987. https://doi.org/10.1007/s13296-019-00257-9.
  36. Mostafa, M.M.A., Wu, T., Liu, X. and Fu, B. (2021), "Axial behavior of the steel reinforced lightweight aggregate concrete (SRLAC) columns", Steel. Compos. Struct., Under consideration by the journal.
  37. Nematzadeh, M. and Ghadami, J. (2017), "Evaluation of interfacial shear stress in active steel tube-confined concrete columns", Comput. Concrete, 20(4), 469-481. https://doi.org/10.12989/cac.2017.20.4.469.
  38. Nguyen, H.T. and Kim, S.E. (2009), "Finite element modeling of push-out tests for large stud shear connectors", J. Constr. Steel Res., 65(10), 1909-1920. https://doi.org/10.1016/j.jcsr.2009.06.010.
  39. Rashad, A.M. (2018), "Lightweight expanded clay aggregate as a building material-An overview", Constr. Build. Mater., 170 757-775. https://doi.org/10.1016/j.conbuildmat.2018.03.009.
  40. Sheikh, S.A. and Uzumeri, S. (1982), "Analytical model for concrete confinement in tied columns", J. Struct. Div., 108(12), 2703-2722. https://doi.org/10.1061/JSDEAG.0006100
  41. Stefan, R., Sura, J., Prochazka, J., Kohoutkova, A. and Wald, F. (2019), "Numerical investigation of slender reinforced concrete and steel-concrete composite columns at normal and high temperatures using sectional analysis and moment-curvature approach", Eng. Struct., 190, 285-305. https://doi.org/10.1016/j.engstruct.2019.03.071.
  42. Tan, E.L., Thomas, C. and Siriviatnanon, V. (2013), "Finite element modeling of nonlinear behaviour of headed stud shear connectors in foamed and lightweight aggregate concrete", Proceedings of the Fifth International Conference on Advances in Experimental Structural Engineering (I), Taipei, Taiwan, November.
  43. Thorenfeldt, E. (1995), "Design criteria of lightweight aggregate concrete", Proceedings of CEB/FIP International Symposium on Structural Lightweight Aggregate Concrete, Sandefjord, Norway, Jun.
  44. Tokgoz, S. and Dundar, C. (2008), "Experimental tests on biaxially loaded concrete-encased composite columns", Steel. Compos. Struct., 8(5), 423-438. https://doi.org/10.12989/scs.2008.8.5.423
  45. Wang, Q., Shi, Q. and Tao, Y. (2016), "Experimental and numerical studies on the seismic behavior of steel reinforced concrete compression-bending members with new-type section steel", Adv. Struct. Eng., 19(2), 255-269. https://doi.org/10.1177/1369433215624320.
  46. Wang, Q., Shi, Q. and Tian, H. (2015), "Seismic behavior of steel reinforced concrete (SRC) joints with new-type section steel under cyclic loading", Steel. Compos. Struct., 19(6), 1561-1580. https://doi.org/10.12989/scs.2015.19.6.1561.
  47. Zhao, X., Wen, F., Chan, T.-M. and Cao, S. (2019), "Theoretical stress-strain model for concrete in steel-reinforced concrete columns", J. Struct. Eng., 145(4), 04019009. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002289.
  48. Zheng, S., Liu, Y., Yoda, T. and Lin, W. (2016), "Parametric study on shear capacity of circular-hole and long-hole perfobond shear connector", J. Constr. Steel Res., 117, 64-80. https://doi.org/10.1016/j.jcsr.2015.09.012.