DOI QR코드

DOI QR Code

Experimental study of the loads induced by a large-scale tornado simulation on a HAWT model

  • Lopez, Juan P. (Department of Civil and Environmental Engineering, University of Western Ontario) ;
  • Hangan, Horia (Department of Civil and Environmental Engineering, University of Western Ontario) ;
  • El Damatty, Ashraf (Department of Civil and Environmental Engineering, University of Western Ontario)
  • 투고 : 2021.07.25
  • 심사 : 2021.12.07
  • 발행 : 2021.12.25

초록

As wind turbine rotors increase, the overall loads and dynamic response become an important issue. This problem is augmented by the exposure of wind turbines to severe atmospheric events with unconventional flows such as tornadoes, which need specific designs not included in standards and codes at present. An experimental study was conducted to analyze the loads induced by a tornado-like vortex (TLV) on horizontal-axis wind turbines (HAWT). A large-scale tornado simulation developed in The Wind Engineering, Energy and Environment (WindEEE) Dome at Western University in Canada, the so-called Mode B Tornado, was employed as the TLV flow acting on a rigid wind turbine model under two rotor operational conditions (idling and parked) for five radial distances. It was observed that the overall forces and moments depend on the location and orientation of the wind turbine system with respect to the tornado vortex centre, as TLV are three-dimensional flows with velocity gradients in the radial, vertical, and tangential direction. The mean bending moment at the tower base was the most important in terms of magnitude and variation in relation to the position of the HAWT with respect to the core radius of the tornado, and it was highly dependent on the rotor Tip Speed Ratio (TSR).

키워드

참고문헌

  1. AbuGazia, M, El Damatty, A., Dai, K., Lu, W. and Ibrahim, A. (2020), "Numerical model for analysis of wind turbines under tornadoes", Eng. Struct., 223, 111157. https://doi.org/10.1016/j.engstruct.2020.111157.
  2. Ashrafi, A., Hangan H., Romanic, D., Kasab, A. and Ezami, N. (2021), "Experimental investigation of large-scale tornado-like vortices", J. Wind Eng. Ind. Aerod., 208, 104449. https://doi.org/10.1016/j.jweia.2020.104449.
  3. Bortolotti, P., Bottasso C.L. and Croce, A. (2016), "Combined preliminary-detailed design of wind turbines", Wind Energy Sci., 1(1), 71-88. https://doi.org/10.5194/wes-1-71-2016.
  4. Campagnolo, F. and Biegle, H. (2019), Numerical Study of The Loads Induced by Tornadoes on A 3.5 MW Wind Turbine, Research Report No. 1, Technische Universitat Munchen, Munich, Germany.
  5. Chang, C.C. (1971), "Tornado wind effects on buildings and structures with laboratory simulation", Third Int. Conference Wind Effects Build. Struct., 231-240.
  6. Church, C.R., Snow, J.T., Baker, G. and Agee, E.M. (1979), "Characteristics of tornado like vortices as a function of swirl ratio: a laboratory investigation", J. Atmos. Sci., 36(9), 1755-1776. https://doi.org/10.1175/1520-0469(1979)036<1755:COTLVA>2.0.CO;2.
  7. David-Jones, R.P. (1973), "The dependence of core radius on swirl ratio in a tornado simulator", J. Atmos. Sci., 30(7), 1427-1430. https://doi.org/10.1175/1520-0469(1973)030<1427:TDOCRO>2.0.CO;2.
  8. Fujita, T. (1981), "Tornadoes and downbursts in the context of generalized planetary scales", J. Atmos. Sci., 38(8), 1511-1534. https://doi.org/10.1175/1520-0469(1981)038<1511:TADITC>2.0.CO;2.
  9. Gillmeier, S., Sterling, M., Hemida H. and Baker, C. (2018), "A reflection on analytical tornado-like vortex flow field models", J. Wind Eng. Ind. Aerod., 174, 10-27. https://doi.org/10.1016/j.jweia.2017.12.017.
  10. Haan, F.L., Balaramudu, V.K. and Sarkar, P.P. (2010), "Tornado-induced wind loads on a low-rise building", J. Struct. Eng., 136(1). https://doi.org/10.1061/(ASCE)ST.1943-541X.0000093.
  11. Hangan, H. (2014), "The wind engineering energy and environment (WindEEE) dome at western university", Wind Eng. JAWE, 39(4), 350-351. https://doi.org/10.5359/jawe.39.350.
  12. Hangan, H. and Kim, J.D., (2008) "Swirl ratio effects on tornado vortices in relation to the Fujita scale", Wind Struct., 11(4), 291-302. https://doi.org/10.12989/was.2008.11.4.291.
  13. Hau, E. (2013), Wind Turbines: Fundamentals, Technologies, Application, Economics, Springer.
  14. Hu, H., Tian, W. and Ozbay, A. (2014), "An experimental investigation on dynamic wind loads acting on a wind turbine model in atmospheric boundary layer winds", 32nd ASME Wind Energy Symposium, 1-8. https://doi.org/10.2514/6.2014-1221.
  15. Hu, H., Tian, W. and Ozbay, A. (2019), "A wind tunnel study of wind loads on a model wind turbine in atmospheric boundary layer winds", J. Fluid. Struct., 85, 17-26. https://doi.org/10.1016/j.jfluidstructs.2018.12.003.
  16. IEC 61400-1 (2007) Wind Turbines Part 1: Design Requirements, International Electrotechnical Commission.
  17. IRENA (2019), Renewable Capacity Statistics, International Renewable Energy Agency.
  18. Jischke, M.C. and Light, B.D. (1983), "Laboratory simulation of tornadic wind loads on a rectangular model structure", J. Wind Eng. Ind. Aerod., 13(1-3), 371-382. https://doi.org/10.1016/0167-6105(83)90157-5.
  19. Kosiba, K. and Wurman, J. (2013), "The three-dimensional structure and evolution of a tornado boundary layer", Weather Forecast., 28(6), 1552-1561. https://doi.org/10.1175/WAF-D13-00070.1.
  20. Lewellen, W.S. (1962), "A solution for three-dimensional vortex flows with strong circulation", J. Fluid Mech., 14(3), 420-423. https://doi.org/10.1017/S0022112062001330.
  21. Mishra, A.R., James D.L. and Letchford, C.W. (2008), "Physical simulation of a single-celled tornado-like vortex, Part B: Wind loading on a cubical model", J. Wind Eng. Ind. Aerod., 96(8-9), 1258-1273. https://doi.org/10.1016/j.jweia.2008.02.027.
  22. Refan, M. and Hangan, H. (2012), "Aerodynamic performance of a small horizontal axis wind turbine", ASME. J. Sol. Energy Eng., 134(2), 021013. https://doi.org/10.1115/1.4005751.
  23. Refan, M., Hangan, H. and Wurman J. (2014), "Reproducing tornadoes in laboratory using proper scaling", J. Wind Eng. Ind. Aerod., 135, 136-148. https://doi.org/10.1016/j.jweia.2014.10.008.
  24. Refan, M., Hangan, H., Wurman, J. and Kosiba, K. (2017), "Doppler radar-derived wind field of several tornadoes with application to engineering simulations", Eng. Struct., 148, 509-521. https://doi.org/10.1016/j.engstruct.2017.06.068.
  25. Refan, M. and Hangan, H. (2018), "Near surface experimental exploration of tornado vortices", J. Wind Eng. Ind. Aerod., 175, 120-135. https://doi.org/10.1016/j.jweia.2018.01.042.
  26. Roshko, A. (1953), On the Development of Turbulent Wakes from Cortex Streets, Report No. NACA-TN-2913, California Inst. of Tech, U.S.A.
  27. Sarkar, P. and Razavi, A. (2018), "Tornado-induced wind loads on a low-rise building: influence of swirl ratio, translation speed and building parameters", Eng. Struct., 167, 1-12. https://doi.org/10.1016/j.engstruct.2018.03.020.
  28. Sarkar, P., Sengupta, A., Haan, F.L. and Balaramudu, V. (2008) "Transient loads on buildings in microburst and tornado winds", J. Wind Eng. Ind. Aerod., 96(10-11), 2173-2187. https://doi.org/10.1016/j.jweia.2008.02.050.
  29. Shirzadeh, K., Hangan, H. Crawford, C. and Tari, P.H. (2020), "Investigating the loads and performance of a model horizontal axis wind turbine under IEC extreme operational conditions", Wind Energy Sci., 6(2), 477-489. https://doi.org/10.5194/wes-6-477-2021.
  30. Wind Science and Engineering Center, Texas Tech University, (2004), A Recommendation for An Enhanced Fujita Scale, The National Weather Service.
  31. Wiser, R. and Bolinger, M. (2019), 2018 Wind Technologies Market Report, U.S DOE Wind Energy Technologies Office, U.S.A.
  32. Xu, N. and Ishihara, T. (2014), "Analytical formulae for wind turbine tower loading in the parked condition by using quasi-steady analysis", Wind Eng., 38(3), 291-309. https://doi.org/10.1260/0309-524X.38.3.291.