Steel and Composite Structures

  • 제41권6호
  • /
  • Pages.887-898
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Inelastic large deflection analysis of space steel frames consisting of I-shaped cross section

  • ElSabbagh, Ashraf (Department of Civil Engineering, Faculty of Engineering, Port Said University) ;
  • Hanefa, Ahmed (Department of Civil Engineering, Faculty of Engineering, Port Said University) ;
  • Zubydan, Ahmed (Department of Civil Engineering, Faculty of Engineering, Port Said University) ;
  • ElGhandour, Mohamed (Department of Civil Engineering, Faculty of Engineering, Port Said University) ;
  • Sharaf, Tarek (Department of Civil Engineering, Faculty of Engineering, Port Said University)
  • 투고 : 2021.04.26
  • 심사 : 2021.11.10
  • 발행 : 2021.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a simplified model to capture the nonlinear behavior of steel frames depending on the spread of plasticity method. New interaction formulae were derived to evaluate the plastic strength for I-shaped steel sections under uniaxial bending moment and axial compression load. Also, new empirical formulae were derived to evaluate the tangent stiffness modulus of steel I-shaped cross-sections considering the effect of the residual stresses suggested by the specifications in European Convention for Construction Steelworks (ECCS). The secant stiffness which depends on the tangent modulus is used to evaluate the internal forces. Based on stiffness matrix method, a finite element analysis program was developed for the nonlinear analysis of space steel frames using the derived formulae. Comparison between the proposed model results with those given by the fiber model shows very good agreement. Numerical examples were introduced to verify, check the accuracy, and evaluate the efficiency of the proposed model. The analysis results show that the new proposed model is accurate and able to minimize the solution time.

키워드

참고문헌

  1. AISC 360-16 (2016), Specifications for structural steel buildings, American Institute of Steel Construction; Chicago, USA.
  2. Bishay-Girges, N.W. (2020), "Improved steel beam-column connections in industrial structures", Eng. Technol. Appl. Sci. Res., 10(1), 5126-5131. https://doi.org/10.48084/etasr.3248
  3. ECCS (1991), Essentials of Eurocode 3: Design Manual for Steel Structures in Building, European Convention for Constructional Steelwork; Brussels, Belgium.
  4. Eurocode (2005), Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings, European Committee for Standardization; Brussels, Belgium.
  5. Farag, A.E. (2017), "Inelastic large deflection analysis of steel space frames using an equivalent accumulated element", MSc. Dissertation, Port Said University, Port Said.
  6. Konkong, N. (2017), "An investigation on the ultimate strength of cold-formed steel bolted connections", Eng. Technol. Appl. Sci. Res, 7(4), 1826-1832. https://doi.org/10.48084/etasr.1243
  7. Liu, S.W., Liu, Y.P. and Chan, S.L. (2014), "Direct analysis by an arbitrarily- plastic-hinge element - part 1: planar analysis", J. Constr. Steel Res., 103, 303-315. https://doi.org/10.1016/j.jcsr.2014.07.009.
  8. McKinstray, R., Lim, J.B., Tanyimboh, T.T., Phan, D.T. and Sha, W. (2015), "Optimal design of long-span steel portal frames using fabricated beams", J. Constr. Steel Res., 104, 104-114. https://doi.org/10.1016/j.jcsr.2014.10.010.
  9. Nguyen, P.C. and Kim, S.E. (2015), "Second-order spread-of-plasticity approach for nonlinear time-history analysis of space semi-rigid steel frames", Finite Elem. Anal. Des., 105, 1-15. https://doi.org/10.1016/j.finel.2015.06.006.
  10. Nguyen, P.C. and Kim, S.E. (2016), "Advanced analysis for planar steel frames with semi-rigid connections using plastic-zone method", Steel Compos. Struct., 21(5), 1121-1144. https://doi.org/10.12989/scs.2016.21.5.1121.
  11. Nguyen, P.C. and Kim, S.E. (2016), "Investigating effects of various base restraints on the nonlinear inelastic static and seismic responses of steel frames", Int. J. Mech. Sci., 89, 151-167. https://doi.org/10.1016/j.ijnonlinmec.2016.12.011.
  12. Nguyen, P.C., Doan, N.T., Ngo-Huu, C. and Kim, S.E. (2014), "Nonlinear inelastic response history analysis of steel frame structures using plastic-zone method", Thin Wall. Struct., 85, 220-223. https://doi.org/10.1016/j.tws.2014.09.002.
  13. Phan, D.T., Lim, J.B., Tanyimboh, T.T., Lawson, R.M., Xu, Y., Martin, S. and Sha, W. (2013), "Effect of serviceability limits on optimal design of steel portal frames", J. Constr. Steel Res., 86, 74-84. https://doi.org/10.1016/j.jcsr.2013.03.001.
  14. Saritas, A. and Koseoglu, A. (2015), "Distributed inelasticity planar frame element with localized semi-rigid connections for nonlinear analysis of steel structures", Int. J. Mech. Sci., 96, 216-231. https://doi.org/10.1016/j.ijmecsci.2015.04.005.
  15. Sharaf, T., Hanefa, A., Zubydan, A., ElGhandour, M. and Elsabbagh, A.I. (2021), "Axial force and biaxial bending interaction for I-shaped cross-section", ASCE Prac Period. Struct. Des. Constr., 26(4), 04021042. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000609.
  16. Tran, N.L. and Nguyen, T.H. (2020), "Reliability assessment of steel plane frame's buckling strength considering semi-rigid connections", Eng. Technol. Appl. Sci. Res., 10(1), 5099-5103. https://doi.org/10.48084/etasr.3231
  17. Zhang, W.J., Li, G.Q. and Zhang, J.Z. (2021), "Progressive collapse mechanism of steel framed-structures subjected to a middle-column loss", Adv. Steel Constr., 17(2), 199-209. https://doi:10.18057/IJASC.2021.17.2.9.
  18. Zubydan, A.H. (2013), "Inelastic large deflection analysis of space steel frames including H-shaped cross-sectional members", Eng. Struct., 48, 155-165. https://doi.org/10.1016/j.engstruct.2012.09.024.
  19. Zubydan, A.H., Elsabbagh, A.I., Sharaf, T. and Farag, A.E. (2018), "Inelastic large deflection analysis of space steel frames using an equivalent accumulated element.", Eng. Struct., 162, 121-134. https://doi.org/10.1016/j.engstruct.2018.01.059.